or search frequently asked questions:
For the IncuView incubator, do I remove the vent plug during lockdown for increased air circulation?
Does the fan blow downward (away from the heater) in the provided configuration? If so, can it easily be switch to blow upward (into the heater) to provide less direct air blowing onto occupants of the incubator chamber? For instance, can the wires to the fan be reversed to switch direction of the fan?Also, can the fan speed be significantly slowed or is there a point where the fan will no longer turn below a certain point?
Can you set the humidity range or do you set a specific humidity level you want and will it stay at that?
How much room is there on the inside the incubator, from the bottom of the incubator to the top of the plastic lid at the highest point?
What is the average life span of this incubator? Also, how is technical maintenance handled? Can we add an additional motor, etc.?
Does the timer have a setting that works off a light sensor, opens when the sun comes up closes at dark?
Does the automatic refill system for cabinet incubator automatically maintain a constant water level until the reserve water is completely empty?
A couple questions.Is the temperature adjustable and if so how much adjustment is there. (Im sure it is but thought i should ask)If I hook this to one of your egg turner motors can the control unit control how many times the eggs are turned in a day or does it just keep the motor on?
Another question, does the fan stay on continually or is it only on when the fan is running? What kind of heat source does the unit have? Thanks again .
Bought one of your 1588 Hovabators with the flat black egg turners... instructions talk about some metal grate and what side to have up... there is no metal grate but just a plastic one.
Will this work with a Brinsea Ovation Advance? There does not appear to be a place to insert the hose or the sensor.
I'm looking to buy this motor for my farm innovator 4250 turner, but my numbers aren't the same as yours. Will this work with my turner?
Will the probe unplug from the unit so that you could back feed the probe through the vent hole of a genesis 1588?