Search results for "Best":

Imagine a chicken waterer that could save you money and allow you to go longer between feedings, making it easier for you to get things done, leave town or go on vacation. Believe it or not, the Noble Nest™ Bucket Nipple Waterer does all of this and more! They even clean the coop for you! – (Just Kidding, but don’t you wish?) Chickens need clean and fresh water to live and produce those amazing eggs we all love. The Noble Nest™ Bucket Nipple Waterer is effective at keeping water clean and fresh. In addition, the sealed nipple design prevents leaking. Durable Plastic construction means years and years of dependable use. Noble Nest™ Bucket Nipple Waterer is available in multiple configurations to easily allow installation in any coop, run, or free-range layout. Holds an impressive 5 gallons of water. Why are you still reading? Start saving money, and time by buying the Noble Nest™ Bucket Nipple Waterer now. And remember It’s backed by the Incubator Warehouse IncuCare 2 Year Warranty, so you’ve got nothing to lose. Are you really still reading this? Ok, we’ll throw in some free instructions.   Noble Nest™ Waterer Configurations 5 Nipple, Side Waterer Designed to sit on the side of coop or where one side of the waterer is not accessible to birds, though it could also be used in other locations as well. 8 Nipple, 360° Waterer Designed for 360° access for birds, best used in location where birds can access all sides of waterer.

The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  

Product Features:   Precise Humidity Regulation: Automatically controls humidity for ideal conditions. Digital Programmable Hygrostat: Customizable settings for consistent performance. Instant Humidity Delivery: Ensures optimal air moisture levels immediately. Enhanced Air Circulation: Provides fresh, clean air for eggs. Convenient 1-Liter Capacity: Designed for distilled water; lasts up to a week in tabletop incubators. Effortless Installation: Quick and easy setup. Expandable Reach: Tubing extends up to 30 inches for versatile use. Broad Compatibility: Works seamlessly with most incubators. Trusted Durability: Backed by a two-year IncuCare Warranty.   Product Description:   Managing the right humidity in your incubator is crucial for successful egg hatching. The HumidiKit™ is an advanced automatic humidity control system specifically designed for egg incubators. Equipped with a programmable digital hygrostat, this system ensures accurate humidity control and allows you to adjust settings to achieve the perfect environment for your eggs, improving your hatch rates. With its 1-liter capacity, the HumidiKit™ delivers instant humidity while circulating fresh air inside the incubator, ensuring optimal conditions. In tabletop incubators, this system typically requires a weekly refill, making it a low-maintenance solution. Installation is easy and seamless with expandable tubing that connects to any ½” vent hole for flexible placement. The HumidiKit™ offers the perfect combination of convenience and precision, ensuring your eggs receive the best possible environment. Its automatic humidity control eliminates the need for constant monitoring, while the digital hygrostat makes it easy to set the ideal humidity levels. With weekly refills and easy installation, this system is a low-maintenance solution for anyone serious about egg incubation. 

Watering nipples are one of the best upgrades to a traditional chicken waterer. They're mess-free, so you'll spend far less time cleaning and scrubbing out poopy, dirty waterers, and more time enjoying your flock. Screw these nipples into the container of your choice (instructions provided), such as 5-gallon plastic buckets or a PVC pipe. What sets these apart from vertical nipples: they don't drip and, because no water is stored in the nipple unit even when your bucket or drinker is full of water, they won't freeze during the winter provided you're heating your water supply. Comes with the Incubator Warehouse 2 Year IncuCare Warranty. Installation requires a 3/8" drill bit. Don't have one? You can get yours HERE.

Many people prefer to build their own incubators. This is a fun do-it-yourself project. We’ve found that the biggest difficulty people run into while developing their incubators is finding a reliable heat source and thermostat. We’ve solved this problem by creating the IncuKit™ series thermostat fan heaters. We have created the IncuKit™ MINI to turn any small container into an incubator. This provides the heat, air circulation, and thermostat control you need to accurately control the environment in your container for hatching eggs. The IncuKit™ MINI has a proportional thermostat, built-in 60-watt heater, and fan. The proportional thermostat controls the amount of power that is supplied to the heater instead of simply turning the heater off and on. This provides more accurate temperature control than a standard off/on thermostat. The thermostat also comes preset to 99.5 degrees F which can be easily adjusted if necessary. The digital display makes it easy to read the current temperature and to make changes. The IncuKit™ MINI operates on low 12 Volt DC power and includes an AC-to-DC converter that works with both 110/120v and 220/240v power input. In case of power outages, the IncuKit™ MINI can also be powered with a 12V battery (additional battery connectors required). NOTE: You can optionally purchase the car power adapter or battery clips so you can keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. As always, all of our products are covered by our 2-Year IncuCare Warranty. Purchase today with no worries and experience the IncuKit™ MINI for yourself. How to determine the appropriate size container for the IncuKit MINI: There are several factors that determine how much power will be required to heat your container up to the appropriate temperature to hatch eggs. The size of the container, how well it is insulated, the room temperature, and how much the room temperature fluctuates will all have a significant impact. The best way to determine if the IncuKit™ MINI is the right size for your container is pretty simple. Just put a 60-watt light bulb in your container (ensure it is thermally insulated since they get pretty hot!) and measure how warm your container gets. If it easily gets to at least 100 degrees F, then the IncuKit™ MINI should work. It is the user’s responsibility to determine if this product will generate enough heat for your container.    

Product Features:  High-Quality Command Center or Thermostat: Choose between the 3258 Command Center (for models 1502, 1500, and 1550) or the 3248 Thermostat with Dial (exclusively for model 1202E). Wide Compatibility: Built for GQF Cabinet Models 1502, 1500, 1550, and 1202E, with model-specific variations to suit your needs. 2-Year IncuCare Warranty: Feel secure knowing your replacement part is backed by reliable warranty coverage. Product Description: Upgrade or replace the digital command center in your GQF cabinet incubator with ease using this high-quality replacement part. Specifically designed for GQF incubators, this replacement command center ensures seamless functionality and reliable performance. For Models 1502 and 1500 3258 Command Center: Direct replacement for all GQF digital command centers. Important: Must already have a 3258 Command Center installed. Not compatible with non-GQF cabinets. Note: The 3282 Sensor is not included (sold separately). For Model 1550 3258 Command Center: Fully replaces existing digital command centers. Wiring Difference Alert: The wires at the back are specific to the 1550 model and may differ from other models. Note: The 3282 Sensor is not included (sold separately). For Model 1202E Only 3248 Thermostat with Dial: A dependable analog solution designed exclusively for this model.   A Few Things to Remember 3282 Sensor: Not included with the purchase; order separately if required. Compatibility: These replacements are strictly for cabinets with existing digital command centers or thermostats. They will not work with incubators lacking command centers or non-GQF brands. Your Hassle-Free Replacement Solution Each command center or thermostat is designed for straightforward installation in compatible models. Keep your incubator running at peak efficiency with minimal downtime. Buy now and enjoy hassle-free installation, unique functionality, and great support with a 2-year IncuCare warranty. Don’t let downtime delay your hatching success. Keep your incubator ready to perform at its best every time.  

Imagine a chicken feeder that could save you money, prevent feed from molding, reduce waste, allow you to go longer between feedings, and make it easier for you to leave town or go on vacation. Believe it or not, the Noble Nest Bucket Port Feeders do all of this and more! They even clean the coop for you! – (Just Kidding, but don’t you wish?) Chickens naturally “scratch” for their food-digging, spreading, and hunting for the best bugs and seeds to eat. This works well in nature, but when you have to worry about food cost, spoilage, or lasting long enough for you to go on that awesome vacation (or just to visit your family), you just can’t afford to have your birds spreading the food all over. This is where the idea of the Port feeders was born. Now there are multiple commercial options for sale, and of course you can still make your own DIY PVC option, but none of them are both simple and effective. The PVC options work well, but if you’ve ever tried to make one you know they end up being expensive and require a lot of custom cutting and fabrication to make them work right. The other commercial options look right, but they fail to stop the birds from wasting their feed (just read the 1-star reviews and you’ll see). This is where the Noble Nest Bucket Port Feeder comes in. They are effective at minimizing food waste. In addition, the silicone gasket and curved design make them Weatherproof and able to handle anything Mother Nature can throw (or really drop) on them. Durable Plastic means years and years of dependable use. The Noble Nest Bucket Port Feeder is available in multiple configurations to easily allow installation in any coop, run, or free-range layout. Holds 20-30 pounds of feed (depending on feed type). Why are you still reading? Start saving money, food, and time by buying the Noble Nest Bucket Port Feeder now. And remember It’s backed by the Incubator Warehouse IncuCare 2 Year Warranty, so you’ve got nothing to lose. Are you really still reading this? Ok, we’ll throw in some free instructions.

Product Features:  Wide Compatibility: Fits GQF Incubator Models: 1502, 1500, 1550, 1202E, 1402, 1400, and 1450. Exact Fit: Matches GQF's specifications for hassle-free installation. Durable Build: Made with high-quality materials to ensure reliable and long-lasting use. Generous Length: Approximately 6 feet long for flexible placement and easy connectivity. Hassle-Free Replacement: Easy to install and ensures consistent power supply. Product Description: Say goodbye to power interruptions with this high-quality replacement power cord, expertly designed for GQF cabinet incubators. This power cord fits perfectly with models 1502, 1500, 1550, 1202E, 1402, 1400, 1450, and 1202. Whether you're upgrading or replacing an old cord, this 6-foot durable power cord ensures your incubator performs at its best without compromise. Pro Tips for Use: Ensure your incubator model is compatible with this power cord for the best fit and performance. Routinely inspect the cord for signs of wear or damage to maintain safety and efficiency. Organize cables to prevent unnecessary tension and maximize their lifespan. Make the Smart Choice Today Don't let a faulty power cord disrupt the critical process of incubation. This replacement power cord is built to match the original in terms of fit and performance, ensuring your GQF incubator operates as designed. It's the perfect blend of quality, functionality, and convenience.  

This Egg Turner Motor is perfect for cabinet egg incubator applications, providing very high torque (60 lbs/in) it can easily turn a variety of egg turner designs. The motor is 1 RPM (makes 1 revolution per minute), so it is best used with a timer to prevent overturning your eggs. This motor works great with the IncuKit XL Advanced because they have built-in egg turner timer controls.  The motor shaft has a D shape and also a hole through the shaft for easy egg turner linkage.  110V AC Power.

220 Volt International Version. Click here to see the 110V North America Version. The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom-built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! IncuStat Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater and fan. This comes pre-set to 99.5 degrees F. Select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers, this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. To determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC-powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125-watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together, and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.