Customer Service 208-740-1EGG (1344) M-Th 9-5 & Fri 9-3 MT

IncuStat™ Advanced

More Views


IncuStat™ Advanced

Availability: In stock

  • Controls Fan, Heater, & Turner Motor
  • Proportional thermostat - minimizes temperature swings
  • Pre-set to 99.5 degrees F (easily adjustable, if desired)
  • Hatch timer
  • Thermostat can be calibrated
  • Works with both 110 and 220 Volt Power 
  • Remote sensor for accurate temperature reading
  • Easily mounts into your incubator (see video below)
  • Controls heaters up to 300 watts


This device lets you add a sophisticated control module to your cabinet (or larger-style) egg incubator.  This is designed to control the temperature, air circulation and automatic turner motors in your incubator.  

Key features
- Proportional thermostat - minimizes temperature swings (see details below)
- Comes pre-set to 99.5 degrees F (easily adjustable, if desired)
- Electronically controlled 
- Digital display
- Controls the heater, fan and egg turner motors (it is not required to use this module to control all accessories, if you desire not to)
- Hatch timer
- Thermostat is calibration enabled
- Designed to work with both 110/120v and 220/240v power input (you will need a plug adapter for international plug configurations) 
- Remote sensor for accurate temperature reading
- Easily mounts into your incubator (see video below)
- Maximum heater wattage: 300 watts (see note below if you need more power)

NOTE: if your incubator needs more power than 300 watts, you have the option of using a heater that is always on in order to bump up the entire wattage inside the incubator.  For example, if you think you will need about 350 watts for your incubator, you can put a 60 watt light bulb inside the incubator that is always on.  Then when the heater that you are regulating with the thermostat is on, you will have enough power in your incubator.  Feel free to contact us if you would like further clarifications about this option.  

See this video to see how easy it is to install the Incubator Control Module:

What is the difference between a proportional thermostat and an on/off thermostat?

An off/off style thermostat turns the heater on full power when the temperature gets too low.  Then it turns it completely off when the temperature gets too high.  This style creates a wider swing in temperature because the temperature has to get too high or low before the thermostat responds.  The proportional style thermostat adjusts the power up and down as the temperature starts getting close to the set-point (your target temperature).  It will reduce the amount of power going to the heater as the temperature gets close to the set-point.  Then it will increase the power as the temperature starts falling away from the set-point.  This allows the temperature swing to be much less than the on/off style thermostat.  When incubating eggs, accuracy counts!  That is why a proportional style thermostat is preferred.

Product Instructions:

IncuStat™ Advanced

Additional Information

Add'l Information

Weight (lb) 0.8750
Condition New
Country of Origin No
Dimensions No
Circulated Air No
Material No
Model PTST
Style No
Voltage No
Battery No
Capacity No
Sanitation Liner No
Thermostat Type No
Window Size No
Watts No

Customer Reviews 6 item(s)

Love it! No temperature spikes, nice and even temperature within .3, and you can't beat that. Only issue is the for longer sensor wire. Otherwise, can't beat it.
Review by pcleau / (Posted on 5/12/2016)
great themostat
great product ....march april,, and may, the incubator worked every day without fail. 1440 eggs @89%hatch rate, hard to beat that. (chuckinfarm)
Review by Wally / (Posted on 12/29/2015)
Must have for everyone! Great product.
needs a longer wire for the sensor. The instructions are incomplete. Doesn't tell you how to get out of the set-up mode. It is very precise in controlling the temp. I have a fluctuation of only 0.2 degrees in a room that fluctuates 15 to 20 degrees. I say it is a must for anyone that wants fool proof temp control. Great product.
Review by simplestupid / (Posted on 1/26/2015)
would recomend these to anyone
I have purchased 5 of these and only had an issue with one they replaced it without question and have had several in operation for a few years now . They hold temp within .3 which is as good as I expected we have 90% hatch in our homade cabinets will continue to buy these
Review by Kirk / (Posted on 11/11/2014)
Great product. I'm using the temp control option, fan control and the turner control option. All are working great. Temperature is holding +/- 0.4 degrees. Price is a little high but worth it.

It would be nice to have at least a humidity sensor.
Review by David / (Posted on 8/11/2014)
Does its job.
This thing works great and made my homemade cabinet incubator building process easy as 1 2 3. I would highly recommend this to anyone building there own incubator. There's 2 things I wish it had but don't and that is 1 humidity sensor and humidity controlling relay so you could control say a humidifier and 2 a high temp alarm.

Love the product guys keep up the good work!!!!!
Review by Jessee Woodrow / (Posted on 5/21/2013)
Product Questions

Product Questions

No Questions