Search results for "hova-bator":

Product Features: Set of 6 Quail Rails: Holds 120 small eggs (20 per rail). Perfect Fit: Designed exclusively for the Little Giant automatic egg turner. Durable Build: Made from high-quality, dishwasher-safe plastic for easy maintenance Easy to Install: Swaps right into your Little Giant automatic egg turner with no hassle. Versatile Use: Suitable for quail, dove, finch, and other small eggs. 2-Year IncuCare Warranty. Product Description: If you're into raising quail or other small birds, you know how tricky it can be to incubate their tiny eggs properly. That's where the Little Giant quail rails come in. Designed to fit perfectly with the Little Giant Automatic Egg Turner, these rails make it easy to hatch quail and other small eggs without the hassle. This includes a set of six quail rails, each holding 20 small eggs, giving you a total capacity of 120 eggs at once. That's a lot of quail chicks in the making. The rails are designed to cradle each egg securely, keeping it upright for proper air circulation and even incubation. This setup helps reduce the risk of cracked or damaged eggs, which is especially important when dealing with fragile quail eggs. Installing the rails is super simple. No tools are required; just snap them into your Little Giant automatic egg turner. They're designed to replace the standard chicken egg racks, so it's a quick swap that gets you back to incubating in no time. Incubation can get messy. That's why these quail rails are made from durable, dishwasher-safe plastic. When cleaning up, just pop them out of the turner and throw them in the dishwasher—no scrubbing, no fuss. They're tough enough to handle regular cleaning without warping or breaking, so you can use them season after season. These quail rails provide flexibility for various small egg species. They are perfect for: Quail eggs Dove eggs Finch eggs Other similarly sized small bird eggs Pair your Little Giant quail rails with other incubation accessories like: The Egg-O-Meter to monitor egg temperatures The IncuTherm Plus Hygrometer/Thermometer to keep track of humidity and air temp The Incu-Bright Egg Candler to check embryo development Before you order, here are a few key details to keep in mind: This set includes six quail rails ONLY. The automatic egg turner is NOT included. It's not compatible with Hova-Bator Egg Turners. These rails are designed specifically for the Little Giant Automatic Egg Turner. Don't miss out on enhancing your quail hatching process. Order your Little Giant quail rails now.

Product Features: Wide Compatibility: Fits models 6300, 6200, 3200, 1610, 1611, 1612, 1614, and more. Precise Egg Turning: Completes a full rotation every 4 hours. Simple Installation: Easy to mount with pre-drilled holes and flexible for DIY setups. Durable Design: Made with high-quality materials for long-lasting use. Efficient Operation: Runs on 110V AC power and a long power cord, with low power consumption. Warranty: 2-Year IncuCare Warranty. Product Description: If you're searching for a reliable replacement for your egg turner motor, you've found it. Whether you're using a trusted brand like HovaBator, Little Giant, Farm Innovators, or a custom-built incubator, this IncuTurn™ egg turner motor has you covered. This motor's smooth operation, easy installation, and compatibility with multiple models ensure that your eggs are turned consistently and gently. That means happier hatchlings and less stress for you. It fits like a glove; there is no guesswork here. This motor fits popular egg turner models like Little Giant 6300, 6200, Farm Innovators 3200, and HovaBator 1610, 1611, 1612, and 1614. Plus, it's perfect for DIY enthusiasts who build their own incubators. Technical Specifications: Voltage: 110V AC Compatibility: 6300, 6200, 3200, 1610, 1611, 1612, and 1614 Models Mounting Type: Compatible with HovaBator, Little Giant & Farm Innovators Rotation Speed: 1 rotation every 4 hours The motor operates at a slow, steady pace to mimic natural egg movement. It completes one full rotation every 4 hours, while eggs pass their starting position every 2 hours. This slow turning prevents eggs from sitting still too long, helping embryos develop properly. It's gentle enough to handle all kinds of eggs, ensuring even the most delicate ones are treated with care. Made from high-quality materials, this motor is built to last. It's tough enough to handle long periods of use without losing performance, so you can trust it to keep your eggs moving daily. The motor runs on 110V AC power, offering stable and consistent operation. Plus, the long power cord makes it easy to position the motor wherever needed. With universal mounting holes, this motor is simple to install in your current incubator or a homemade one. Just plug it in, attach it, and you're ready to go. Your purchase includes a 2-year IncuCare Warranty, so you can rest easy knowing you're covered if any issues arise. How to Install the IncuTurn™ Egg Turner Motor Unplug the Incubator: Safety first. Ensure the incubator is powered off and disconnected from any electrical source. Remove the Existing Motor: Unscrew or unmount the old motor from your egg turner. Align the Replacement Motor: Match the mounting holes on the motor with those on the egg turner for a perfect fit. Secure the Motor: Use screws or mounting brackets to attach the motor firmly. Plug It In and Test: Power up your incubator and watch the motor in action. Don't let a faulty motor ruin your hatching plans. Give your chicks the best start in life. Order the IncuTurn™ egg turner motor now and experience the difference in quality and performance. After all, every life deserves a strong beginning.

Product Features: Complete Replacement Kit: Includes a wafer thermostat, wing nut, adjustment screw, and a new taller mounting bracket for enhanced performance. Precise Temperature Regulation: The thermostat wafer expands and contracts with temperature changes, ensuring stable heat regulation inside your incubator. Upgraded Bracket Design: Improved height for better stability and easy mounting. Compatible with GQF Incubators: Specifically designed to work with GQF Analog Cabinet Incubators and Brooders, making it an easy replacement for outdated or damaged components. Easy to Install & Adjust: Simple screw adjustments let you fine-tune the temperature with minimal effort. Product Description: Maintaining the perfect temperature inside an incubator is crucial for successful hatching. This Thermostat Wafer Kit directly replaces GQF models 3007 & 3010, ensuring accurate and consistent temperature regulation in analog cabinet incubators and brooders. Whether you're incubating poultry, reptiles, or exotic bird eggs, this thermostat wafer provides precise control over temperature fluctuations, leading to higher hatch rates and improved incubation success. If you're experiencing temperature instability, difficulty adjusting heat levels, or outdated incubator parts, this premium replacement kit is the solution you need. What's Included in the Kit? This complete incubator thermostat wafer kit includes: 1 x Thermostat Wafer – Expands and contracts with temperature changes to provide accurate heat control. 1 x Adjustable Screw – Allows for fine-tuning temperature settings for optimal incubator performance. 1 x Wing Nut – Ensures a secure fit for easy installation and adjustment. 1 x Taller Mounting Bracket – Designed for better compatibility and improved performance over older models. This all-in-one kit makes replacing your incubator's thermostat wafer quick, easy, and hassle-free. How Does the Thermostat Wafer Work? The thermostat wafer is a simple but highly effective device in many incubators. It operates using a natural expansion and contraction process: When the incubator heats up, the wafer expands, triggering the adjustment screw to reduce heat output. When the incubator cools down, the wafer contracts, allowing the heating element to turn on again. This cycle ensures consistent temperature control, which helps for proper embryo development and a successful hatch rate. Unlike digital thermostats that use sensors, the wafer system works mechanically and is reliable. That's why both breeders and hobbyists prefer it. Why Upgrade to This Thermostat Wafer Kit? The wafer thermostat is a crucial component in any incubator. It controls the internal temperature by expanding and contracting with heat changes. Over time, older wafers lose sensitivity, leading to temperature fluctuations that can negatively impact hatching rates. By replacing outdated models 3007 & 3010 with this new and improved kit, you benefit from: More precise temperature control for higher hatch success. Increased durability for long-term performance. Improved performance with the taller bracket upgrade. Step-by-Step Installation Guide Remove the old thermostat wafer from your incubator. Attach the new mounting bracket securely. Insert the new thermostat wafer and fasten it with the wing nut. Adjust the screw to fine-tune temperature settings. Test your incubator to ensure the correct heat levels are maintained.   A faulty thermostat wafer can ruin a hatching cycle. Don't take the risk. This thermostat wafer kit ensures your incubator runs smoothly, providing the perfect conditions for healthy hatchlings. Order Now.

Replacement Lid for GQF 1588 Incubator. Styrofoam and WIndow ONLY. NO Electronics. Styrofoam may contain small imperfections and marks (see pictures for examples).

Product Features: Compatible with All HovaBator Models: No need to worry about compatibility; this plastic connecting bar works with every HovaBator automatic egg-turner model. Durable Plastic Build: Made from strong, high-quality plastic, it’s built to last and withstand the repetitive motion of turning eggs. Easy to Install: Replacing the connecting bar is a hassle-free process, and you can do it yourself without any specialized tools or professional help. Restores Smooth Functioning: Once installed, your egg turner will rotate the racks smoothly again, ensuring even turning and better hatch rates. Versatile Usage: Suitable for small-scale hobbyists and larger commercial incubator systems. Cost-Effective: Save money by replacing the necessary parts instead of purchasing a new egg-turner. 2 Year IncuCare Warranty. Product Description: If you've been using your HovaBator Automatic Egg Turner for a while, you know that proper egg rotation is key to a successful hatch. But what happens when the connecting bar that links the egg racks to the motor starts to fail? Don't worry – replacing the plastic connecting bar for HovaBator automatic egg turners is a simple and affordable fix that will make your egg turner work like new again. This high-quality plastic connecting bar is designed to be a direct replacement part for all HovaBator automatic egg turners, including popular models like the HovaBator 1611 and HovaBator 1610. Whether you're a hobbyist with just a few eggs to hatch or managing a small hatchery, this part will help keep your incubator running efficiently, ensuring your eggs turn smoothly for the best possible incubation results. Product Specifications:   Dimensions: 13" x 3" x 0.25" Material: Thermoplastic Color: Yellow Weight: 0.31 lb   If you've noticed your egg turner struggling, perhaps the racks aren't turning, or the motor seems off; this could be a sign that the connecting bar is worn out. Replacing it is a quick and easy way to restore full functionality so your eggs keep turning as they should. Don't wait until your egg turner malfunctions. Order this connecting bar today and keep your egg-hatching process running smoothly. It's a small, affordable part that makes a huge difference in your incubator's performance.

Product Features:  Package Includes: 4 heat element clips. Compatibility: Compatible with most styrofoam incubators, making them versatile and easy to use. Material: Made from durable, rust-resistant metal for long-lasting use. Secure Attachment: Effectively holds heat elements in place, ensuring consistent heating. Easy Installation: Quick to install and simple to use. Corrosion-Resistant: Constructed from corrosion-resistant material to maintain reliability over time. Purchase includes our Two-Year IncuCare Warranty. Product Description: These Heat Element Clips are a must-have for your Styrofoam incubator setup. This set of four clips ensures that your heat elements are securely attached to the incubator frame, providing even heat distribution for optimal incubation conditions. With their durable, high-quality construction, these heat clips are built to last and perform reliably through extended use. Whether you're upgrading your existing incubator or making repairs, these heat element clips are an ideal choice. Plus, each set comes with a two-year IncuCare warranty. Why Choose the 1643 Heat Element Clips?   When it comes to incubating eggs, maintaining a consistent and reliable heat source is crucial. These heat element clips are designed to provide secure, stable support for heat elements within styrofoam incubators, ensuring that your incubation process is as efficient as possible. With these clips, you can rest assured that your heat element will remain securely in place, helping maintain the ideal temperature for your eggs. Perfect for DIY Incubators:   For DIY enthusiasts, these clips are a must-have accessory. If you are building your own incubator, these heat element clips are an essential part of ensuring your heat element is securely installed and positioned correctly. These clips can be used in any custom incubation setup that requires heat element support. Order now and enjoy a 2-year warranty.  

Product Features: Voltage: 110V for reliable performance Size: Fits 1/2" hole for easy installation Indicator Light: Provides clear visibility when the heat is on, so you can monitor your incubator without worry Compatibility: Perfect replacement for HovaBator 1602N incubators Functionality: Indicates when the heat is on, ensuring your incubator is working properly Durable and Long-Lasting: Designed to withstand the demands of daily use, ensuring your incubator stays in top condition Purchase includes our Two-Year IncuCare Warranty. Product Description:  Ensure your egg incubator runs smoothly with this indicator light designed specifically for egg incubators and brooders. This essential 110-volt indicator light provides a clear visual signal when the heating element is activated, keeping you informed of your incubator’s operation at all times. Whether you’re a hobbyist or a professional breeder, this light helps you maintain optimal conditions for egg incubation. Whether you're working with a HovaBator 1602N or any other similar incubator model, this light is a direct replacement, fitting perfectly into a 1/2" hole. With its 110-volt functionality, this indicator light is a simple yet effective way to keep track of your incubator's performance without the need for complex monitoring systems. The durable construction ensures long-lasting performance, and its compact design makes it easy to install and integrate into various incubator and brooder setups. With its straightforward installation process, you can replace your old or malfunctioning indicator light with ease and get back to managing your incubation process efficiently. Order this indicator light today and never miss a beat in your hatching process.