0428 - Pack of (2) Blue Bulbs 12 Volt for Brooders with Electronics $19.99
PACK OF (2) BLUE BULBS 12VOLT FOR BROODERS WITH ELECTRONICS AFTER 2020 SEASON
Sold out
3175 - Turner Motor Assembly $129.99
Replacement turner motor assembly for cabinet model incubators featuring the 3258 digital command center. 110 VAC NOTE: If the incubator has a single fan and a 3258 command center, use the original galvanized brackets with the new motor.
AccuMist - Automatic Humidity Management for IncuView 3 Pro $74.99
Automate your humidity in the IncuView 3
Float Kit for Bucket Waterer $34.99
DIY Float Kit for bucket waterer. Installing this float system to your bucket waterer and attaching it to a hose will provide your flock with an endless supply of fresh water. Purchase includes float, hose quick connect, wrench, and 13/16" spade drill bit.
IncuStat™ Advanced for IncuKit XL $110.99
IncuStat Advanced for IncuKit XL. This device lets you add a sophisticated control module to your cabinet (or larger-style) egg incubator. This is designed to control the temperature, air circulation and automatic turner motors in your incubator. Key features- Proportional thermostat - minimizes temperature swings (see details below)- Comes pre-set to 99.5 degrees F (easily adjustable, if desired)- Electronically controlled - Digital display- Controls the heater, fan and egg turner motors (it is not required to use this module to control all accessories, if you desire not to)- Hatch timer- Thermostat is calibration enabled- 110/120v power input - Remote sensor for accurate temperature reading- Easily mounts into your incubator (see video below)- Maximum heater wattage: 300 watts (see note below if you need more power) NOTE: if your incubator needs more power than 300 watts, you have the option of using a heater that is always on in order to bump up the entire wattage inside the incubator. For example, if you think you will need about 350 watts for your incubator, you can put a 60-watt light bulb inside the incubator that is always on. Then when the heater that you are regulating with the thermostat is on, you will have enough power in your incubator. Feel free to contact us if you would like further clarification about this option. See this video to see how easy it is to install the Incubator Control Module:   What is the difference between a proportional thermostat and an on/off thermostat? An off/off style thermostat turns the heater on full power when the temperature gets too low. Then it turns it completely off when the temperature gets too high. This style creates a wider swing in temperature because the temperature has to get too high or low before the thermostat responds. The proportional style thermostat adjusts the power up and down as the temperature starts getting close to the set-point (your target temperature). It will reduce the amount of power going to the heater as the temperature gets close to the set-point. Then it will increase the power as the temperature starts falling away from the set-point. This allows the temperature swing to be much less than the on/off style thermostat. When incubating eggs, accuracy counts! That is why a proportional-style thermostat is preferred.
IncuView 3 Deluxe Egg Incubator Kit from $190.00
IncuView™ 3 Pro The easy-to-use IncuView 3 Pro is durable, accurate and reliable. It has a whole line-up of features not available on any other incubator such as a 360° crystal clear hinged lid, AI incubator control module, and the EZ-View humidity system. The accurate IncuView 3 Pro Control Module has proprietary AI technology (Artificial Intelligence) to automatically select the best settings for the proportional thermostat to achieve a successful hatch. The control module accurately displays both temperature (°F or °C) and humidity. Never miss a pip, zip or hatch with the built-in LED viewing lights and hatch timer with automatic egg turner shutoff 3 days before hatch. All of these features and more make the IncuView 3 Pro Control Module the best incubator to trust your eggs to. Beyond the electronics the IncuView 3 Pro is packed with features to make every hatch a delight. The 360° hatch view is simply amazing. The durable plastic base is easy to clean and dishwasher safe. The EZ-View humidity system allows you to easily check and fill the water in the system. All of this makes having a successful hatch easier than ever.. Purchase the optional AquaTank and then just insert the AquaTank into the correct EZ-View port and forget about humidity management until the tank needs to be refilled. Egg Capacity: 27 chicken*, 49 Quail*, or 17 Goose* 12V 5 Amp DC power (Allows 110V OR 220V Input) Incubator Warehouse Hatch Guidebook This is a printed version of our 4 Part of our Intro to Hatching YouTube Series (see video links below) Illustrated Guide to Hatching Basic introduction to incubating eggs and brooding chicks Product has references to our products but is overall very educational and informational 28 Pages YouTube Video Series Intro to Hatching Part 1/4: Setup https://www.youtube.com/watch?v=MqnbL8qTvaI&t Intro to Hatching Part 2/4: Incubation Period https://www.youtube.com/watch?v=vq8NvC2mH0U&t Intro to Hatching Part 3/4: Hatching Period https://www.youtube.com/watch?v=e3JzvNvvRpU&t Intro to Hatching Part 4/4: After Hatch https://www.youtube.com/watch?v=L7gtp3QQWgY&t EZ Clean Chick Brush Cute Chick Brush for cleaning incubator or Eggs. 3 in x 4 in IncuBright™ Egg Candler One of the most exciting parts of incubating eggs is being able to watch the embryo progress during the various development stages. The IncuBright™ egg candler makes this joy possible by providing an easy and effective way to candle your eggs. It uses the latest in LED light technology, having one super bright CREE bulb the IncuBright™ illuminates your eggs for easy viewing, even with dark or large eggs. It has the only universal silicone rubber egg protector ring that lets you candle any size egg and is cordless making it easy use (batteries included). E-Z Water Filler 12 oz The EZ Incubator Water Trough Filler makes the task of adding water accurately to any incubator a breeze. No more spilling water, overfilling, or guessing where your water will go.
IncuView 3 Ultimate Egg Incubator & Brooder Combo Kit from $275.00
IncuView™ 3 Pro   The easy-to-use IncuView 3 Pro is durable, accurate and reliable. It has a whole line-up of features not available on any other incubator such as a 360° crystal clear hinged lid, AI incubator control module, and the EZ-View humidity system.   The accurate IncuView 3 Pro Control Module has proprietary AI technology (Artificial Intelligence) to automatically select the best settings for the proportional thermostat to achieve a successful hatch. The control module accurately displays both temperature (°F or °C) and humidity. Never miss a pip, zip or hatch with the built-in LED viewing lights and hatch timer with automatic egg turner shutoff 3 days before hatch. All of these features and more make the IncuView 3 Pro Control Module the best incubator to trust your eggs to.   Beyond the electronics the IncuView 3 Pro is packed with features to make every hatch a delight. The 360° hatch view is simply amazing. The durable plastic base is easy to clean and dishwasher safe. The EZ-View humidity system allows you to easily check and fill the water in the system. All of this makes having a successful hatch easier than ever.. Purchase the optional AquaTank and then just insert the AquaTank into the correct EZ-View port and forget about humidity management until the tank needs to be refilled.   Egg Capacity: 27 chicken*, 49 Quail*, or 17 Goose*   12V 5 Amp DC power (Allows 110V OR 220V Input) Incubator Warehouse Hatch Guidebook This is a printed version of our 4 Part of our Intro to Hatching YouTube Series (see video links below) Illustrated Guide to Hatching Basic introduction to incubating eggs and brooding chicks Product has references to our products but is overall very educational and informational 28 Pages YouTube Video Series Intro to Hatching Part 1/4: Setup https://www.youtube.com/watch?v=MqnbL8qTvaI&t Intro to Hatching Part 2/4: Incubation Period https://www.youtube.com/watch?v=vq8NvC2mH0U&t Intro to Hatching Part 3/4: Hatching Period https://www.youtube.com/watch?v=e3JzvNvvRpU&t Intro to Hatching Part 4/4: After Hatch https://www.youtube.com/watch?v=L7gtp3QQWgY&t EZ Clean Chick Brush Cute Chick Brush for cleaning incubator or Eggs. 3 in x 4 in   IncuBright™ Egg Candler One of the most exciting parts of incubating eggs is being able to watch the embryo progress during the various development stages. The IncuBright™ egg candler makes this joy possible by providing an easy and effective way to candle your eggs. It uses the latest in LED light technology, having one super bright CREE bulb the IncuBright™ illuminates your eggs for easy viewing, even with dark or large eggs. It has the only universal silicone rubber egg protector ring that lets you candle any size egg and is cordless making it easy use (batteries included).   E-Z Water Filler 12 oz The EZ Incubator Water Trough Filler makes the task of adding water accurately to any incubator a breeze. No more spilling water, overfilling, or guessing where your water will go.   Feeder & Waterer Kit The Incubator Warehouse feeder and waterer kit provides you with the essential supplies to feed and water your new birds after they hatch. Double-Tuf 1.5-quart poultry waterer Double-Tuf 1.5 lb. poultry feeder 1 - Pack of Waterer Stones- reflective color attracts birds 1 - Packet of poultry electrolyte 1 - Pack of high protein starter food - not included for shipments outside of US & Canada 1 - Set of feeding instructions for birds   InstaBrooder™ with Vrooder™ Heater Plate Incubator Warehouse Insta Brooder™ Pen with a Removable Mesh Top 2 Disposable Brooder Liners for Easy Cleanup. The Vrooder™, The Brooder Heater Plate with a View (Accommodates up to 30 baby chicks) The InstaBrooder™ with Vrooder™ is an Incubator Warehouse exclusive. Pops open and sets up in an instant. Can hold up to 30 Chicks. Mesh roof zips closed to keep the chickens in and predators out. Easy cord access in the bottom corner allows the Vrooder™ cord to run out and Velcro’s shut to keep chicks in. Disposable Liners make clean up a breeze. InstaBrooder™ folds up to smaller than a purse for easy storage. Insta Brooder Pen Dimensions: 36 X 36 X 18 in. Vrooder™ Dimensions: 14.5" x 14.5" x 12.5". Power Spec: 110V AC, 40 Watts. NOT INTENDED FOR USE OUTDOORS (Garage/Barn are ok if temperatures do not drop below 25 degrees Fahrenheit).   AquaTank™ Humidity Reservoir (Optional Selection) The answer to one of the common hassles with incubation is maintaining the humidity inside the incubator. With the AquaTank there is no need to frequently fill the water reservoirs or struggle to maintain the desired humidity. Simply determine which EZ-Fill port is right for your local area and then just insert the AquaTank into the correct port and forget about humidity management until the tank needs to be refilled.   As always, all of our products are covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the IncuView™ egg incubator Ultimate Combo Kit for yourself.  
Power Cord for GQF Cabinet $9.99
Replacement Power Cord for GQF Cabinet Incubators. Approx. 6 ft long
Power Switch for GQF Cabinet $14.99
Replacement Switch for GQF Cabinets.
Replacement Alarm for GQF Cabinet $15.00
Replacement Alarm for GQF Cabinets
Replacement Lid for 2370 (Styrofoam Only) $23.99
Styrofoam Lid for GQF 2370 Incubator. Styrofoam and windows ONLY, NO Electronics. Styrofoam may contain small imperfections and marks (see pictures for examples)
Replacement Lid for GQF 1588 Incubator ((No Electronics) $34.99
Replacement Lid for GQF 1588 Incubator. Styrofoam and WIndow ONLY. NO Electronics. Styrofoam may contain small imperfections and marks (see pictures for examples).
Replacement Sensor for HumidiKit (Apr. 2020- Current) $14.99
Replacement Sensor for HumidiKits purchased April 2020- Current.
Thermal Fuse for GQF Cabinet $14.99
Replacement Thermal Fuse for GQF Cabinet.
Thermostat for 2370 Incubator $54.99
Replacement Thermostat for 2370 Incubator.