HumidiKit™ - Auto Humidity System for Incubators

Rating:
94% of 100
$129.99
In stock
SKU
1264

Key Features

  • Automatic and accurate humidity control
  • Programmable digital hygrostat
  • Humidifier delivers instant humidity
  • Provides fresh air for eggs
  • 1 Liter capacity (distilled water recommended)
  • Typically only needs to be filled once a week (tabletop incubators)
  • Easy to install
  • Expandable tubing extends to 30"
  • Compatible with most incubators

One of the common hassles with incubation is maintaining the humidity inside the incubator. These hassles include the need to frequently fill the water reservoirs or not being able to maintain the desired humidity.

We are proud to introduce the HumidiKit automatic humidity system for egg incubators. This system is designed to instantly deliver accurate humidity to most incubators. The digital hygrostat that measures and controls the humidity is fully adjustable so you can achieve the humidity range that is right for your eggs. The humidifier is designed to gently provide instant humidity and fresh air directly inside the incubator for an accurate humidity range. The humidifier also comes with a one liter bottle which typically needs to be filled once a week for most desktop incubators. To extend the life of the humidifier we recommend using distilled water. This unit comes ready to install into your incubator; simply place the probes from the hygrostat inside the incubator, insert the hose into a vent hole, fill the water bottle, and connect to power.  The HumidiKit is also covered be the IncubatorWarehouse.com’s One-year No Hassle Guarantee so you can purchase with confidence.

 

Product Instructions: 

HumidiKit™

More Information
SKU 1264
Weight 2.8125
Condition New
Material Plastic
Model 1264
Voltage North America (110/120 Volt AC)
Capacity 1 Liter
Write Your Own Review
You're reviewing:HumidiKit™ - Auto Humidity System for Incubators
Your Rating
Customer Questions
What is the wattage of the HumidiKit?

The HumidiKit runs at roughly 30 watts.

Can you set the humidity range or do you set a specific humidity level you want and will it stay at that?

For the HumidiKit all you will have to do is set the desired humidity level and it will maintain that level for you with only minor variances. 

Would the HumidiKit work with a larger cabinet incubator?

We have tested the HumidiKit in cabinet size models that are approximatley the size of a GQF cabinet incubator and it works great. The dimensions of a GQF cabinet incubator are approximatley 32" H x 32" L x 17" W. It would most likely work in a cabinet...

Will this work with a Brinsea Ovation Advance? There does not appear to be a place to insert the hose or the sensor.

No, the HumidiKit will not work with the Brisea model incubators due to fitment issues.

Does it dehumidify the incubator if the humidity is too high?

It does not, the HumidiKit will only provide controlled humidity for your inubator.

What if it runs out of water on accident?

If the unit runs low on water it will simply stop running.

Will the HumidiKit™ work on the IncuView™ All-In-One Automatic Egg Incubator?

Yes! The HumidKit™ - Auto Humidity System for Incubators will work great with the IncuView™ All-In-One Automatic Egg Incubator. The HumidiKit™ also works well with any of the other incubators we have listed.

How do I lower the humidity in my incubator?

The best way to lower humidity in an incubator is to open the vent cap(s) and wait around an hour to see if the humidity stabilizes where you want it. If that does not lower it enough you can remove some of the water from your water troughs in the base...

What position should the on-off switch be in to turn the humidifier on, round circle down for on or the dash down? Which is on and off?

The power switch on the back of the humidifier typically has the dash as 'on' (dash down) and the circle as 'off' (circle down). However, we have received and sent out a few units with the switch attached backward. This does not affect the unit functions...

Where can I find parts for HumidiKit?

We do not sell individual parts for the HumidiKit on our website. If you do have any issues with your unit the customer service representative will work with you to find the best solution to fix the issue. You can contact with customer service through...

The Humidikit comes with a 1-L bottle, would using a 2-L pop bottle instead cause damage to the ultrasonic disk?

We do not recommend a bottle larger than one liter because it can cause a couple issues. One being that it can harm the ultrasonic disc. Another issue is the oversize water bottle cannot support itself and cause spillage. This water on the outside of...

Did you find what you were looking for?
We found other products you might like!
Copyright © 2009-present JP Ventures LLC & Incubator Warehouse. All rights reserved.