Search results for "incubator":

Replacement Power Supply for Nurture Right 360 Incubator. High Quality Incubator Warehouse Replacement (NOT OEM). Color: Black Standard 2-Prong U.S. Design. 110V-240V AC power input 12V 5A DC output.

Did you know that at any given time, the temperature in your Little Giant still air incubator can vary by up to five degrees from top to bottom and from the center to the corners? This occurs primarily because heat rises. Unfortunately, this temperature variation can have a significant negative impact on your hatch rates. This problem can be significantly reduced by installing a circulated air fan kit into your incubator. This fan circulates the air, which helps keep your whole incubator the same temperature. This can have a positive impact on hatch results. The more consistent air temperature also ensures that your thermostat is cycling on and off at the appropriate times, not just when the air around the thermostat heats or cools. Putting a fan inside your incubator is a great way to increase hatch rates, but it is not just as simple as buying a PC fan or a cheap fan kit. There are a few things that you need to keep in mind: Too much air circulation is bad for eggs, as it will dry them out. Think about it this way: there isn’t a fan blowing on eggs in nature. The only reason that an incubator needs the fan is to keep the temperature more consistent (like in nature). Beware of cheap kits, which often use high-speed fans. Almost all fans on the market are designed for cooling things, so they are made to move as much air as possible. This is not what you want. If your fan is too powerful it can overheat your incubator. Fans generate heat, and alternate fans are known to cook eggs. The direction the air flows and the positioning of the fan inside your incubator is critical to maintaining a consistent temperature throughout the incubator. Our fan kit includes simple instructions on how to do this. Miller Manufacturing has stopped producing the 7200 fan kit, but this kit can take its place. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Little Giant Circulated Air Fan Kit for yourself. Video: Installation Video

Removing the hatching tray allowed us to space the trays further apart and have them turn to a steeper angle. The No. 1500 is exempt from use as a hatcher allowing it to avoid the mess associated with hatches and remain clean. This incubator only has to maintain one humidity setting making it easier on the eggs and easier to operate. The “PROFESSIONAL” is designed to be used with the No. 1550 HATCHER. We recommend purchasing the two together. Up to three No 1500’s can be used with one hatcher for a weekly production of chicks from a laying flock. The No. 1500 incubator offers an accurate digital thermostat with LCD display of Temperature and Humidity. An on-board computer monitors systems and the environment every second to keep itself updated and to share this data with you. Electronic egg turning control, audio/visual indicators and a standard easy view door highlight a number of features. Constructed from high strength plastic board making it well insulated, quieter, and easier to clean. Each unit is hand assembled by our skilled craftsmen and tested for a full 24 hours for proper operation and calibration. Thermostat operating range between 60 and 103 degrees F. depending on room temperature. 110-120VAC, 50/60 Hz, 325 Watts TUV Listed This incubator includes: 1 #3258 Digital Command Center thermostat 3 turning racks 1 moisture pan with 2 wick pads Instruction booklet Total Capacity with plastic trays (sold separately): 1368 Quail Eggs (set and hatch 250 per week), 354 pheasant eggs, 270 chicken eggs, 198 turkey or duck eggs, and 36-45 larger eggs such as goose, peafowl, and emu. Actual capacity may depend on egg size. DIMENSIONS: 30 1/4” Front to Back, 15 3/4” Wide, 31 3/4” High. PLASTIC EGG TRAYS SOLD SEPARATELY 1243 (Quail), 1245 (Pheasant), 1246 (Chicken), 1248 (Duck/Turkey)

Replacement Hatching Tray Mat for IncuView XL

This is a printed version of our 4 Part of our Intro to Hatching YouTube Series (see video links below) Illustrated Guide to Hatching Basic introduction to incubating eggs and brooding chicks Product has references to our products but is overall very educational and informational 28 Pages See Pictures for a sneak peak YouTube Video Series Intro to Hatching Part 1/4: Setup https://www.youtube.com/watch?v=MqnbL8qTvaI&t Intro to Hatching Part 2/4: Incubation Period https://www.youtube.com/watch?v=vq8NvC2mH0U&t Intro to Hatching Part 3/4: Hatching Period https://www.youtube.com/watch?v=e3JzvNvvRpU&t Intro to Hatching Part 4/4: After Hatch https://www.youtube.com/watch?v=L7gtp3QQWgY&t

This listing is for brand new battery connector set for the Genesis 1588 and the IncuKit Mini / IncuView. This connector allows you to power your incubator with a battery.NOTE: Please select the type of connector you need from the drop-down menu The alligator style clips will easily connect to the positive and negative terminals on your 12VDC battery The barrel connector ends plugs into the power wire of the Genesis 1588 or the power port of the IncuKit DC / IncuView This is great for a back-up power supply for those who may have frequent power outages A 12VDC battery can be your primary power source for those who are off the grid Would you like to see how this is used with the Genesis 1588 and IncuKit DC / IncuView? See this short video:

Incubator Warehouse's Digital Electronic Egg Incubator Thermostat Description: This thermostat is very simple to use.  Just press the up arrow to set the temperature (in 0.1 degree increments).  There is a flame indicator on the screen that shows when the heater is operating.  The unit has an 18 inch remote sensor that is placed inside the incubator.  The white thermostat case is then mounted on the outside of the incubator.  Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Thermostat set point can be adjusted to any temperature between 41 - 113 degrees Fahrenheit Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) Select your voltage above in the drop down box (220/240V AC ONLY).  220/240V AC is for most places outside of North America. Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7.  NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should.  As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine!  This is true with any incubator and egg configuration.  Calibration Enabled.  This means that you can calibrate the thermostat to a specific temperature.  For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds). Product Instructions: IncuStat™ Basic

4" Butterfly Vent for Cabinet Incubator (5" total diameter). Metal.

The Clear Automatic Humidity & Water Reserve System for GQF Cabinet Incubators makes incubating easier and more efficient than ever! To check the water level simply look at the water reserve and the clear walls make it easy to see the water level. Simple as that! Using this product allows you to keep your humidity pan at a steady level without having to open your incubator frequently and letting all the humid warm air out. It helps keep the environment inside your cabinet more consistent throughout your hatch. The float mounts to the side of your existing humidity pan in your cabinet. No modifications necessary! Water can be heavy in large quantities so to refill your reserve you can easily add water simply by opening the convenient lid of the reserve and pouring more water in. You can also disconnect the reserve and refill it that way. Our goal is to make your incubation experience easier and more convenient for you. This product delivers just that! As always, all our products are covered by our 1-year Hassle-Free Guarantee. Purchase today with no worries and experience the simplicity of the Clear Automatic Humidity & Water Reserve System.

If you’re looking for a small easy-to-use incubator then look no further than the AccuHatch. Features/Applications: The AccuHatch uses CIRCULATED AIR FLOW. The heating bands above the fan unit gently warm the inside of the incubator as the fan circulates the air in your incubator for an even temperature throughout. This incubator is made of a durable thick plastic making it last longer, retain heat better, and be much easier to clean after your eggs hatch. It also includes a clear base for 360 degree viewing around your incubator sides. 2 tray levels included. 1 for incubation and another for hatching in those final days when you remove the turner tray. The AccuHatch incubator includes a water tray with 3 sections to easily control humidity. With 3 different sized reservoirs it is simple to get your humidity level adjusted. Simply pour water in the main reservoir until it is full. If you need more humidity, just keep adding and water and it will will spill over into the medium and then the large reservoir through the integrated EZ overflow ports. The built-in hygrometer helps you keep the humidity in the right range for a great hatch. The AccuHatch will hold approximately 9-12 Chicken, 6 Duck size eggs, 3 Goose eggs or 20 Quail size eggs with the automatic egg turner. Additional accessories can be purchased to enhance the hatch rate and over all experience. These include: IncuTherm Plus Thermometer/Hygrometer and an Incu-Bright egg candler. The AccuHatch is an ideal small incubator for anyone new to hatching eggs. For those with experience it can also be an easy alternative for smaller egg batches and still get the maximum experience out of your incubator. As with all the products we sell, the AccuHatch is covered by our Two-Year IncuCare Warranty. Purchase today with no worries and experience the AccuHatch incubator for yourself! International Customers This incubator uses 110 Volt AC Power. For international customers (220/240V) please purchase the IncubatorWarehouse.com international power converter to maintain product warranty.

Replacement Lid for GQF 1588 Incubator. Styrofoam and WIndow ONLY. NO Electronics. Styrofoam may contain small imperfections and marks (see pictures for examples).

Replacement Alarm for GQF Cabinets 3-24V DC

This fan is made with durable ball bearings for long life. Mounting holes on each corner make mounting in your incubator very easy. Just wire into your incubator so the fan is always on to keep your cabinet incubator temperature uniform. We also sell a 220V version for international use. 110V AC, 80-105 CFM, 0.25 Amps, 22 Watts Purchase includes Two Year IncuCare Warranty.

Set of 2 clear plastic windows for Little Giant 9300 Incubator

This is a Brand New Sammax style thermostat that works GREAT in an incubator!  Included with purchase: Thermostat with a temperature range of 80-105 F (Long 1.5" shaft can go through thick styrofoam walls)  Control Knob with set screw and mini screwdriver Lead wires with insulated connectors for thermostat Screw nut that screws onto the thermostat shaft to help attach to a surface or panel 15A rating Can be used with either AC or DC applications Comes with a wiring diagram for wiring in a fan and a heater Caution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protective screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!