HumidiKit™ - Auto Humidity System for Incubators $146.99
One of the common hassles with incubation is maintaining the humidity inside the incubator. These hassles include the need to frequently fill the water reservoirs or not being able to maintain the desired humidity. We are proud to introduce the HumidiKit automatic humidity system for egg incubators. This system is designed to instantly deliver accurate humidity to most incubators. The integrated digital hygrostat that measures and controls the humidity is fully adjustable so you can achieve the humidity range that is right for your eggs. The humidifier is designed to gently provide instant humidity and fresh air directly inside the incubator for an accurate humidity range. The humidifier also comes with a one liter bottle which typically needs to be filled once a week for most desktop incubators. To extend the life of your humidiKit we recommend using distilled water. This unit comes ready to install into your incubator; simply place the probes from the HumidiKit inside the incubator, insert the hose into a vent hole, fill the water bottle, and connect to power. The HumidiKit is also covered by the IncubatorWarehouse Two-Year IncuCare Warranty so you can purchase with confidence.
Fan/Heater Unit for IncuKit™ XL $57.99
Fan Heater Combo Unit for the IncuKit™ XL. 125 Watt Heater and High Power Circulated Air Fan.  110V AC Power Click here to see the 220V International Version.
Incubator Warehouse Digital Hygrometer $15.99
This Hygrometer works great for measuring humidity in any incubator. The humidity gauge displays the humidity in the air as a percentage. This hygrometer is also a replacement for the hygrometer in the No. 1140 Incubator Warehouse IncuView Incubator Lid (Current model only - Does not replace the old dial hygrometer).
5 RPM Egg Turner motor for IncuKit™ MINI $13.99
This motor is a 5 RPM 12V DC motor for the IncuKit DC. Use this motor to make your own egg turner. The IncuKit DC allows you to set an interval so the motor will turn on for a few seconds every few hours (Customize to your own turning needs)
Cabinet Egg Turner Motor 110V AC | 1 RPM $39.99
This Egg Turner Motor is perfect for cabinet egg incubator applications, providing very high torque (60 lbs/in) it can easily turn a variety of egg turner designs. The motor is 1 RPM (makes 1 revolution per minute), so it is best used with a timer to prevent overturning your eggs. This motor works great with the IncuStat Advanced & IncuKit XL Advanced because they have built in egg turner timer controls.  Motor shaft has a D shape and also a hole through the shaft for easy egg turner linkage.  110V AC Power.
Battery clip connector set for Genesis 1588 egg incubator or IncuKit Mini / IncuView $14.99
This listing is for brand new battery connector set for the Genesis 1588 and the IncuKit Mini / IncuView. This connector allows you to power your incubator with a battery.NOTE: Please select the type of connector you need from the drop-down menu The alligator style clips will easily connect to the positive and negative terminals on your 12VDC battery The barrel connector ends plugs into the power wire of the Genesis 1588 or the power port of the IncuKit DC / IncuView This is great for a back-up power supply for those who may have frequent power outages A 12VDC battery can be your primary power source for those who are off the grid Would you like to see how this is used with the Genesis 1588 and IncuKit DC / IncuView? See this short video:
IncuKit™ XL for Cabinet Incubators from $79.99
The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  
IncuKit™ MINI for Desktop Incubators | Thermostat, Fan & Heater $69.99
Many people prefer to build their own incubators. This is a fun do-it-yourself project. We’ve found that the biggest difficulty people run into while developing their incubators is being able to find a reliable heat source and thermostat. We’ve solved this problem by creating the IncuKit™ series thermostat fan heaters. We have created the IncuKit™ MINI to turn any small container into an incubator. This provides the heat, air circulation and thermostat control you need to accurately control the environment in your container for hatching eggs. The IncuKit™ MINI comes with a proportional thermostat, built-in 40 watt heater, and a built-in fan. The proportional thermostat controls the amount of power that is supplied to the heater instead of simply turning the heater off and on. This provides more accurate temperature control than a standard off/on thermostat. The thermostat also comes preset to 99.5 degrees F which can be easily adjusted if necessary. The digital display makes it easy to read the current temperature and to make changes. The IncuKit™ MINI operates on low 12 Volt DC power and includes an AC-to-DC converter that works with both 110/120v and 220/240v power input. An optional DC turner motor can easily be added which is controlled by the control module and is fully adjustable. In case of power outages, the IncuKit™ MINI can also be powered with a 12V battery (additional battery connectors required). NOTE: You can optionally purchase the car power adapter or battery clips so you can keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. As always, all of our products are covered by our 2 Year IncuCare Warranty. Purchase today with no worries and experience the IncuKit™ MINI for yourself. How to determine the appropriate size container for the IncuKit MINI: There are several factors that determine how much power will be required to heat your container up to the appropriate temperature to hatch eggs. The size of the container, how well it is insulated, the room temperature and how much the room temperature fluctuates will all have a significant impact. The best way to determine if the IncuKit™ MINI is the right size for your container is pretty simple. Just put a 40 watt light bulb in your container (ensure it is thermally insulated since they get pretty hot!) and measure how warm your container gets. If it easily gets to at least 100 degrees F, then the IncuKit™ MINI should work. It is the user’s responsibility to determine if this product will generate enough heat for your container.   See this video for an overview of the IncuKit MINI:
IncuKit XL Reptile Adapter Extension $15.99
This extension adapts the IncuKit XL to work for larger reptile incubators. Without this adapter, the fan stays on constantly. This adapts the wiring so that the fan and heater turn off once the set temperature is reached. This helps to keep the incubator from overheating when the set temperature is close to the room temperature. And it keeps the air from circulating too much, which would tend to dry the eggs out.
Sold out
Car Power Adapter for IncuKit Mini & IncuView $17.99
The car power adapter allows you to keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. Works for IncuView & IncuKit Mini (DOES NOT WORK WITH GENESIS 1588)). Requires up to 5 Amps at 12V DC
IncuKit™ XL for Reptile Incubators $90.99
The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.     

When evaluating the cost of an egg incubator, it is important to consider the accessories you plan to buy. There are many egg incubator accessories that can improve the incubation process.  The most common incubator accessories are egg turnersforced air fan kitsegg candlersincubator thermostats & incubator thermometers.  Even though you can purchase a high-quality egg incubator for around $40, customers usually find it least expensive to buy an egg incubator combo kit that includes everything they need.  

Believe it or not an egg must be turned at least 2-3 times per day to prevent the embryo from sticking to the side of the shell.  This is accomplished by turning the eggs by hand or by using an automatic egg turner.  Automatic egg turners work by rocking or rolling the eggs to keep the embryo from sticking to the shell.  A very slow RPM motor is used to automate the egg turner.  

An egg candler (sometimes called an egg tester or egg testing light) is used to illuminate an egg so you can see the developing embryo inside the egg.  When using an egg candler you will be able to see the developing veins & eventually movement of the developing bird.  We believe that the best egg candler for the money is the IncuBright Egg Candler.  See pictures and instructions for using an Egg Candler.

An incubator thermostat is the most critical component inside an egg incubator.  Finding the right thermostat can be very difficult.  There are several types of incubator thermostats: Bi-metal Incubator Thermostat (sometimes called a incubator wafer thermostat), On/Off Electronic Incubator Thermostat, & Proportional Incubator Thermostat.  The most accurate and consistent type of incubator thermostat is the Proportional Incubator Thermostat because it keeps a more constant temperature by turning the power to the heater up or down instead of turning it on and off.  Bi-Metal & Electronic on/off incubator thermostats also work well, but they require the correct amount of heater wattage to avoid excess overshooting or undershooting of the incubator thermostat set-point.