Search results for "buy eggs":

Keep your egg turner operating smoothly with this genuine Kebonnixs replacement motor. Designed for a precise fit and consistent rotation, it ensures proper egg turning to support healthy embryo development throughout the incubation cycle. Built for reliable, long-term performance and easy installation, this motor is the ideal solution for restoring a slow, noisy, or non-functioning turner system.

IncuStat Advanced for IncuKit XL. This device lets you add a sophisticated control module to your cabinet (or larger-style) egg incubator. This is designed to control the temperature, air circulation and automatic turner motors in your incubator. Key features- On/Off Thermostat- Comes pre-set to 100 degrees F (easily adjustable, if desired)- Electronically controlled - Digital display- Controls the heater, fan and egg turner motors (it is not required to use this module to control all accessories, if you desire not to)- Hatch Day Counter- Thermostat can be calibrated- 110/120v power input (Standard US Power)- Remote sensor for accurate temperature reading- Easily mounts onto your incubator- Maximum heater wattage: 300 watts total (see note below if you need more power) NOTE: if your incubator needs more power than 300 watts, you have the option of using a heater that is always on in order to bump up the entire wattage inside the incubator. For example, if you think you will need about 350 watts for your incubator, you can put a 60-watt light bulb inside the incubator that is always on. Then when the heater that you are regulating with the thermostat is on, you will have enough power in your incubator. Feel free to contact us if you would like further clarification about this option.    What is the difference between a proportional thermostat and an on/off thermostat? A non proportional (on/off) thermostat turns the heater on at full power when the temperature drops below the set point, and shuts it off completely once the target temperature is reached. This simple, tried and true approach works very well in most incubator set ups, especially when the incubator is well insulated. It's a great choice for DIY incubators because it's easy to set up, easy to adjust, and reliably keeps temperatures in a safe range for hatching. A proportional thermostat, by comparison, constantly adjusts the power to the heater depending on how close it is to the target temperature. While that can reduce temperature swings slightly, the added complexity often isn't needed. Motor control:  This unit also features a built in motor control function, programmed to turn on for 13 seconds every 2 hours. This is ideal for automatic egg turning in many DIY incubator setups. Please note: This timing is pre-programmed and not adjustable.

Replace a damaged or worn incubator bottom with this genuine Kebonnixs replacement base. Designed for a precise fit, it securely supports the incubator components while maintaining proper alignment and stability during operation. Durable and easy to install, it’s an ideal solution to extend the life of your incubator. BASE ONLY

This OEM replacement heater is designed exclusively for the Maticoopx 20-Egg Incubator. It restores proper, consistent heating performance and helps maintain the stable environment needed for a successful hatch.If your incubator is struggling to reach temperature, fluctuating more than normal, or recovering slowly after the lid is opened, the heater may need to be replaced. Installing a new heater returns the unit to optimal performance.Features Direct OEM replacement for the Maticoopx 20-Egg model only Restores consistent, even heat Easy installation Durable construction for long service life Helps maintain ideal incubation conditions Compatibility: This heater is ONLY compatible with the Maticoopx 20-Egg Incubator. It is not interchangeable with the Maticoopx 30-Egg heater or other brands/models.

Bring your incubator back to optimal performance with this genuine Kebonnixs replacement lid. Engineered for a precise, secure fit, it helps maintain consistent internal temperature and humidity levels while providing clear visibility throughout the entire hatch cycle. Made from durable, high-clarity material, this lid is an ideal solution for replacing cracked, warped, or damaged originals helping extend the life of your incubator and protect your hatch. LID ONLY

The 3169 - 2 Fan Heater Assembly is a reliable heater fan for incubators. It fits GQF 1500 series cabinet incubators. Dual fans provide even heat and steady airflow. Made from durable aluminum, it upgrades older DC fan models to a modern fan/heater assembly.  Product Description: The 3169 heater fan for incubators ensures consistent temperatures in cabinet incubators. It works with GQF 1500 series models, including 1500, 1502, and 1550. Dual fans improve air circulation for even heat. This assembly replaces old DC fans or upgrades them to modern fan/heater setups. Aluminum construction lasts for years. Quick installation keeps your incubator ready fast. Ideal for egg incubators and commercial hatching. Product Features: Dual Fan Heater for consistent airflow. Fits GQF 1500 series models (1500, 1502, 1550). Converts older DC fans to a modern fan/heater assembly. Durable aluminum construction. Easy installation with included instructions. Works as an under-cabinet or under-counter fan heater. Ideal egg incubator heater fan. Complete replacement for the cabinet incubator heater assembly. Technical Details: Brand: Pinnon Hatch Farms Color: Black Mounting: Wall Mount Power Source: Corded Electric Heating: Fan & forced air Voltage: 120V AC Weight: 4.75 lbs Package: 15 x 9 x 7 inches Installation & Use: Unpack carefully. Follow the included instructions. Mount on the cabinet wall. Connect electric power securely. Keep fans unobstructed. Works with GQF 1500 series models. It can be under the cabinet or counter. Test before adding eggs. Warranty: 2-year IncuCare warranty included.Covers manufacturing defects.Protects your investment. Next Steps Order the 3169 - 2 Fan Heater Assembly now. Keep your incubator running efficiently. Ensure even heat for every egg.  

Complete Setup for Successfully Incubating Reptile Eggs Take the guesswork out of reptile egg incubation with the Reptile Incubation Starter Kit, a complete, easy-to-use system built around the versatile GQF 3100 Chick Bator incubator. Designed for consistency and simplicity, this kit gives you the essential tools needed to maintain proper temperature and humidity for successful reptile hatching. Whether you're incubating snake, gecko, or lizard eggs, this setup provides a dependable environment without unnecessary complexity. What’s Included: GQF 3100 Chick Bator Incubator Digital temperature control for accurate and stable settings Fan can be turned off to allow still-air operation when preferred for certain reptile species Clear viewing window for monitoring without disrupting the environment Reptile Substrate KitSpecially selected to retain moisture and maintain proper humidity levels around eggs. Helps prevent dehydration while supporting proper embryo development. 1252 Digital HygrometerAccurately monitor humidity levels inside your incubation containers, critical for preventing egg collapse or excess moisture.  

Introducing the Aquatank that takes the trouble out of incubation. The AquaTank for IncuView 3 Pro maintains humidity over time without requiring lid openings or water level checks. For the hatching rookie all the way up to seasoned veterans, this add-on unit cannily plugs into your IncuView 3 Pro and provides no-nonsense moisture management where you need it—inside the chamber, not on your to-do list: fewer refills, less variance, and better hatches. Product Description Brought to you by Incubator Warehouse, the AquaTank is an intelligent secondary reservoir explicitly designed for use with your IncuView 3 Pro, which maintains humidity perfectly effortlessly from setup until hatch day. The efficient design allows you to add water without disturbing the incubation process, and the higher capacity also ensures your humidity is more stable between too long refills. Eggs are always at risk: from minor disturbances, such as a temperature fluctuation during a power outage, to major disruptions along the chick’s route through your farm. This aquatank will automatically control humidity and provide oxygen, perfectly supporting healthy hatching in eggs of chickens, quail, wood ducks, and pheasants. It’s a tiny upgrade with an oversized impact! Product Features More water capacity for longer humidity stability Works seamlessly with IncuView 3 Pro; no fuss installation Less topping-off throughout the whole hatching process Non-invasive top-up—fill without opening the incubator Heavy-duty construction designed for multiple hatching cycles Consistency that pays off with backed-up hatch rates Technical Details Model Version: AquaTank (compatible with IncuView 3 Pro) External Humidity Reservoir/Incubator Water Supply Type Fitment: Specially built for IncuView 3 Pro Incubator Refill Type: External—keep humidity up without opening the lid Objective: Long-term water retention for uniform humidity throughout the incubation Easy to install: No tools, easy to attach to the unit Additional Information Compatibility: IncuView 3 Pro Incubator Care: Rinse and air dry in between hatches; follow your incubator manual’s water guidelines (use clean distilled water if stated) Usage Tips: As with other humidors, run as you would monitor your humidity, and expect to refill less often due to the combined volume of a Visol product. Package Includes1× AquaTank reservoir for IncuView 3 Pro Warranty Supported by Incubator Warehouse’s Two-Year IncuCare Warranty for safe, long-lasting use. Order Now! Give your IncuView 3 Pro an edge you can trust—consistently maintained humidity, less fuss and worrying while hatching with IncuCare.

Product Features: Powerful Air Circulation: Spreads heat evenly inside the incubator. Durable Ball Bearings: Long-lasting performance with less maintenance. Easy Installation: Four corner-mounted holes make mounting simple and secure. Energy Efficient: Uses only 0.25 Amps and 22 Watts, reducing power consumption. Compact & Versatile: Ideal for cabinet incubators and other ventilation needs. Reliable Power: Runs on 110V AC with airflow of 80-105 CFM Includes 2-Year IncuCare Warranty. Product Description: Keeping the right temperature and humidity in your incubator is key for successful hatching. This 110V AC incubator fan for the cabinet egg incubator provides consistent airflow. It helps to move air evenly, keeping the temperature the same everywhere. This stops hot or cold spots that could harm egg development. This fan has high-quality ball bearings for long life and smooth use. Unlike sleeve-bearing fans, which wear out quickly, and can only be installed in one direction, ball-bearing fans last longer and need fewer replacements. This saves money, making it a smart choice for those who rely on their incubators for continuous hatching cycles. With its pre-drilled mounting holes in each corner, installing this egg incubator fan is easy. Whether you're adding a new fan or upgrading, you can attach it in a few quick steps. Just connect the wires to keep air circulating all the time. Technical Specifications Voltage: 110V AC Airflow: 80-105 CFM (Cubic Feet per Minute) Power Consumption: 22 Watts Current: 0.25 Amps Bearing Type: Ball Bearings Mounting: Four corner holes for secure installation   This axial fan is specifically made for cabinet egg incubators. It keeps the temperature steady for better hatching and spreads heat evenly, ensuring every egg gets the proper heat and ventilation. Need a 220V Version? No worries if you're outside the U.S. or need a different power setup. We also offer a 220V version. Check our store for more details. Don't let poor airflow ruin your hatch rates. Order now to give your eggs the best possible incubation environment.

Product Features: Customizable Hatch Divider: Incubate multiple egg types in a single space while keeping them separate. Perfect for chicken, quail, duck, and other bird eggs. Enhanced Air Circulation: The honeycomb mesh design ensures even airflow and humidity distribution for consistent hatching success. Customizable and Adjustable: The interlocking design allows you to modify the setup based on your incubation needs. Durable & High-Quality PLA Plastic: Made from sturdy, long-lasting materials for repeated use. Easy to Install & Remove: Simple interlocking design allows quick assembly and disassembly. Compatible with Nurture Right 360 Incubator: Specifically designed for seamless integration with the Nurture Right 360 incubator. Durable and Long-Lasting: Designed for multiple incubation cycles, providing excellent long-term value. Includes Two-Year IncuCare Warranty. Product Description: If you want a simple way to hatch different bird eggs at the same time, the Nurture Right 360 Hatch Divider is a great choice. It works with the Nurture Right 360 Incubator and helps you keep eggs separated by species, size, or breed. This makes sure each egg gets the best hatching conditions. You can use it for chicken, duck, quail, or other poultry eggs. The divider also helps you save space while keeping the right airflow and humidity. A great feature of this hatch divider is its customizable configuration. It has 4 interlocking sections, letting you create up to four separate compartments. This makes it perfect for hatching different bird species at the same time. Whether you need to separate chicken, duck, quail, or exotic bird eggs, this incubator divider allows for precise organization without compromising hatch quality. This divider keeps larger eggs from rolling into smaller ones, preventing damage during incubation. This is especially important for breeders who want to incubate multiple poultry breeds in one batch without mixing up the birds after hatch. Product Specifications Material: High-quality PLA plastic Design: 4-section customizable divider Compatibility: Fits Nurture Right 360 Incubator Installation: Tool-free, interlocking panels Setting up the Nurture Right 360 Divider is easy. Its snap-in interlocking design lets you assemble it quickly. Just place the dividers where you need them and snap them in. After hatching, remove and clean the divider for the next use. Important Care Note: This product is NOT dishwasher safe. To clean, simply wipe with a damp cloth or rinse with mild soap and warm water. Perfect for Most Egg Types (Including) Chicken Eggs Duck Eggs Turkey Eggs Quail Eggs Goose Eggs Why Choose the Nurture Right 360 Divider Designed Specifically for the Nurture Right 360 Incubator – Designed for a perfect fit and top performance. Prevents Egg Rolling & Damage – Keeps eggs securely in place to prevent movement that could affect hatch rates. Supports Multi-Breed Hatching – Lets you hatch different species at the same time. Lightweight Yet Durable – Made from high-quality PLA plastic for long use. Easy to Use & Maintain – Easy to install and wipe down. If you want an easy way to hatch different breeds, the Nurture Right 360 Divider is a great choice. It keeps eggs organized, secure, and well-ventilated, helping you achieve better hatch rates with less hassle. Order your incubator divider now. Note: The incubator and water port cover are sold separately.

Keep your GQF incubator running smoothly with this reliable replacement command center, with Sensor included. Designed for models 1500, 1502, it ensures accurate temperature control. Easy to install, it works just like your original command center or thermostat. Don’t let a faulty unit slow your hatching. Order today and get your incubator back to peak performance. Product Description This GQF 3258 digital command center and sensor replacement is built for reliability and ease of use. It restores full functionality to your cabinet incubator. Whether you have models 1500, 1502. This replacement fits perfectly. Installation is simple and hassle-free. Keep your incubator temperature accurate and consistent. Each unit comes with a 2-year IncuCare warranty for peace of mind. Get back to efficient hatching quickly with this essential replacement part. Product Features: High-Quality Replacement: Works as a direct replacement for your GQF 3258 digital command center. Model Compatibility: Fits GQF Cabinet models 1500, 1502. Reliable Performance: Keeps incubator temperature steady for successful hatching. 3282 Sensor included with purchase Technical Information: Power Supply: 120V or 240V AC (depending on your incubator model) Temperature Range: 68°F – 108°F (20°C – 42°C) Control Type: Digital (3258) Wiring Connection: Model-specific; 1550 wiring differs from 1500/1502 Dimensions: Command Center – 6.5" x 4" x 2" (approx.) Weight: 0.8 lbs (approx.) More Details: Use the 3258 Command Center to replace your current digital unit. Must have an existing 3258 Command Center installed. Not compatible with non-GQF cabinets. Replacement Inside Sensor included for current model 3258 Command Centers Warranty: This product comes with a 2-year IncuCare warranty covering defects in materials and artistry. During the warranty period, you can replace or repair any faulty units. The process is simple and ensures minimal downtime, giving you peace of mind while keeping your incubator running efficiently. Ready to Buy: Keep your incubator working at its best. Add the GQF 3258 digital command center and sensor to your cart today!

Bring your incubator back to peak performance with this genuine Kebonnixs replacement heater. Engineered for precise temperature control and even heat distribution, it helps maintain the stable, consistent warmth essential for strong hatch rates. Designed for a direct fit and dependable operation, this heater integrates seamlessly with your Kebonnixs unit for reliable performance throughout the entire incubation cycle. An ideal solution for replacing weak, inconsistent, or failed heating elements and extending the life of your incubator.

Keep your egg turning system operating smoothly with this genuine Kebonnixs replacement turner gear. Designed for a precise fit and dependable performance, it helps transfer motion from the motor to the turning mechanism for consistent, scheduled egg rotation. Proper egg turning is essential for healthy embryo development, and this durable replacement gear helps ensure your incubator continues to operate reliably throughout the entire hatch cycle. Ideal for replacing worn, or stripped gears.

This is a replacement clear lid only for the Maticoopx 30-Egg Incubator. It includes just the lid, no base, hardware, or electronics. The clear lid allows full visibility of your eggs and chicks while helping maintain stable heat and humidity levels. If your original lid is cracked, warped, or cloudy, replacing it ensures your incubator can properly regulate its environment and gives you a clean, unobstructed view of the hatch. Features Direct OEM replacement for the Maticoopx 30-Egg model only Lid only – no additional parts included Crystal-clear visibility for monitoring eggs Helps maintain temperature and humidity consistency Lightweight, durable, and easy to install Compatibility: Fits ONLY the Maticoopx 30-Egg Incubator. It will not fit the 20-Egg version or any other brand/model.

This replacement fan is designed specifically for the Maticoopx 20-Egg Incubator. Proper airflow is essential for maintaining consistent temperature and humidity throughout the incubator, and replacing a worn or noisy fan can greatly improve hatch performance. Features OEM replacement for the Maticoopx 20-Egg model Helps maintain stable airflow across all eggs  Easy, plug-and-play installation Restores optimal performance to your incubator Get your Maticoopx 20 up and running again!