Incubator Accessories

The IncuKit XL Extension allows the user to extend their fans that are attached to either the IncuStat basic or advanced IncuStat. This cord provides further flexibility for mounting and placing of either IncuStats or the Fan Heater unit reducing hassle.

The Plug ‘n Play is a digital electronic thermostat with remote sensor designed specifically for incubators. It's great for both tabletop and cabinet incubators. It comes pre-wired and ready to use. You can use any heating element up to 225 Watts. Simply plug in your heater, heat mat, or light bulb to the 3 outlet plug outlet and you’re ready to go. The temperature can be adjusted in 0.1 degree increments. Just press the up or down arrow to set it. The screen has a flame icon that turns on when the heater is operating. This unit comes with a 24 inch remote sensor that can be placed inside your incubator. The white thermostat may be mounted on the outside of the incubator. Comes preset to 99.5 degrees F (37.5 in Celsius mode). Set point can be adjusted to any temperature between 41-113 degrees F If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc. The digital readout displays temperature to the tenth of a degree (98.7, 99.4) The temperature switching differential is 0.2 degrees F. This means that if the temperature is set to 99.5 then the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7 110V AC Calibration enabled. This means that you can calibrate the thermostat if required. For example, if you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds) Note: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the amount of heat your heating element holds and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the eggs to heat or cool more than it should. As long as the up and down cycle is relatively small, less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine! This is true with any incubator and egg configuration. As always, all of our products are covered by our 2 Year IncuCare Warranty. Purchase today with no worries and experience the Plug ‘n Play Digital Electronic Thermostat for yourself.

Product Features: Heater with Two Fans: Designed for optimal airflow and consistent temperature regulation. Enhanced Compatibility: Specifically designed for GQF 1500 series models, including 1502, 1500, and 1550 cabinet incubators. Versatile Upgrade: Converts older DC fan versions to the modern fan/heater assembly. Reliable Durability: Aluminum construction ensures long-lasting performance. 2-Year IncuCare Warranty: Shop confidently with extended protection for your investment. Product Description: The GQF 3169 - 2 Fan Heater Assembly is a high-performance aluminum wall heater engineered for seamless compatibility with GQF 1500 Series cabinet incubators, including models 1502, 1500, and 1550. It is equipped with dual fans, ensuring optimal air circulation and consistent heat distribution for your incubation needs. This heater assembly is not only a direct replacement for existing systems but also allows for easy conversion of older DC fan versions to the modern fan/heater model. With straightforward instructions included, installation is simple and hassle-free. Don’t settle for inconsistent temperatures or outdated equipment. Order the 3169 - 2 Fan Heater Assembly now to experience the difference of a high-quality heating solution that exceeds your expectations.   

This fan is specially designed for small to mid size incubators.  This Gentle Flow fan is perfect for keeping a uniform temperature and not drying out eggs.  This fan is made with durable ball bearings for long life. Mounting holes on each corner make mounting in your incubator very easy. Just wire into your incubator so the fan is ALWAYS on to keep your small to mid size incubator temperature uniform. 110V AC

IncuKit Heating Wafer

The car power adapter allows you to keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. Works for IncuView & IncuKit Mini (DOES NOT WORK WITH GENESIS 1588)). Requires up to 5 Amps at 12V DC

Replacement Bottom for IncuView Incubator

Turning Tray for IncuView Incubator

This kit includes all the metal parts to assemble an entire cabinet turner assembly (3 Shelf) for a DIY incubator OR replacement for GQF cabinets (1500, 1502, or 1202E). TURNER MOTOR NOT INCLUDED (Sold Separately - SKU 3175 - Turner Motor Assembly). This turner fits egg racks 1243 (Quail), 1245 (Pheasant), 1246 (Chicken), 1248 (Goose/Turkey), & 1454 (Ostrich/Emu). Screws/ Bolts to attach to cabinet incubator walls NOT included, but all hardware to attach pieces together is included.

Setting Tray Rack for 1502 Cabinet Incubator. 24.5”

Complete lid for GQF 1588 incubators. Includes heater, fan assembly, and digital thermostat with LCD display. Does not include Hova-Bator bottom, liner, or power supply. Will work with previous model 1588 power supplies.