Search results for "comp":

AutoCoop™ LayLight Programmable Coop Light The LayLight is a high efficiency LED light for your chicken coop.  This will provide the extra light your hens need to continue laying eggs into the Winter months.  As daylight decreases, chickens naturally decrease the number of eggs they lay.  To continue laying through the Winter months, they need a little extra light so their internal clock tells them to keep producing.  This light also works to light up your coop on-demand if you need light at night.  Need a timer light for another purpose?  Also works great for sheds, barns or any other area where some light would be helpful.  Features: Super bright, high efficiency, high output LED light Dispersing lens optimizes light distribution Easy-to-program timer (lots of programming options!) Easy to mount Simple plug-n-play set up Also includes manual on/off button on the timer for on-demand light Note: The LayLight is designed to be used inside your coop (or shed, barn, etc) where it will be kept from outside elements (rain and snow).  It is not designed to be used outside the coop and exposed to all weather elements.  Heat and cold are no problem.  But water is a no-no.  Also, the controller for the AutoCoop LayLight looks similar to the AutoCoop Door Opener.  However, they are NOT interchangeable.  The internal electronics are different.  

One of the most exciting parts of incubating eggs is being able to watch the embryo progress during the various development stages. The Incu-Bright™ egg candler makes this joy possible by providing an easy and effective way to candle your eggs. It was designed specifically for candling eggs while keeping affordability in mind. The IncuBright uses the latest in LED light technology. One super bright CREE bulb illuminates your eggs for easy viewing, even with dark or large eggs. The Incu-Bright™ has the only universal silicone rubber egg protector ring that lets you candle any size egg. The IncuBright™ is cordless, making it easy use. Batteries are included. Purchase includes Two Year IncuCare Warranty.

Description One of the most accurate ways to determine if the humidity inside an incubator is correct is by the weight loss of an egg during incubation. During incubation as air passing through the shell of the egg causes some of the water to evaporate inside the egg making the egg lose weight. Jumbo size eggs typically sell for more than medium size eggs; this is why having the ability to accurately size your eggs can increase your profits. This IncubatorWarehouse.com’s EggScale has can accommodate any size egg from quail to goose while still having a compact design which makes it easy to store. The recessed egg tray keeps eggs from rolling while they are being weighed and the blue backlit LCD display makes it easy to read. Easy to follow instructions for measuring humidity by weight loss and egg sizing chart make using the scale a breeze. As always all or our products are covered by our One Year No-Hassle Guarantee so you can purchase with confidence. 

The two biggest factors in achieving a successful hatch are correct temperature and humidity. With these factors in mind, we created the IncuTherm™ series digital thermometer/hygrometers. The IncuTherm Plus™ is able to accurately measure and display the temperature and relative humidity at the same time which can be displayed in both Fahrenheit or Celsius . The probe is placed inside the incubator. This allows the IncuTherm Plus™ to measure temperature and humidity on the inside of your incubator and display it on the outside. The built-in high and low memory stores the highest and lowest temperature and humidity readings since the last memory reset. This helps you ensure ideal conditions for a successful hatch. The IncuTherm Series has been factory calibrated to be accurate to within +/- 1°F (0.5°C) in the incubation temperature ranges. This is twice as accurate as most standard digital thermometers available on the market. This accuracy level makes the IncuTherm Series the easy choice when selecting a digital thermometer for your next hatch. As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the IncuTherm Plus™ Hatch Monitor for yourself.

One of the common hassles with incubation is maintaining the humidity inside the incubator. These hassles include the need to frequently fill the water reservoirs or not being able to maintain the desired humidity. We are proud to introduce the HumidiKit automatic humidity system for egg incubators. This system is designed to instantly deliver accurate humidity to most incubators. The integrated digital hygrostat that measures and controls the humidity is fully adjustable so you can achieve the humidity range that is right for your eggs. The humidifier is designed to gently provide instant humidity and fresh air directly inside the incubator for an accurate humidity range. The humidifier also comes with a one liter bottle which typically needs to be filled once a week for most desktop incubators. To extend the life of your humidiKit we recommend using distilled water. This unit comes ready to install into your incubator; simply place the probes from the HumidiKit inside the incubator, insert the hose into a vent hole, fill the water bottle, and connect to power. The HumidiKit is also covered by the IncubatorWarehouse Two-Year IncuCare Warranty so you can purchase with confidence.

The IncuKit XL Extension allows the user to extend their fans that are attached to either the IncuStat basic or advanced IncuStat. This cord provides further flexibility for mounting and placing of either IncuStats or the Fan Heater unit reducing hassle.

Many people prefer to build their own incubators. This is a fun do-it-yourself project. We’ve found that the biggest difficulty people run into while developing their incubators is being able to find a reliable heat source and thermostat. We’ve solved this problem by creating the IncuKit™ series thermostat fan heaters. We have created the IncuKit™ MINI to turn any small container into an incubator. This provides the heat, air circulation and thermostat control you need to accurately control the environment in your container for hatching eggs. The IncuKit™ MINI comes with a proportional thermostat, built-in 40 watt heater, and a built-in fan. The proportional thermostat controls the amount of power that is supplied to the heater instead of simply turning the heater off and on. This provides more accurate temperature control than a standard off/on thermostat. The thermostat also comes preset to 99.5 degrees F which can be easily adjusted if necessary. The digital display makes it easy to read the current temperature and to make changes. The IncuKit™ MINI operates on low 12 Volt DC power and includes an AC-to-DC converter that works with both 110/120v and 220/240v power input. An optional DC turner motor can easily be added which is controlled by the control module and is fully adjustable. In case of power outages, the IncuKit™ MINI can also be powered with a 12V battery (additional battery connectors required). NOTE: You can optionally purchase the car power adapter or battery clips so you can keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. As always, all of our products are covered by our 2 Year IncuCare Warranty. Purchase today with no worries and experience the IncuKit™ MINI for yourself. How to determine the appropriate size container for the IncuKit MINI: There are several factors that determine how much power will be required to heat your container up to the appropriate temperature to hatch eggs. The size of the container, how well it is insulated, the room temperature and how much the room temperature fluctuates will all have a significant impact. The best way to determine if the IncuKit™ MINI is the right size for your container is pretty simple. Just put a 40 watt light bulb in your container (ensure it is thermally insulated since they get pretty hot!) and measure how warm your container gets. If it easily gets to at least 100 degrees F, then the IncuKit™ MINI should work. It is the user’s responsibility to determine if this product will generate enough heat for your container.   See this video for an overview of the IncuKit MINI:

The New Incubator Warehouse Exclusive Insta Brooder Pen is here and answers all your needs for a durable bird brooder! Fully enclosable with a removable mesh top ensures as your birds grow you can keep the top closed to ensure they do not escape and stay safe in their pen. The mesh roof ensures you never lose sight of them and can see everything happening in the brooder pen. A Velcro section in one bottom corner allows the Vrooder™ Brooder Heater Plate power cord to run out of the pen and keeps your birds from getting out. The Vrooder™ simulates a mother hen keeping her chicks warm and cozy under her feathers. Keeping a constant temperature, using an integrated thermostat and heater the Vrooder can accommodate up to 30 chicks. As your chicks grow, simply raise the heat plate with the easy-to-adjust thumbscrews without needing to remove the heat plate from your brooder. Comes with 2 disposable liners made to fit inside the unit and is textured to provide firm footing for your newly hatched chicks. These disposable drop pan paper board liners catch all your bird dropping and allow you to remove when the floor gets too dirty and covered in droppings. Made from a durable material the Insta Brooder pen can be washed off in the yard to remove any remaining dropping residue after your birds have been moved to their coop/cage. Please allow proper amount of time for the pen to dry before packing up to avoid mildew and mold growth and damage to your Insta Brooder pen. Once dry simply collapse and fold up and slide into its storage bag until your next hatch. Insta Brooder Pen Dimensions: 36 X 36 X 18 in. Vrooder Dimensions: 14.5" x 14.5" x 12.5", Accommodates up to 30 baby chicks, Power Spec: 110V AC, 40 Watts. NOT INTENDED FOR USE OUTDOORS (Garage/Barn are ok if temperatures do not drop below 25 degrees Fahrenheit)

Complete 22 Amp for Desktop or Cabinet Incubator. Includes surge guard. Adjustable between 75 and 120 degrees F (depending on room temperature). You can use this thermostat as a replacement in Hova-Bator incubators or to build your own egg incubator. 110 Volt AC Power ONLY

This liner was specifically designed to fit the Incubator Warehouse Brooder Pen. This liner provides firm footing for newly hatched chicks and keeps the floor from building up with bird droppings. Simply throw the old one away and replace with a clean new one. Highly recommended, these disposable pen liners make for a quick and easy clean up in the Incubator Warehouse Brooder Pen. Liner Size 36” X 36”. 20 InstaBrooder liners per pack.

New Electronic Thermostat Hova-Bator. Circulated air. The new thermostat is very accurate with a bright, easy to read display. 110 Volt AC 30 Watts. Temperature can be changed from Fahrenheit to Celsius. Fan can be turned off for incubating reptile eggs. This incubator also includes two 4x6 inch windows on top for viewing, as well as high sidewalls to keep birds inside when the lid is removed. This incubator can hold approximately 46 chicken, 188 quail, 90 pheasant, and 40 turkey or duck eggs. Additional accessories can be purchased to enhance the hatch rate and overall experience. These include: an automatic egg turner, an Incu-Bright egg candler, and an IncuTherm Plus thermometer/hygrometer. As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the IncubatorWarehouse.com fan installed Hova-Bator incubator for yourself.

The No. 1502 “SPORTSMAN” incubator offers an accurate digital thermostat with LCD display of Temperature and Humidity. An on-board computer monitors systems and the environment every second to keep itself updated and to share this data with you. Electronic egg turning control, audio/visual indicators and a standard easy view door highlight a number of standard features. This is a complete incubator and hatcher. In addition to having three automatically turned racks, it has a hatching tray in the bottom of the incubator. So if you are just getting started with a small flock, all you need is this one incubator. Set the eggs each week or so and then hatch the oldest setting eggs at the same time. Settings are rotated among the three turning trays so that the hatching tray can accept the eggs from one of the setting trays each cycle. Constructed from high strength plastic board making it well insulated, quieter, and easier to clean. Each unit is hand assembled by our skilled craftsmen and tested for a full 24 hours for proper operation and calibration. Thermostat operating range between 60 and 103 degrees F. depending on room temperature. 110-120VAC, 50/60 Hz, 325 Watts. TUV Listed. This incubator includes: - 1 #3258 Digital Command Center thermostat - 3 turning racks & 1 plastic hatching tray (no cover) - 1 moisture pan with 2 wick pads - Instruction booklet. Total Capacity with plastic trays (not included): 1368 Quail Eggs, 354 pheasant eggs, 270 chicken eggs, 198 turkey or duck eggs, and 36-45 larger eggs such as goose, peafowl, and emu. Actual capacity may depend on egg size. Hatching capacity is limited to the hatching drawer which is approximately 72 medium size or 250 quail size eggs at a time. METAL SETTING TRAYS, ITEM NO.3067 ARE SOLD SEPARATELY. THIS ITEM IS NOT NECESSARY FOR OPERATION, PLEASE USE PLASTIC EGG TRAYS (1243 (Quail), 1245 (Pheasant), 1246 (Chicken), 1248 (Extra Large - Goose/Turkey) SOLD SEPARATELY This incubator includes:- 1 #3258 Digital Command Center thermostat- 3 turning racks & 1 plastic hatching tray (no cover)- 1 moisture pan with 2 wick pads- Instruction booklet DIMENSIONS: 301/4” Front to Back, 153/4” Wide, 313/4” High. PLASTIC EGG TRAYS SHOWN IN IMAGE SOLD SEPARATELY.

Invented by G.Q.F. Manufacturing Co. over 30 years ago, the Hova-Bator is still considered by many to be the WORLD’S BEST SMALL INCUBATOR, and among the most economical incubators available. The circulated air Hova-Bator uses a slower speed, gentle flow fan to hold a more uniform temperature. The gentle flow fan provides enough air movement to keep a constant temperature, but helps prevent dehydration of the eggs. It uses FORCED AIR FLOW, where the radiant heat tube gently warms the inside of the incubator while the fan draws fresh air from the bottom vents and circulates it throughout. Since heat rises, temperatures can vary up to 5 degrees inside the Still Air Hova-Bator. However, with the Incubator Warehouse Gentle Flow Fan kit, the incubator holds a more constant temperature, minimizing hot and cold spots. This ultimately leads to improved hatch rates. This model has a mesh screen to support the eggs for a safe hatch. The forced air flow assists with the drying of the chicks after they hatch. This incubator is manufactured of durable Styrofoam that efficiently retains the heat produced by the 25 watt heating element. It also includes two 4x6 inch windows on top for viewing, as well as high sidewalls to keep birds inside when the lid is removed. The reliable wafer thermostat is a proven, accurate technology that produces great hatch results. This incubator can hold approximately 46 chicken, 188 quail, 90 pheasant, and 40 turkey or duck eggs. Additional accessories can be purchased to enhance the hatch rate and overall experience. These include: an automatic egg turner, an Incu-Bright egg candler, and an IncuTherm Plus thermometer/hygrometer. As always, all of our products are covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Incubator Warehouse Hova-Bator incubator for yourself. User Guide [PDF] International Customers This incubator uses 110 Volt AC Power. For international customers (220/240V) please purchase the Incubator Warehouse international power converter to maintain product warranty.

6 Foot power cord for Little Giant Egg Incubators 9300, 10300, and Nurture Right 360 Incubator. Standard 2-Prong U.S. Design. High Quality Incubator Warehouse Replacement (NOT OEM). Color: Black For Nurture Right 360 Incubator users: This is the power cord ONLY, not the power supply. This is the cord that plugs into the power supply/brick.

Sturdy metal construction to hold heavy eggs, this tray is used to set large eggs such as turkey, goose, peafowl, emu and ostrich. Eggs are laid on their side. For use with 1500 and 1502 setting incubators. Capacities for 1500 Professional: Ostrich - 8 eggs using two trays Emu - 36 using three trays Goose - 45 to 60 using three trays. Capacities for 1502 Sportsman: Ostrich - 6 using two trays Emu - 16 using two trays Goose - 45 to 60 using three trays.  Please note that both the dividers and the metal tray are included.