Products

Drop Pan for Quail breeding pens, intended to be used with GQF No. 0316 Battery Pen Stand. Captures quail droppings to protect lower quail (when used with stand) and provide easier clean up. Drop Pans should be used beneath each pen in the Battery Stand, one pan per pen. These are intended to be purchased as needed and not included with the individual GQF No. 0303 pen. This item is over-sized and has a minimum shipping weight of 30 lbs. Dimensions: 26” X 31”

Drop Pan for Quail breeding pens, intended to be used with GQF No. 0316 Battery Pen Stand. Captures quail droppings to protect lower quail (when used with stand) and provide easier clean up. Drop Pans should be used beneath each pen in the Battery Stand, one pan per pen. These are intended to be purchased as needed and not included with the individual GQF No. 0303 pen. This item is over-sized and has a minimum shipping weight of 30 lbs. Includes 5 Drop Pans. Dimensions: 26” X 31”

Contains 6 blue bulbs. A low wattage light should be used to attract the baby chicks to the heating element, feed, and water. Red lights were used for years and are still preferred by some breeders. Blue lights have been the most popular in recent years.

For use in GQF No. 0427 Brooder. Fits through 1” hole. Length can adjust from 6” to 9”. To keep chicks healthy and prevent loss, set brooder temperature to 100°F and lower temperature 5°F each week to wean chicks off of needing supplemental heat.

This brooder makes it easy to monitor chick conditions at a glance and to raise large numbers of birds in limited floor space. GQF battery brooders with clear panels are ideal for displaying all types of chicks in feed stores. Lightweight materials mean lower shipping costs as well as easy handling of drop pans. A sturdy base with rugged casters and securely fastened brooders result in a solid stack which is portable even when full of birds. Only 65” high, all five tiers of brooders are accessible and drop pans and floors can be removed for cleaning while the brooders are stacked. Brooders are designed to bring normal room temperature up to desired temperature. Brooders do not have sufficient heat to offset a cold, unheated barn. Includes 6 plug electrical outlet strip with 4 ft. cord. 110 Volt. Combined wattage: 1500W. Lids provided for all brooders. 10 attraction light bulbs included. TUV LISTED - This certification makes it perfect for use in classroom and laboratory settings. Overall Dimensions: 32” Wide, 38” Front to Back, and 65” high

Trough hangs on poultry panels for feed and water. 28 ½” in length.

Drop Pan for box brooder. Dimensions: 36” x 30”

Same as the popular GQF poultry brooder, but without heating elements and thermostat. Has sliding clear plastic door panels on front and sides along with metal top panels and drop pan.

Includes one brooder, two expanded grow off pens, brooder base, and casters. Brooder fits approximately 48 day-old chicks, and each grow off pen can hold 24 older chicks. To maximize use, put day-old chicks in brooder for warmth, feed, and water. After four weeks, rotate chicks to grow off pens and put new chicks in brooder. Height: 49” https://www.youtube.com/watch?v=gWXptRoqURM&ab_channel=GQFManufacturing

Five Grow Off Pens make up the Battery. Includes base and swivel casters. When used in a battery, only one set of lids is supplied. The Grow Off and Holding pens are stacked and bolted together on a brooder base, which has ball bearing swivel casters for easy moving of the battery. (Same as Poultry Battery Brooder but without the expense of heating elements and thermostats.) Overall Dimensions: 38'' Wide, 42'' front to back, and 65'' high

Set of 4 heat element clips

Plastic grid floor for current production Hova-Bators. Replaces wire floor. 15.12" x 15.12"

Frame for Hova-Bator turner only. Racks and motor not included.

Replacement heater and fan assembly for GQF 1588 Genesis Hova-Bator only.

This thermometer is included with all wafer thermostat Hova-Bator incubators produced after 2001 but may be used with any incubator. This lightweight thermometer is intended to be placed directly on top of the eggs so that it reads the temperature at egg level. Dimensions: 6.5'' X 3.5''

Our continuous element style of 21″ heat tape is superior to the “panel” version as it offers more even heat distribution and can be cut to almost any length. It can be cut to the length required.  Great for Reptile Heat Mat and Seed Starting. Will be sent as continuous length. Does NOT include wire/clip/insulator set. 30 watts per foot. Lengths of more than 25'  are not recommended.

Most of our products use 110V AC power, but we sell of lots of incubators internationally, and other countries use 220/240V AC power, so we've created a converter kit. It provides everything you need to power ONE Little Giant OR HovaBator Egg Incubator Combo Kit (Incubator, Fan Kit, and Egg Turner) internationally. This power converter kit is specially designed for continuous use (most power converters will wear out under constant use). Converts 220/240V AC power to 110V AC power, UP TO 100 Watts. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the 220/240V Voltage Converter Kit for yourself.

This listing is for brand new 225 watt replacement heater coil for cabinet style egg incubators. Wire heats and cools quickly, minimizing overheating, making this an ideal choice for larger egg incubators 225 watts of power Voltage requirement: 110/120VAC Click here to see the 220V International Version. This is a substitute for GQF Part # 3014 - 225 watt coil heater in cabinet style incubators

Power supply transformer for 1588, 2362M, 1586, and 2365 110/12 Volt Hova-Bators.

Replacement 3- Prong Power Cord for Rcom Incubators and Brooders. Approx. 6 ft long.

3/8" drill bit for poultry water nipple installation. Color may vary.

Cabinet model fan assembly for older cabinet model incubators. Includes motor, fan blade and mounting bracket.

For incubators and brooders. Indicates when heat is on. 110 volt. Fits 1/2'' hole.  Direct Replacement for HovaBator 1602N

Roller Switch for Drive Motor for cabinet incubator

Swing Arm with Cam; replacement part for GQF 1500 Series Cabinet Incubators 

Valve/Float Assembly for cabinet incubator. Compatible with GQF 3030 Water Reserve System.

Connects turner assembly to turning trays in Professional models produced after 2007. Use GQF #3041 in Sportsman models.

Connects turner assembly to turning trays in Sportsman models produced after 2007. Use #3040 in professional models.

Vertical back support for cabinet incubators

Horizontal Support Bar for cabinet incubators

Set of four hinges for cabinet incubator doors.  Direct replacement for GQF Cabinet Incubators  

Cover for GQF item No. 3066, Hatching Tray for cabinet model incubators.

Aluminum wall heater with two fans for current style cabinet incubators. This is a direct replacement for any GQF 1500 series (1502, 1500, 1550) cabinet incubator. It also converts either of the two older DC fan versions to the current fan/heater model. Instructions included.

Upgrade your wafer thermostat or replace an old electronic thermostat with this Multi-Turn thermostat. This unit offers more accurate adjustment of temperature over single turn thermostats, as one complete revolution changes temperature only 1.7°F. 110 Volts, 400 Watts maximum. This thermostat is the recommended replacement for non-preset electronic thermostat models and wafer thermostat models. Electronic Thermostats are guaranteed for use in GQF Cabinet incubators only. Replaces PN 3140

Replacement inside sensor assembly for GQF 1500 series incubators with factory installed 3258 Digital Command Center. The date stamped on the back of the thermostat must be prior to 2016 to be compatible with this sensor.

Replacement inside sensor assembly for GQF 1500 series incubators with factory installed 3258 Digital Command Center. The date stamped on the back of the thermostat must be AFTER 2016 to be compatible with this sensor.

4" Butterfly Vent for Cabinet Incubator (5" total diameter). Metal.

Clamps used to secure 5/16'' tubing and fittings. Package of 18