3255 - Deluxe Multi-Turn Electronic Thermostat with Plug
$109.99
Upgrade your wafer thermostat or replace an old electronic thermostat with this Multi-Turn thermostat. This unit offers more accurate adjustment of temperature over single turn thermostats, as one complete revolution changes temperature only 1.7°F. 110 Volts, 400 Watts maximum. This thermostat is the recommended replacement for non-preset electronic thermostat models and wafer thermostat models. Electronic Thermostats are guaranteed for use in GQF Cabinet incubators only. Replaces PN 3140
3258 - Replacement Command Center
$219.99
3258 Command Center. For replacement of all GQF digital command centers. Important: Can only be installed in cabinets with an existing 3258 Command Center. Cannot be installed in cabinets without command centers or non-GQF incubators. 3282 SENSOR NOT INCLUDED (Sold Separately)
3281 - Inside Sensor Assembly (2015 & Earlier)
$80.99
Replacement inside sensor assembly for GQF 1500 series incubators with factory installed 3258 Digital Command Center. The date stamped on the back of the thermostat must be prior to 2016 to be compatible with this sensor.
3282 - Inside Sensor Assembly (2016 & Later)
$80.99
Replacement inside sensor assembly for GQF 1500 series incubators with factory installed 3258 Digital Command Center. The date stamped on the back of the thermostat must be AFTER 2016 to be compatible with this sensor.
3300 - Plastic Hatching Tray
$50.99
Plastic hatching tray for current production GQF 1202A, 1402, 1450, 1502, and 1550 cabinet model incubators and hatchers. No cover necessary.
Dimensions: 29'' long, 14” wide, 5'' tall
4 inch Butterfly Vent for Cabinet Incubator (5 inch total diameter)
$14.99
4" Butterfly Vent for Cabinet Incubator (5" total diameter). Metal.
4008 - Adjustable Pressure Reducing Valve with Gauge
$92.99
Water pressure gauge. Complete with 1/2”, 5/16” & 1/4” hose barbs (can be removed for attaching to 1/2” pipe). Can handle high or low volume water requirements. Reduces normal water pressure down to an adjustable 1lb. to 10 lbs. pressure. Durable design and construction.
Dimensions: 11” x 71/2” x 6”.
Note: Unit shipped may be different model, same features.
4010 - Clamps for 5/16'' Tubing - Package of 18
$4.99
$8.99
Clamps used to secure 5/16'' tubing and fittings. Package of 18
4012 - Female Hose Connector for 1/4'' Hose
$3.99
$8.99
Use this fitting whenever you need to connect 1/4” hose or tubing to any water faucet that has a garden hose connection.
4014 - Clamps for ¼” Tubing - Package of 18
$6.99
Clamps used to secure 1/4'' tubing and fittings. Package of 18.
4020 - Pressure Reducing Valve
$50.99
For use with drink cups. This valve can be used for a small system of 1 to 2 drinking cups or a large system designed to support up to 1500 quail. This Pressure Reducing Valve can support up to 210 drinking cups. Pre-set to provide approximately 8 lb. water pressure to drink cups. Pressure setting is adjustable. Includes 5/16'' and 1/4'' hose barbs and 2 ft. normal pressure hose with connector. (Tubing not supplied, see GQF #4028, #4080, #4081 and clamps #4010 #4014) Should not be used with nipple drinkers.
4027 - Normal Pressure Hose 100 ft. Coil 1/4'' I.D.
$66.99
100 ft. coil, 1/4” inner diameter. This nylon reinforced hose may be used on normal or low pressure watering systems. Generally intended for use with item 0341 & auto water troughs. Not supplied with fittings. Color: Red
4028 - Low Pressure Hose 50 ft. Coil 1/4" I.D.
$1.00
50 ft. coil, 1/4” inner diameter. This inexpensive tubing is ideal for low pressure systems. This tubing should be used when expanding drink cup kits. Not supplied with fittings. Color: Blue
4030 - Kit to Attach ¼” Tube to a Water Tank
$11.99
Has connector with 5/16” hose barb & 3/8” pipe threads, “O” ring seal, and plastic nut with 3/8” pipe threads. Requires 11/16” hole in water tank. Tank and tubing is not supplied. May require silicone glue to prevent leaking.
4031 - Kit to Attach 5/16” Tube to a Water Tank
$6.99
$12.99
Has connector with 5/16” hose barb & 3/8” pipe threads, “O” ring seal, and plastic nut with 3/8” pipe threads. Requires 11/16” hole in water tank. Tank and tubing is not supplied. May require silicone glue to prevent leaking.
4067 - Plastic T Connectors 1/2'' x 1/2'' x 1/4'' - Package of 10
$9.99
$20.99
For use with 1/2'' hose or tubing when you need to run a hose to another pen. 1/2” x 1/2” x 1/4”
4068 - Plastic T Connectors 1/4'' x 1/4'' x 1/4'' - Package of 10
$6.99
$12.99
For use with 1/4” hose or tubing when you need to run hose to another pen. ¼” x ¼” x ¼”
4069 - Plastic Hose Splicer for ¼” Hose or Tubing
$4.99
$9.99
Use for splicing 1/4'' Hose or Tubing.
4070 - Caps for 1/4'' T - Package of 6
$2.99
$4.99
6 red caps for 1/4'' T on the low pressure waterer
4078 - Small O-Ring for GQF 4085 Drink Cup
$1.49
$3.99
Small O-Ring for GQF 4085 Drink Cup.
approx. 7mm
4080 - Low Pressure Tubing 50 ft. Coil 5/16” I.D.
$31.19
$38.99
5/16” inner diameter. Use this inexpensive tubing for low pressure systems with 5/16” fittings. Can be used to expand the low pressure waterers. Not supplied with fittings. Color: Green
4082 - Drink Cup Kit for 30” Breeding Pens - 2 cups
$29.99
$53.99
For use with GQF No. 0303 Pen. Includes 2 cups completely assembled with tubing. Must have Pressure Reducing Valve, No. 4020 (not included). The Drink Cup Kits are complete except for the No. 4020 Pressure Reducing Valve, which must be purchased separately. The Pressure Reducing Valve can handle up to 210 Drink Cups. Drink cup kits are mounted on back of pen above trough, allowing trough to be used for feed.
4083 - Drink Cup Kit for 30” Battery Breeding Pens - 10 Cups
$123.99
For use with GQF No. 0315 Pen. Includes 10 cups completely assembled with tubing. Must have Pressure Reducing Valve, No. 4020 (not included). The Drink Cup Kits are complete except for the No. 4020 Pressure Reducing Valve, which must be purchased separately. The Pressure Reducing Valve can handle up to 210 Drink Cups. Drink cup kits are mounted on back of pen above trough, allowing trough to be used for feed.
4084 - Cage/Wall Bracket for Drink Cup - Package of 5
$26.99
Clips to wire of cages; screw holes in bracket also permit mounting to sides of pens.
4085 - Drink Cups - Package of 5
$19.99
$34.99
Use Drink Cups to design your own watering system. Each drink cup can handle up to 40 quail. Pressure Reducing Valve can be purchased separately and used for a system using up to 210 Drink Cups. Purchase brackets, tubing, and fittings for your system separately. Cups have a spring loaded trigger stem to shut off water. Water flows only when a bird’s beak is in the cup to avoid messy wet spots caused by nipple watering systems.
Designing A System: Drink cups require a source of water at a pressure below 5 PSI, which can be provided by a pressure reducing valve or by gravity tanks positioned less than five feet above Drink Cups. Use with 5/16” tubing.
4087 - Pipe Brackets for Drink Cups - Package of 5
$5.99
$8.99
For use with 1/2" PVC pipe (not included). To use, drill 5/16" holes 8" apart in the side of PVC pipe and attach bracket with PVC adhesive. Use schedule 40 cold water PVC pipe with Pipe Brackets.
4088 - Plastic T Connectors 1/2'' x 1/2'' x 5/16'' - Package of 10
$23.99
For use with 1/2'' hose or tubing when you need to run a hose to another pen. 1/2” x 1/2” x 5/16”
4089 - Plastic T Connectors 5/16'' x 5/16'' x 5/16'' - Package of 10
$9.99
$22.99
For use with 5/16” hose or tubing to branch off to another pen.
4091 - Plastic Hose Splicer for 5/16'' Tubing - Package of 10
$5.99
$11.99
Use for splicing 5/16” tubing.
4093 - Reducer Connector 5/16" to 1/4" - Package of 2
$1.00
Used to connect 5/16" tubing to 1/4" tubing.
4096 - 1/2'' PVC Pipe Adapter
$12.99
Used to attach 1/2” PVC pipe with GQF No. 4087 Pipe Brackets installed to the GQF No. 4090 Pressure Reducing Valve.
4317 - Automatic Water Trough 18”
$54.99
Attach to water faucet and turn water on. Plastic float with brass valve maintains constant water level. Made of durable plastic with rotating reel on top to keep birds off. Sits on ground, or may be easily mounted on 4'' or 6'' block or suspended for use with larger birds or to keep debris out. Equipped with 4 foot hose; ready to attach to faucet. Maximum Pressure: 50 PSI
4318 - Automatic Water Trough 18” - Package of 2
$89.99
Attach to water faucet and turn water on. Plastic float with brass valve maintains constant water level. Made of durable plastic with rotating reel on top to keep birds off. Sits on ground, or may be easily mounted on 4'' or 6'' block or suspended for use with larger birds or to keep debris out. Equipped with 4 foot hose; ready to attach to faucet. Maximum Pressure: 50 PSI
4319 - 18” Reel for Automatic Water Trough
$6.99
$12.99
18” Reel for Automatic Water Trough, GQF item No. 4317.
4458 - Quail and Pheasant Chick Waterer 58 oz.
$8.99
Contains 58 oz. plastic jar and plastic chick waterer base. Reservoir is 3/4" high and has 1/2" wide drinking space to provide adequate water without causing drowning. Not necessary to use rocks or marbles as with poultry waterers. 58 oz. jar holds large supply of water and will fit in battery brooders; eliminates frequent refilling.
4459 - Quail and Pheasant Chick Waterer 58 oz. - Package of 6
$1.00
Contains 58 oz. plastic jar and plastic chick waterer base. Reservoir is 3/4" high and has 1/2" wide drinking space to provide adequate water without causing drowning. Not necessary to use rocks or marbles as with poultry waterers. 58 oz. jar holds large supply of water and will fit in battery brooders; eliminates frequent refilling. Package of 6
4460 - Game Chick Waterer Base, Plastic
$1.00
Fits Mason jar. Plastic reservoir is 3/4" high and has 1/2" wide drinking space to provide adequate water without causing drowning. Not necessary to use rocks or marbles as with poultry waterers. Can be used with 58 oz. Large Plastic Jar (GQF No. 4464)
4461 - Game Chick Waterer Base, Plastic - Package of 6
$14.99
Fits Mason jar. Plastic reservoir is 3/4" high and has 1/2" wide drinking space to provide adequate water without causing drowning. Not necessary to use rocks or marbles as with poultry waterers. Can be used with 58 oz. Large Plastic Jar (GQF No. 4464)
4464 - 58 oz. Large Plastic Jar for Chick Waterer - Package of 6
$29.99
58 oz. plastic jar with Mason jar threads. Holds large supply of water and will fit in Battery Brooders; eliminates frequent refilling. Can be used with Game Chick Waterer Base (GQF No. 4460)
4469 - Feed/Water Cup, ½ pint
$3.99
Feed/Water Cup holds ½ pint of feed or water. Strong and durable plastic cup can hang inside or outside of pen for poultry and other small animals.
4470 - Feed/Water Cup, ½ pint - Package of 6
$12.99
$17.99
Feed/Water Cup holds ½ pint of feed or water. Strong and durable plastic cup can hang inside or outside of pen for poultry and other small animals.
4473 - Feed/Water Cup, 1 quart
$5.99
$8.99
Feed/Water Cup holds 1 quart of feed or water. Strong and durable plastic cup can hang inside or outside of pen for poultry and other small animals.