Search results for "1":

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating, and storing eggs. At time of setting eggs, just remove loaded egg tray from storage area and place it on the incubator turning rack. The GQF No. 1500 and 1502 incubators are equipped with turning racks that will accomodate plastic trays to hold your eggs in place. Each No. 1502 turning rack will hold 4 quail egg trays (456 quail eggs). Molded posts on each tray permit double stacking for a total of 1368 quail eggs. (Caution: GQF HATCHING trays hold a maximum of 250 quail eggs). Outer edge positions of double stacked trays may not be used in top turning rack. SET OF 6 TRAYS. COLOR MAY VARY.

This is ONLY a rebuild kit for the Old Style AutoCoop Door Opener.  Purchase includes the white timer and the internal circuit board needed to completely rebuild your AutoCoop Door Opener Controller. Power supply not included.

6 Foot power cord for Little Giant Egg Incubators 9300, 10300, and Nurture Right 360 Incubator. Standard 2-Prong U.S. Design. High Quality Incubator Warehouse Replacement (NOT OEM). Color: Black For Nurture Right 360 Incubator users: This is the power cord ONLY, not the power supply. This is the cord that plugs into the power supply/brick.

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating, and storing eggs. At the time of setting eggs, just remove the loaded egg tray from the storage area and place it on the incubator turning rack. The GQF No. 1500 and 1502 incubators are equipped with turning racks that will accommodate plastic trays to hold your eggs in place. Holds extra large eggs (Turkey, Duck, Jumbo Chicken, etc.). Each of the GQF No. 1502 turning racks will hold 2 extra large egg trays (54 eggs) for a total of 162 eggs per incubator. One tray per setting rack must be trimmed to fit GQF incubators. SET OF 6 TRAYS. COLOR MAY VARY.

Replacement Hatching Tray Mat for IncuView XL

Did you know that at any given time, the temperature in your Hova-Bator still air incubator can vary by up to five degrees from top to bottom and from the center to the corners? This occurs primarily because heat rises. Unfortunately, this temperature variation can have a significant negative impact on your hatch rates. This problem can be significantly reduced by installing a circulated air fan kit into your incubator. This fan circulates the air, which helps keep your whole incubator the same temperature. This can have a positive impact on hatch results. The more consistent air temperature also ensures that your thermostat is cycling on and off at the appropriate times, not just when the air around the thermostat heats or cools. Putting a fan inside your incubator is a great way to increase hatch rates, but it is not just as simple as buying a PC fan or a cheap fan kit. There are a few things that you need to keep in mind: Too much air circulation is bad for eggs, as it will dry them out. Think about it this way: there isn’t a fan blowing on eggs in nature. The only reason that an incubator needs the fan is to keep the temperature more consistent (like in nature). Beware of cheap kits, which often use high-speed fans. Almost all fans on the market are designed for cooling things, so they are made to move as much air as possible. This is not what you want. If your fan is too powerful it can overheat your incubator. Fans generate heat, and alternate fans are known to cook eggs. The direction the air flows and the positioning of the fan inside your incubator is critical to maintaining a consistent temperature throughout the incubator. Our fan kit includes simple instructions on how to do this. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Hova-Bator Circulated Air Fan Kit for yourself. Video: Installation Video

Power supply for the KEBONNIXS incubator. 110V-240V AC power input 12V DC output. Compatible with models KDI－12 & KDI12

Replacement Thermostat for 2370 Incubator.

Set of 4 Replacement leg collars and thumbscrews for the Vrooder frame.

Mesh floor for Little Giant Incubator.

Hova-Bator must have been produced after August 2004 to accept this bottom half. May have slight discoloration or dings/dents.

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating and storing of eggs. At time of setting eggs, just remove loaded egg tray from storage area and place it on the incubator turning rack. The No. 1500 and 1502 incubators are equipped with turning racks that will accomodate plastic trays to hold your eggs in place. Each No. 1502 turning rack will hold 2 pheasant egg trays (118 pheasant eggs) for a total of 354 eggs per incubator. (Not Stackable in GQF incubators). SET OF 6 TRAYS. COLOR MAY VARY.

Did you know that at any given time, the temperature in your Little Giant still air incubator can vary by up to five degrees from top to bottom and from the center to the corners? This occurs primarily because heat rises. Unfortunately, this temperature variation can have a significant negative impact on your hatch rates. This problem can be significantly reduced by installing a circulated air fan kit into your incubator. This fan circulates the air, which helps keep your whole incubator the same temperature. This can have a positive impact on hatch results. The more consistent air temperature also ensures that your thermostat is cycling on and off at the appropriate times, not just when the air around the thermostat heats or cools. Putting a fan inside your incubator is a great way to increase hatch rates, but it is not just as simple as buying a PC fan or a cheap fan kit. There are a few things that you need to keep in mind: Too much air circulation is bad for eggs, as it will dry them out. Think about it this way: there isn’t a fan blowing on eggs in nature. The only reason that an incubator needs the fan is to keep the temperature more consistent (like in nature). Beware of cheap kits, which often use high-speed fans. Almost all fans on the market are designed for cooling things, so they are made to move as much air as possible. This is not what you want. If your fan is too powerful it can overheat your incubator. Fans generate heat, and alternate fans are known to cook eggs. The direction the air flows and the positioning of the fan inside your incubator is critical to maintaining a consistent temperature throughout the incubator. Our fan kit includes simple instructions on how to do this. Miller Manufacturing has stopped producing the 7200 fan kit, but this kit can take its place. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Little Giant Circulated Air Fan Kit for yourself. Video: Installation Video

Replacement Thermal Fuse for GQF Cabinet.

Genuine power supply for the IncuView and IncuKit Mini. 110V-240V AC power input 12V 5A DC output.