IncuTherm Plus™ Hatch Monitor

I wanted a hygrometer that had a probe that measures humidity and hangs inside the tanks, while the unit itself sits on the outside of the tanks. I have land hermit crabs and they need the air to be humid and warm at all times. They cannot breathe without humidity. I didn't want to use a gauge that was placed into the tank because the batteries corrode due to the humidity being moderate/high. (80-85) I was pleasantly surprised when I calibrated the gauges (3), all were at 77 degrees temperature, 2 were 77% humidity and the 3rd was 76% humidity after 24 hours of calibration. I posted pics and info about the gauges on our crab group and someone from the group was very interested in purchasing your product! I hope you get business from our group! (Land Hermit Crab Owners Society, Crab Street Journal) Thank You!!!!

I am new to incubating. I purchased two of these to use my incubators after having really poor hatch rates. Both read really close to each other, +/-1 degrees for temperature. Humidity were both really close, within +/-3% to each other. My hatch rates increased by a lot. From less than 25% to over 50% hatch rate with all my chicken and gamebird eggs. I now only use these to monitor my incubators. These are well worth the money if you have the foam incubators like I do. They seem expensive for their size, but they helped hatch over 100 quails by now, and hopefully they will continue to help hatch hundreds more.

Way more accurate than the Inkbird Unit I purchased from Amazon that Units Temp probe was over actual by 1.6F and Hygrometer was reading 5% under actual and the remote base read .4F under actual .

The IncuTherm is reading spot on for Temp can see unit cycle from 99.5f to 99.7f when heater unit is on Hygrometer is less than !% off actual.
Looking forward to Upgrading the Dual wafer control to the Incustat on my old 1202 Sportsman after this years hatch.

Super Accurate !! Great Price, Not A Better One In The Market !!

I purchased this thermometer as a means to verify the mercury bulb thermometer that came with my Hovabator incubator, as well as to monitor the humidity levels for a few days prior to setting my first batch of Buff Orpington eggs. There was a 1.5 degree discrepancy between the mercury thermometer and this digital unit as read at egg level. After verifying the temperature with a 3rd, medical grade thermometer, I found the Incutherm unit to be within .5 degrees of the medical unit. The memory feature on the Incutherm is a worthwhile function to have as my Hovabator is located in my unheated attached garage. It's nice to see the min/max temperature swings for a given period of time. I'm currently on day 12 of my hatch in which I originally set 36 Buff Orpington eggs. After candling on day 7, and again on day 11, I'm now down to 28 eggs, with all remaining eggs showing great development. I feel I can trust the Incutherm at this point which allows me to spend less time worrying about the temperature and humidity. Great price for a good product.