AccuHatch Pro™ Cabinet Incubator & Hatcher

Very unhappy with this purchase that has required over 6 months of temp monitoring to prove I want my money back.

I love this cabinet incubator. There are a few things that I think would help
1. Hinged door
2. More accurate Temp and humidity gauge
3. Maybe a bigger window in the door

But all around I really like it. I would recommend this incubator to anyone that hatches a lot of eggs. I incubate Call Ducks and so so good. I believe that it can hold 300 Call Duck eggs. As you see I 3D printed post it note holders an attached with 2 way tape to keep records of my eggs also added a light that is magnetic, 2 way taped a big washer for it to attach.

So far I love this product. The construction is great. Setup was easy. My first hatch went great. We did quail and got 100% of the fertile eggs. Now my 2nd hatch is underway and we've got tons of chicks popping out. I've attached a picture of our hatch underway.
Things I really like about this incubator: Everything is plastic so it's easy to clean, It Looks Great, Everything is included (egg turners, hatching trays, water refill bucket, hatching liners - to get all that in a GQF incubator you'd be in well over $1K.), So far it's been reliable, well built, The thermostat is very good and intuitive.
Things I think could be improved: Temperature is only in Celsius (not a big deal, just need to know that 99.5 F is 37.5 C and you are good to go,

The humidity is way lower than the digital read out says. The temp varies a lot from top tray to bottom tray. Very un happy

AccuHatch Pro is very cumbersome to operate, spend the extra and buy a 1502 Sportsman. Things I do not like about the unit: the door to incubator does not have hinges, so the door has to be taken completely off to load or unload eggs. The unit has 5 trays which are long plastic rods that the eggs lay on, these roller rods can bounce out if you are not careful, Each tray has a wire to it to operate the turning, so you have to plug and unplug every time you take tray out or rotate, trays need to be rotated every 5-6 days so that the eggs incubate evenly per AccuPro manual instructions. In addition the hatch can not be split up with different hatch dates you have to set all eggs at one time for one hatch date. Also the eggs lay flat, I prefer to set them up right like the sportsman 1502. In addition at lock down you have take all the trays out and insert lock down trays with are only about 3-4 inches high with a covers that did not seem to fit well for me and I had chicks jump out of the lock down tray, luckily they did not fall in the water source box at the bottom of the unit, or they would have drowned. If I had known operating this unit would be so difficult I would have never purchased. The best thing about my purchase was Incubator Warehouse they are excellent to deal with. I had a very poor first hatch, 20/150 eggs and it turned out the incubator was defective. I was very disgusted in the loss of hundreds of dollars of potential chicks that I needed to fill orders, scheduled to ship to my customer. Orders had to be delayed and it cost me additional to keep my customers happy. The good news, Incubator Warehouse did a terrific job resolving this issue, I definitely will buy from them again, but not AccuHatch Pro! Their customer service is superb at handling any issues you may have!

The control panel is hard to use and settings don't update the best. Eggs bunch up on the end with the rollers. Put 91 eggs in and got zero to hatch. Humidity is way higher than what it is set to and won't let me adjust it down without resetting everything. Can't figure out after that how to fix the day count. The door doesn't hinge - if you don't know, it comes all the way off every time.
It was fairly easy to assemble. It seems to maintain heat, but I have secondary thermometer and humidity sensor in their.
It arrived quickly, which was the only reason I purchased it, but after a 2,000 mile round trip and zero eggs hatched from my specialty breed I am very bummed with this incubator. Have started a second batch of random farm mix eggs to see, but again.. not super pleased with it so far.

It’s does not regulate tempature right and it ruined close to 300 eggs it was set at 99.5 and it was running 103 to 104 after checking it with the ThermoPro we found out why nothing was developing going to contact customer service tommorow to see what we can figure out

I’ve had issues with this since the beginning. Temperature will not regulate. Set at 100 and was going to 105 on top while the bottom was lower than 100. Calibration did not resolve the issue. Was told the fan was the issue. They shipped a fan and I replaced it. Issue wasn’t resolved. Was told to do factory reset and calibrate which I tried. Temp was still 103 on top. Tries to recalibrate again and now it will not get above 84 degrees. Asked for a refund and they send only a shipping label. Want you to try to find a box to send it in. Plus keep at the dimensions on the shipping label or extra shipping will be deducted from your refund. This was also stated “Once we receive the unit, we’ll carefully assess it based on the concerns you mentioned and process your refund accordingly.” So even when I send it back no guarantee I will receive a full refund. I’m already out $100’s in hatching eggs. Very dissatisfied. Also after researching online I’m not the only one that’s had issues with this incubator

Everything ok so far. on the 20th day. It's been so humid I haven't even had to use any water in the humidity container. added a bit to bring it up to 60% for the remaining 3 days. WE WILL SEE IN A FEW DAYS

Exactly what I was looking for on a incubator, it's set up to be able to stagger hatches where you can pull each individual tray out and slide a hatching basket into place. It comes with hatching mats for the baskets and basket covers to keep the chicks from falling out. I've compared temps on each individual tray and the temp is within .5° of what the incubator is set at and the humidity is within 2points of what it is set for. You can't ask for anything better than that! Very pleased with this unit so far.

We are very pleased with this new incubator which is giving us around 75% hatch rate!

I bought this incubator because I was losing eggs to not ha ingredients enough room in my many smaller incubators to fit all my eggs within the time frame needed. So far we have loaded it down once with way more eggs than we could ever fit in all of our smaller ones, and have a really good growing rate. Eggs are due to hatch in a week!

Excellent system that does it all.
Already hatching 300+ Quail, and looking forward to hatching another 400 eggs within next 3 weeks.