Search results for "fan kit install":
Products
IncuKit™ XL for Cabinet Incubators 220V
from $92.99
220 Volt International Version. Click here to see the 110V North America Version. The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom-built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well.
The IncuKit XL™ series has been redesigned to provide you with more options and versatility!
IncuStat Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater and fan. This comes pre-set to 99.5 degrees F.
Select how many heater and fan modules your container will require:
The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors.
Each heater and fan module will provide 125 watts of power. For medium size containers, this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power.
To determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select.
The buyer is responsible for determining if this will generate enough heat for your enclosure.
Caution: this is an AC-powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!!
The IncuKit includes the following:
Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below)
Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125-watt heater with built-in safety thermal switch and mounting plate
All mounting hardware
Installation and operating instructions
Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together, and then plug it in. It's so easy!!
Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator:
If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.
IncuKit™ XL for Reptile Incubators
$90.99
The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside. Pretty cool? Well, actually it's pretty hot and it works very well.
The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps!
The IncuKit XL™ for reptiles includes the following:
Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.
1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator.
To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select.
The buyer is responsible for determining if this will generate enough heat for your enclosure.
Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!!
The IncuKit includes the following:
Electronic Basic Digital Thermostat
1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate
Adapter extension cord for reptile incubators
All mounting hardware
Installation and operating instructions
Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!
Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator:
If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.
Circulated Air Fan Kit for Hova Bator Incubator (220-240 V AC)
$31.99
Did you know that at any given time, the temperature in your still air incubator can vary by up to five degrees from top to bottom and from the center to the corners? This occurs primarily because heat rises. Unfortunately, this temperature variation can have a significant negative impact on your hatch rates.
This problem can be significantly reduced by installing a circulated air fan kit into your incubator. This fan circulates the air, which helps keep your whole incubator the same temperature. This can have a positive impact on hatch results. The more consistent air temperature also ensures that your thermostat is cycling on and off at the appropriate times, not just when the air around the thermostat heats or cools.
Putting a fan inside your incubator is a great way to increase hatch rates, but it is not just as simple as buying a PC fan or a cheap fan kit. There are a few things that you need to keep in mind:
Too much air circulation is bad for eggs, as it will dry them out. Think about it this way: there isn’t a fan blowing on eggs in nature. The only reason that an incubator needs the fan is to keep the temperature more consistent (like in nature). Beware of cheap kits, which often use high speed fans. Almost all fans on the market are designed for cooling things, so they are made to move as much air as possible. This is not what you want.
If your fan is too powerful it can overheat your incubator. Fans generate heat, and alternate fans are known to cook eggs.
The direction the air flows and the positioning of the fan inside your incubator is critical to maintaining a consistent temperature throughout the incubator. Our fan kit includes simple instructions on how to do this.
This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the 220-240 V AC Circulated Air Fan Kit for yourself.
Little Giant 9300 Advanced Egg Incubator Combo Kit
$162.99
Little Giant Incubator 9300
The Little Giant Incubator has a digital electronic thermostat with LCD screen and LED backlight. Made of durable styrofoam to help retain warmth and keep a constant temperature. Incubator features two 4 in x 8 in viewing windows-ideal for educational purposes and digital electronic thermostat control with digital display of temperature and humidity, plastic mesh floor (Doesn't rust or cut birds), and moisture rings (Fill the 1 or more of the moisture rings to change the humidity level). This is a 110V version, purchase the voltage converter for 220/240V use.
Little Giant Egg Turner 6300
This egg turner will automatically turn the eggs 6 times per day and comes complete with universal/Chicken sized rails that will hold 41 eggs (Can hold 41 of any size egg from Quail to Duck) . It's easy to clean and the egg racks are dishwasher safe. This combination of incubator and turner will provide you with a great all around incubator for hatching your eggs. This is a 110V version, purchase the voltage converter for 220/240V use.
Installed Circulated Air Fan Kit (Replaces 7300)
Temperature variation within the incubator has a significant impact on your hatch rates. Heat naturally rises, so you need to circulate the hot air from the hot spots to the cool spots for a much more uniform and consistent temperature and better hatch results. The more consistent air temperature also ensures that your thermostat is cycling on and off at the appropriate times, not just when the air around the thermostat heats or cools. This listing comes with a completely installed fan kit.
Optional Accessory (Select above)
Picture
UpgradePrice
Description
$18
Quail Racks for Little Giant Egg Turner 6300
-Converts Egg Turner so it can hold up to 120 quail eggs
-Easy to install (Instructions Included)
-Dishwasher Safe
$119
HumidiKit™ Automatic Humidity System
-Automatic and accurate humidity control
-Set your desired humity and it does the rest
-Programmable digital hygrostat
-Easy to install & use
$15
International Power Transformer for Egg Incubators
-This Incubator Kit uses 110V AC power (This kit includes everything needed to use the incubator kit with 220/240V Power)
-Converts 220/240V Power to 110V Power (Up to 100 Watts)
-Rated for Continuous Use - Most converters only work for 20 - 30 minutes at a time
-Can power Egg Incubator, Egg Turner, & Fan Kit