Search results for "help":

Riser for Nurture Right 360. Can be used to raise lid height for larger birds and also to help keep birds in incubator when lid is removed. Adds 1.5" of height to the incubator. NOT DISHWASHER SAFE

The two biggest factors that affect hatch rate are temperature and humidity. With these factors in mind, we created the IncuTherm™ series of digital thermometer/hygrometers. The IncuTherm™ is able to accurately measure and display the temperature and relative humidity at the same time and can be set to either Fahrenheit or Celsius. Its compact design allows the IncuTherm™ to be placed inside the incubator without taking up much space, but the LCD screen is still easily readable. The built-in high and low memory feature stores the highest and lowest temperature and humidity readings since the last memory reset, which helps you ensure ideal conditions for a successful hatch. The IncuTherm™ has been factory calibrated to +/- 1°F (0.5°C) precision, which is twice as accurate as most standard digital thermometers available on the market. This accuracy level makes the IncuTherm™ series the easy choice when selecting a digital thermometer for your next hatch. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the IncuTherm™ Digital Thermometer/Hygrometer for yourself.

The two biggest factors in achieving a successful hatch are correct temperature and humidity. With these factors in mind, we created the IncuTherm™ series digital thermometer/hygrometers. The IncuTherm Plus™ is able to accurately measure and display the temperature and relative humidity at the same time which can be displayed in both Fahrenheit or Celsius . The probe is placed inside the incubator. This allows the IncuTherm Plus™ to measure temperature and humidity on the inside of your incubator and display it on the outside. The built-in high and low memory stores the highest and lowest temperature and humidity readings since the last memory reset. This helps you ensure ideal conditions for a successful hatch. The IncuTherm Series has been factory calibrated to be accurate to within +/- 1°F (0.5°C) in the incubation temperature ranges. This is twice as accurate as most standard digital thermometers available on the market. This accuracy level makes the IncuTherm Series the easy choice when selecting a digital thermometer for your next hatch. As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the IncuTherm Plus™ Hatch Monitor for yourself.

One of the biggest factors in achieving a successful hatch is maintaining the correct temperature. Most thermometers measure the air temperature, which warms and cools faster than the egg temperature. With that factor in mind, we have created the Egg-O-Meter thermometer which measures the actual egg temperature. The Egg-O-Meter has a sensor that is embedded in a synthetic egg which closely reflects the temperature of a real egg. Temperature can be displayed in either Fahrenheit or Celsius. A 36 inch cord allows for the large LCD screen to be placed in a convenient location, and still measure the temperature anywhere in the incubator. The built-in high and low memory stores the highest and lowest temperature since the last memory reset. In addition, a programmable alarm warns if the eggs reach an undesirable temperature (Set in 1 degree increments). This helps you ensure ideal temperatures for a successful hatch. As always, all of our products are covered by our 2 Year IncuCare Warranty. Purchase today with no worries and experience the Egg-O-Meter egg thermometer for yourself.

The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  

These are realistic looking & feeling kiln-fired ceramic eggs. These eggs have the same look and feel of real eggs and similar weight to real eggs! The eggs are hollow and very durable. We have dropped them from 7 feet high onto linoleum without them breaking; a 200lb man stood on them and they did not crush. If dropped from high up onto cement they might break. Multi-purpose, see details below:Please note: the listing price is PER EGG. So you if you choose a quantity of one, you will get one egg. If you want three eggs, select a quantity of three. The photos show multiple eggs to show how they compare to each other. Nest EggsThey are used to seed the nest, in order to promote egg laying of lazy chickens and reduce floor laying. Also stops birds from pecking eggs and breaking them open. This trick has been used for generations among farmers worldwide.Craft EggsGreat for craft projects, painting, decorating, and gift baskets! When painting it is recommended that you thin the paints down before painting. It helps the paint to absorb into the egg better. Can be glazed and kiln fired.   White Chicken Egg = 2.25 inches tall  For larger orders (MULTIPLE DOZENS) contact us for bulk pricing

The LayLight is a super bright, high-efficiency, and high-output LED light for your chicken coop. This will provide the extra light your hens need to continue laying eggs into the Winter months. As daylight decreases, chickens naturally decrease the number of eggs they lay. To continue laying through the Winter months, they need a little extra light so their internal clock tells them to keep producing. The dispersing lens optimizes the light distribution to help light the entire coop up. Easy to mount so can place it and set it up quickly. Backed by our 2-Year IncuCare Warranty. Diameter: 2 3/8 inches   SEE OUR VIDEO: https://youtu.be/j4O_jExIrEE  

During incubation, eggs must be turned several times a day to prevent the yolk from settling and help exercise the embryo, but turning the eggs by hand can be very time-consuming. The Hova-Bator Automatic Egg Turner saves you time and hassle by automatically rotating the eggs 6 times per day. This model holds a total of 6 egg racks that can accommodate eggs of many sizes. The turner can hold up to 41 chicken, duck, or turkey eggs, or with quail egg racks installed, up to will 120 quail eggs. Additional accessories can be purchased for your incubator to improve your hatch rate and your overall experience, including Goose egg racks, an Egg-O-Meter thermometer, and an Incu-Bright egg candler.   This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Hova-Bator Automatic Egg Turner for yourself. International Customers This automatic egg turner uses 110 Volt AC Power. For international customers (220/240V), you must purchase an international power converter to maintain product warranty.

Brooder Heat Plates are wonderful but they can take some of the fun out of raising chicks by keeping them hidden and out of sight. We’ve put the enjoyment back into raising chicks with the introduction of the Vrooder™, The Brooder with a View. You won’t miss any of the action with the exclusive Vrooder™ viewing port. This port allows you not only to see and watch the cute birds but also to help keep them safe (birds can get stuck in the middle of a traditional brooder plate and suffocate). The Vrooder™ simulates a mother hen keeping her chicks warm and cozy under her feathers. Keeping a constant temperature, using an integrated thermostat and heater. Traditional heat lamps consume over 6 times as much electricity as the Vrooder™. With the electricity savings the Vrooder™ pays for itself in a matter of weeks. A traditional Red Bulb uses 250 Watts constantly vs only 40 watts intermittently (integrated thermostat turns heater on and off as needed) As your chicks grow, simply raise the heat plate with the easy-to-adjust thumbscrews without needing to remove the heat plate from your brooder. IP64 rating means it is built dust tight and water resistant. Cleanup is a breeze, simply wipe down with a wet rag without worrying about damaging the internal components. The Vrooder™ can safely accommodate up to 30 baby chicks. Power Specs: 110 volts and 40 watts. Heat Plate Dimensions: 14.5”L x 14.5”W x 1”H. Assembled Dimensions: 14.5”L x 14.5”W x 12.5”H.

The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.     

Did you know that at any given time, the temperature in your Hova-Bator still air incubator can vary by up to five degrees from top to bottom and from the center to the corners? This occurs primarily because heat rises. Unfortunately, this temperature variation can have a significant negative impact on your hatch rates. This problem can be significantly reduced by installing a circulated air fan kit into your incubator. This fan circulates the air, which helps keep your whole incubator the same temperature. This can have a positive impact on hatch results. The more consistent air temperature also ensures that your thermostat is cycling on and off at the appropriate times, not just when the air around the thermostat heats or cools. Putting a fan inside your incubator is a great way to increase hatch rates, but it is not just as simple as buying a PC fan or a cheap fan kit. There are a few things that you need to keep in mind: Too much air circulation is bad for eggs, as it will dry them out. Think about it this way: there isn’t a fan blowing on eggs in nature. The only reason that an incubator needs the fan is to keep the temperature more consistent (like in nature). Beware of cheap kits, which often use high-speed fans. Almost all fans on the market are designed for cooling things, so they are made to move as much air as possible. This is not what you want. If your fan is too powerful it can overheat your incubator. Fans generate heat, and alternate fans are known to cook eggs. The direction the air flows and the positioning of the fan inside your incubator is critical to maintaining a consistent temperature throughout the incubator. Our fan kit includes simple instructions on how to do this. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Hova-Bator Circulated Air Fan Kit for yourself. Video: Installation Video

GQF Box Brooders are designed to eliminate stress in young birds by providing plenty of heat, fresh air, light, feed and water space, and sanitary conditions for a confined area. Three clear plastic panels allow full and easy viewing of the brooder’s interior. Each brooder comes with three 28.5' troughs which maybe used for either feed or water. Ample feed and water space is necessary to allow weaker chicks access in the presence of more dominant chicks. Any trough may be equipped with optional automatic watering to provide the large quantity of water necessary. Failure to provide proper feed and water space can result in slower weight gain and perhaps higher chick mortality. The troughs are mounted on the outside of the brooder so that the chicks do not mix droppings into the food or water. The 300-watt heater provides sufficient heat while the vented plastic side panels keep out drafts. As chicks are drawn to light rather than heat, each heater has a socket for a low wattage attraction light bulb (2 bulbs included), which helps to hold the chicks in the heated area. Each brooder comes with an easy to use Digital Thermostat. The floor is a thin wire ½” mesh which will allow droppings to easily pass through. For small chicks like quail this floor requires that a layer of No 1628 DACB paper or paper towels be laid down on the wire for the first 4 to 7 days after which quail may stand on the ½” wire floor. Day old poultry and ducks can be placed directly on the wire. Drop pans are made of lightweight aluminum for long life. Drop pans can be easily pulled out even when brooders are stacked and the wire floor is heavy with birds. This box brooder is universal as each side panel comes with an adjustable gate to regulate openings for chick size. 32” X 38” X 12” Approx. capacity to 4th week - 100 quail - 50 Chukar or Pheasants. Poultry Chick capacity - 100 chicks through 2 weeks. Shipped in 2 cartons. (Needs #5001 Feeder & Waterer for game birds)  Brooders are designed to bring normal room temperature up to desired temperature.  Brooders do not have sufficient heat to offset a cold, unheated barn.  TUV LISTED - This certification makes it perfect for use in classroom and laboratory settings.

During incubation, eggs must be turned several times a day to prevent the yolk from settling and help exercise the embryo, but turning the eggs by hand can be very time-consuming. The Hova-Bator Automatic Egg Turner saves you time and hassle by automatically rotating the eggs 6 times per day. This model holds a total of 6 egg racks that can accommodate eggs of many sizes. The turner can hold up to 41 chicken, duck, or turkey eggs. Additional accessories can be purchased for your incubator to improve your hatch rate and your overall experience, including Goose egg racks, an Egg-O-Meter thermometer, and an Incu-Bright egg candler. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Hova-Bator Automatic Egg Turner for yourself. International Customers This automatic egg turner uses 110 Volt AC Power. For international customers (220/240V), you must purchase an international power converter to maintain product warranty.

Product Features Fast Shipping: Ships the next business day for quick delivery. Advanced Digital Command Center: Features the #3258 thermostat for precise temperature and humidity control.  Easily track your with the built-in hatch day counter. Large Egg Capacity: Holds up to 1368 quail eggs, 270 chicken eggs, or 36 larger eggs like goose or emu (trays sold separately). Multiple Racks: Includes three turning racks for efficient egg rotation. Hatching Tray Included: Comes with a plastic hatching tray without a cover for hassle-free incubation. Moisture Control: Equipped with a moisture pan and two wick pads to maintain optimal humidity. Durable Construction: High-strength plastic board for insulation, quiet operation, and easy cleaning. User-Friendly Design: LCD display, audio/visual alerts, and a transparent door for easy monitoring. Instruction Booklet Included: Comes with a detailed guide to help you get started and maximize performance. Two-Year Warranty: Backed by the Two-Year IncuCare Warranty for reliable performance. Product Description: The GQF 1502 Digital Sportsman Cabinet is a premium egg incubator and hatcher combo designed for both hobbyists and professionals. Featuring a state-of-the-art digital command center thermostat (#3258), this incubator provides precise control over temperature and humidity, displayed clearly on an LCD screen. An integrated onboard computer ensures real-time monitoring of internal systems and environmental conditions, offering unmatched accuracy and convenience for all your hatching needs. This all-in-one incubator includes three turning racks (plastic egg trays sold separately) for seamless egg rotation and a spacious hatching tray at the bottom, making it easy to manage staggered egg settings. The intelligent design allows you to set eggs on a rolling schedule, ensuring efficient use of the incubator space while maximizing hatching potential. A moisture pan with two wick pads and a detailed instruction booklet further simplifies operation, making it accessible for users of all experience levels. Hand-assembled with high-strength plastic board, the GQF 1502 is not only well-insulated but also quieter, durable, and easy to clean. The thermostat operates within a range of 60°F to 103°F, adapting to a variety of room temperatures. With its 110-120VAC power supply and 325-watt capacity, this unit is TUV-listed for reliability and safety. Its sleek, easy-view door and audio-visual alerts further enhance usability, while the robust two-year IncuCare Warranty ensures peace of mind. Egg Capacity: Quail Eggs: 1,368 (Assumes double stacking of egg trays) Pheasant Eggs: 354 Chicken Eggs: 270 Duck/Turkey Eggs: 198 Large Eggs (Goose, Peafowl, Emu): 36–45 Hatching Tray: Holds up to 72 medium-size eggs or 250 quail-size eggs at a time. Note: Plastic egg trays and metal setting trays (sold separately) are recommended for optimal use. Plastic trays are available in multiple sizes to accommodate quail, pheasant, chicken, or larger eggs. Dimensions: 30 1/4” Front to Back 15 3/4” Wide 31 3/4” High Perfect for poultry enthusiasts and small-scale breeders, the GQF 1502 Sportsman Incubator delivers unparalleled precision, durability, and ease of use, ensuring a smooth and successful hatching experience every time.

This is a Brand New Sammax style thermostat that works GREAT in an incubator! Included with purchase:    * Thermostat with a temperature range of 80-115 F (Long 1.5" shaft can go through thick styrofoam walls)    * Screw nut that screws onto the thermostat shaft to help attach to a surface or panel    * 15A rating    * Can be used with either AC or DC applications    * Comes with a wiring diagram for wiring in a fan and a heaterCaution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protecting screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!