Search results for "all in 1":

This is a great all-in-one unit for those looking for a cabinet incubator.  It comes with everything you need: an incubator, hatcher, automatic universal egg turners, circulating fan, tray liners, humidity control, extra water reservoir!  And all of this in a durable double-walled unit that will last for years. 

Replacement heater and thermostat for GQF Box Brooders. 110 Volts

  Incubator Warehouse's Digital Electronic Egg Incubator Thermostat for IncuKit XL Description: This thermostat is very simple to use. Just press the up arrow to set the temperature (in 0.1 degree increments). There is a flame indicator on the screen that shows when the heater is operating. The unit has an 18 inch remote sensor that is placed inside the incubator. The white thermostat case is then mounted on the outside of the incubator. Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) 110V AC Power Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7. NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should. As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine! This is true with any incubator and egg configuration. Calibration Enabled. This means that you can calibrate the thermostat to a specific temperature. For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds).  

Perfect for kit for anyone incubating reptiles. This kit has been designed to help all of our customers incubating reptile eggs get started. The 1602N is a perfect fit for anyone wanting to incubate reptile eggs. Invented by G.Q.F. Manufacturing Co. over 30 years ago, the Hova-Bator is still the WORLD'S BEST SMALL INCUBATOR and the THERMAL AIR FLOW MODEL, is the most economical incubator available. The radiant heat tube gently warms the inside of the incubator, the air and eggs. Thermal action of the heated air flowing out of the exhaust vents in the top of the incubator, draws fresh air in through the bottom vent. This design includes two small windows on top for viewing. The wafer thermostat is proven, accurate technology that produces great hatch results.

The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.     

For use in all Box Brooders. Fits through 1 ⅛” hole. Measures from 50°F to 120°F.

Brass, heavy-duty thermostat wafer. 3'' diameter. Temperature range: 70-110°F. Accuracy to approximately 1/2°F +/-. Universal; has threaded stud with nut.

If you’re looking for a reliable yet affordable incubator, look no further. The Hovabator 1602N is a simple, easy-to-use incubator that is relatively low-cost. All these things combined have made this incubator a bestseller. The HovaBator 1602N is the perfect incubator for anyone new to hatching eggs or who wants to save money while still getting the maximum performance out of their incubator. Features: Thermal Air Flow: The 25 watt heat tube gently warms the air inside the incubator, which flows out of the exhaust vents in the top and draws in fresh air through the bottom vent Removable plastic hatching liner that makes after hatch clean-up a breeze Durable styrofoam makes the incubator last longer and retain heat better Two 4x6 inch windows for easy viewing High sidewalls to keep birds inside when the lid is removed Reliable and simple to use wafer thermostat Holds approximately 50 chicken/duck size eggs or 130 quail size eggs without an automatic egg turner Additional accessories can be purchased to improve your hatch rate and your overall experience, including an automatic egg turner, a forced air fan kit, an IncuTherm Plus Thermometer/Hygrometer, and an Incu-Bright egg candler. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Hova-Bator 1602N incubator for yourself. International Customers This incubator uses 110 Volt AC Power. For international customers (220/240V) you must purchase the IncubatorWarehouse.com international power converter to maintain product warranty.

Replacement humidity wick pads for cabinet model moisture pan. Wick pads are used to raise humidity during hatch period or during setting in arid or high altitude environments. 10 Wick Pads Per Pack

12V Hova-Bator with picture window

Harris Farms® Nurture Right 360 Incubator The Harris Farms® Nurture Right 360 Incubator features built-in LED egg candler. It has a rolling egg turner that simulates hen hatch for higher hatch rates, while an Auto-Stop feature stops turning eggs three days before they hatch. The 360 Airflow induced airflow technology ensures optimal temperatures.Features: Built-in LED egg candler Rolling egg turner simulates hen hatch for higher hatch rates Auto-Stop stops turning eggs three days before they hatch Induced airflow technology for optimal temperatures Includes a humidity sensor/reader Incubator Warehouse Hatching Guide Book - Intro to Hatching This is a printed version of our 4 Part of our Intro to Hatching YouTube Series (see video links below) Illustrated Guide to Hatching Basic introduction to incubating eggs and brooding chicks Product has references to our products but is overall very educational and informational 28 Pages YouTube Video Series Intro to Hatching Part 1/4: Setup https://www.youtube.com/watch?v=MqnbL8qTvaI&t Intro to Hatching Part 2/4: Incubation Period https://www.youtube.com/watch?v=vq8NvC2mH0U&t Intro to Hatching Part 3/4: Hatching Period https://www.youtube.com/watch?v=e3JzvNvvRpU&t Intro to Hatching Part 4/4: After Hatch https://www.youtube.com/watch?v=L7gtp3QQWgY&t Incubator Warehouse EZ-Clean Chick Brush for Cleaning Incubators & Eggs Cute Chick Brush for cleaning incubator or Eggs. 3 in x 4 in Incubator Warehouse IncuBright Egg Candler One of the most exciting parts of incubating eggs is being able to watch the embryo progress during the various development stages. The Incu-Bright™ egg candler makes this joy possible by providing an easy and effective way to candle your eggs. It was designed specifically for candling eggs while keeping affordability in mind. The IncuBright uses the latest in LED light technology. One super bright CREE bulb illuminates your eggs for easy viewing, even with dark or large eggs. The Incu-Bright™ has the only universal silicone rubber egg protector ring that lets you candle any size egg. The IncuBright™ is cordless, making it easy use. Batteries are included. EZ Incubator Water Trough Filler The EZ Incubator Water Trough Filler makes the task of adding water accurately to any incubator a breeze. No more spilling water, overfilling, or guessing where your water will go. Poultry/Bird Feeder & Waterer Kit The Incubator Warehouse feeder and waterer kit provides you with the essential supplies to feed and water your new birds after they hatch: 1- Double-Tuf 1.5 quart poultry waterer 1- Double-Tuf 1.5 lb. poultry feeder 1 - Pack of waterer stones - reflective color attracts birds 1 - Packet of poultry electrolyte 1 - Pack of high protein starter food - not included for shipments outside of US & Canada 1 - Set of feeding instructions for birds Two Year IncuCare Warranty Incubator Warehouse Insta Brooder™ with Vrooder™ Heater Plate The New Incubator Warehouse Exclusive Insta Brooder Pen is here and answers all your needs for a durable bird brooder! Fully enclosable with a removable mesh top ensures as your birds grow you can keep the top closed to ensure they do not escape and stay safe in their pen. The mesh roof ensures you never lose sight of them and can see everything happening in the brooder pen. A Velcro section in one bottom corner allows the Vrooder™ Brooder Heater Plate power cord to run out of the pen and keeps your birds from getting out. The Vrooder™ simulates a mother hen keeping her chicks warm and cozy under her feathers. Keeping a constant temperature, using an integrated thermostat and heater the Vrooder can accommodate up to 30 chicks. As your chicks grow, simply raise the heat plate with the easy-to-adjust thumbscrews without needing to remove the heat plate from your brooder. Comes with 2 disposable liners made to fit inside the unit and is textured to provide firm footing for your newly hatched chicks. These disposable drop pan paper board liners catch all your bird dropping and allow you to remove when the floor gets too dirty and covered in droppings. Made from a durable material the Insta Brooder pen can be washed off in the yard to remove any remaining dropping residue after your birds have been moved to their coop/cage. Please allow proper amount of time for the pen to dry before packing up to avoid mildew and mold growth and damage to your Insta Brooder pen. Once dry simply collapse and fold up and slide into its storage bag until your next hatch. Insta Brooder Pen Dimensions: 36 X 36 X 18 in. Vrooder Dimensions: 14.5" x 14.5" x 12.5", Accommodates up to 30 baby chicks, Power Spec: 110V AC, 40 Watts. NOT INTENDED FOR USE OUTDOORS (Garage/Barn are ok if temperatures do not drop below 25 degrees Fahrenheit) Incubator Warehouse's 2 year IncuCare Warranty

This fan is specially designed for small to mid size incubators.  This Gentle Flow fan is perfect for keeping a uniform temperature and not drying out eggs.  This fan is made with durable ball bearings for long life. Mounting holes on each corner make mounting in your incubator very easy. Just wire into your incubator so the fan is ALWAYS on to keep your small to mid size incubator temperature uniform. 110V AC

Individual holes minimize waste. Top slides off for easy access and cleaning. Made of heavy gauge galvanized steel and feature rolled edges for safety.

Complete lid for GQF 1588 incubators. Includes heater, fan assembly, and digital thermostat with LCD display. Does not include Hova-Bator bottom, liner, or power supply. Will work with previous model 1588 power supplies.

HovaBator 1602N Egg Incubator with Fan (Model 1091) If you’re looking for a reliable yet affordable incubator, look no further. The HovaBator 1602N is a simple, easy-to-use incubator that is relatively low-cost. All these things combined have made this incubator a bestseller. The HovaBator 1602N is the perfect incubator for anyone new to hatching eggs or who wants to save money while still getting the maximum performance out of their incubator. Features: Incubator Warehouse Gentle Flow Fan kit Reliable wafer snap thermostat for accurate temperature control Washable plastic sanitary liner for easy cleaning Styrofoam construction provides excellent insulation Removable water trough for humidity control Two viewing windows to watch eggs as they hatch IncuTurn™ Automatic Egg Turner for HovaBator Egg Incubators Carefully engineered and tested the universal egg tray holds any size egg, saving you from purchasing expensive egg racks for different egg sizes. Eggs are gently rolled six times per day, similar to how they are turned in nature, preventing the yolk from settling and exercising the embryo. The universal egg tray can hold 42 Chicken, 70 Quail, or 28 Goose eggs. Installation is a breeze, simply slide the motor clip over the edge of the incubator and attach the turning tray and you’re ready to start incubating. This product is a direct replacement for all HovaBator Egg Turners. Guaranteed to outperform the HovaBator Egg Turners*. This is a 110V version, purchase the voltage converter for 220/240V use.   Quail Tray for IncuTurn™ (Optional Selection) The Quail egg tray holds quail and small bird eggs and increases egg capacity to 116 quail eggs versus the 70 quail eggs that the universal tray can hold.   Incubator Warehouse Hatch Guidebook This illustrated 28-page book is the printed version of our 4-Part Intro to Hatching YouTube Series (see video links below). It gives a basic introduction to incubating eggs and brooding chicks.   YouTube Video Series Intro to Hatching Part 1/4: Setup https://www.youtube.com/watch?v=MqnbL8qTvaI&t Intro to Hatching Part 2/4: Incubation Period https://www.youtube.com/watch?v=vq8NvC2mH0U&t Intro to Hatching Part 3/4: Hatching Period https://www.youtube.com/watch?v=e3JzvNvvRpU&t Intro to Hatching Part 4/4: After Hatch https://www.youtube.com/watch?v=L7gtp3QQWgY&t   HumidiKit™-Auto Humidity System (Optional Selection) The answer to one of the common hassles with incubation is maintaining the humidity inside the incubator. No need to frequently fill the water reservoirs or struggle to maintain the desired humidity. This system is designed to instantly deliver accurate humidity to most incubators. The integrated digital hygrostat that measures and controls the humidity is fully adjustable so you can achieve the right humidity range for your eggs. The humidifier is designed to gently provide instant humidity and fresh air directly inside the incubator for an accurate humidity range. The humidifier also comes with a one-liter bottle which typically needs to be filled once a week for most desktop incubators. To extend the life of your HumidiKit we recommend using distilled water. This unit comes ready to install into your incubator; simply place the probes from the HumidiKit inside the incubator, insert the hose into a vent hole, fill the water bottle, and connect to power.   Includes 2-Year IncuCare Warranty!