Search results for "fan kit install":

Product Features: Engineered for Egg Safety: Moves just the right amount of air—no over-drying. Whisper Quiet Vibration Pads: Sleep soundly while your incubator runs silently. Temperature Regulation: Helps to reduce temperature variation within the incubator, ensuring more consistent conditions for your eggs. Optimized Airflow: The fan kit circulates air, balancing temperatures throughout the incubator for better hatch rates. Custom-Fit Design: Specifically designed for the Hova Bator Incubator, ensuring a perfect fit and easy installation. Fan Assembly: High-quality fan kit specifically designed for Hova Bator Incubators. Mounting Hardware: All necessary hardware to install and secure the fan inside your incubator. Full Color Instructions: Detailed installation guide with easy-to-follow steps. Video Guide: Step-by-step video tutorial for quick and hassle-free installation. Purchase includes our Two-Year IncuCare Warranty. Product Description: Looking to take your hatch game to the next level? The Circulated Air Fan Kit for the Hova Bator Incubator is your secret weapon. Designed to replace the discontinued 7200 model, this fan kit helps you create the perfect environment by keeping air temperature consistent across the entire incubator. No more hot tops and cold corners — just a well-balanced hatch zone that increases your chances of success. Why Choose This Circulated Air Fan for an Incubator? In still-air incubators like the Hova Bator, temperature can vary by up to 5°F between the top and bottom. That inconsistency can seriously hurt your hatch rate. Heat naturally rises, causing cooler pockets near the base and corners. This fan eliminates that problem by circulating the air evenly, a key factor for a stable hatch environment. Designed Specifically for Egg Incubators Not all fans are created equal — and using the wrong one can do more harm than good. Many off-the-shelf fans are designed to move massive amounts of air, which is bad for your eggs. Over-circulation dries out the shell membrane and can lead to overheating. This kit uses a low-RPM fan designed to circulate just enough air, mimicking natural convection, without drying out the eggs or causing temperature spikes. Pro Tip: It's not about blasting air — it's about consistent warmth. This kit gets that balance just right. Custom Fit. Hassle-Free Installation With Miller Manufacturing discontinuing the 7200 fan, finding a reliable replacement has become challenging. This fan kit is the ideal upgrade for a perfect fit inside your Hova Bator incubator. It includes detailed visual instructions and hardware, so you'll have it installed quickly. Whether you're a first-time hatchmaster or a seasoned breeder, you'll appreciate the simplicity and effectiveness of this plug-and-play solution. Avoid These Common Fan Kit Mistakes Most aftermarket fan kits: Use high-speed fans meant for computers (they over-dry eggs) Produce excessive heat (leading to embryo death) Lack of proper airflow control Offer zero instructions or support Our kit avoids every one of those pitfalls. Circulated Air Fan for Incubator — Benefits at a Glance Balanced Airflow: Eliminates hot/cold zones for uniform incubation Low-Speed Design: Prevents egg dehydration and overheating Plug-and-Play Fit: Mounts directly to your Hova Bator lid Two-Year Warranty: Shop with confidence — covered by IncuCare Visual Instructions: Easy installation with color guide + step-by-step video Replacement for 7200 Kit: No need to scour the internet — this is the trusted alternative solution What Makes This Fan Kit Stand Out? Precision Airflow: Just enough circulation to stabilize temps without over-drying eggs. Purpose-Built Hardware: Specifically engineered for the Hova Bator incubator, not a generic PC fan. Smart Thermostat Cycling: Helps your thermostat kick in when it should, thanks to a more stable interior climate. Trusted Brand: Incubator Warehouse is known for high-quality, reliable incubation accessories. Perfect for Hobbyists & Professionals Alike Whether you're hatching a dozen quail or a clutch of chicken eggs, you know consistency is key. This kit gives you a professional edge without needing professional tools. For backyard breeders, science teachers, homesteaders, and small farms, this kit is for you. Installation Made Simple You're not alone! Along with the kit, you'll receive: A full-color printed instruction guide A comprehensive installation video All the necessary mounting tools Follow the steps, and your still air incubator will transform into a powerful circulated chamber in minutes Important Note This is the Fan Kit Only. The incubator shown in the images is NOT included. Order Now – Experience Better Hatch Rates Fast You've put time and care into selecting your eggs. Don't leave hatch results up to chance with a still-air setup. Upgrade to the Circulated Air Fan Kit for the Hova Bator Incubator today and enjoy stable, optimized temperature control. Fast Shipping Trusted Brand Exclusive Two-Year Warranty 1000s of Satisfied Breeders Buy Now from Incubator Warehouse and take the guesswork out of incubation.  

Transform your DIY incubator into a powerful, professional-grade hatcher with the IncuKit™ XL with Recirculating Fan. Designed for those building custom egg incubators, this all-in-one incubator kit combines a precise thermostat, high-efficiency heater fan, and a recirculating air system for uniform climate control. Whether you're incubating chicken, quail, reptile, or duck eggs, this kit ensures ideal conditions for better hatch rates. Product Description The IncuKit™ XL (with Recirculating Fan) is the ultimate solution for poultry keepers, hobbyists, and farmers looking to upgrade their DIY incubator. Built to work in incubators up to 120 quail eggs or 60 chicken eggs, it’s compatible with various box-style setups. This unit includes a powerful heater fan, digital thermostat with LCD display, and a recirculating fan system to evenly distribute warm air—perfect for chicken incubators, reptile incubators, or even as a brooder heater post-hatch. It’s also ideal for anyone who wants full climate control without building electronics from scratch. Product Information Brand: Incubator Warehouse Product Name: IncuKit™ XL with Recirculating Fan Use Case: Egg Incubator, Brooder Heater, Farm Equipment, Reptile Incubator Capacity: Up to 120 quail eggs or 60 chicken eggs Application: Suitable for custom or replacement incubator parts Technical Details Power Input: 110V AC Heating Element: 220-watt resistive heater Thermostat Range: 60–104°F Display: Digital LED with real-time temperature reading Fan System: Built-in recirculating fan for even heat distribution Sensor: High-accuracy probe for tight temperature regulation Additional Information This egg incubator kit is a game-changer for hobby breeders and small farm operators. It supports better hatch rates through reliable temperature regulation. Easy to install and maintain, it helps eliminate hotspots—ideal for building or upgrading poultry incubators and reptile setups. Warranty & Support All IncuKit™ systems come with a 2-year warranty and expert USA-based support. Need help with installation? Our customer service team is happy to walk you through it.

Product Features: Compatible Replacement: Replaces the discontinued Little Giant 7200 fan kit. Temperature Regulation: Helps to reduce temperature variation within the incubator, ensuring more consistent conditions for your eggs. Optimized Airflow: The fan kit circulates air, balancing temperatures throughout the incubator for better hatch rates. Custom-Fit Design: Specifically designed for the Little Giant Incubator, ensuring a perfect fit and easy installation. Fan Assembly: High-quality fan kit specifically designed for Little Giant Incubators. Mounting Hardware: All necessary hardware to install and secure the fan inside your incubator. Full Color Instructions: Detailed installation guide with easy-to-follow steps. Video Guide: Step-by-step video tutorial for quick and hassle-free installation. Purchase includes our Two-Year IncuCare Warranty. Product Description: Looking to take your hatch game to the next level? The Circulated Air Fan Kit for the Little Giant Incubator is your secret weapon. Designed to replace the discontinued 7200 model, this fan kit helps you create the perfect environment by keeping air temperature consistent across the entire incubator. No more hot tops and cold corners — just a well-balanced hatch zone that increases your chances of success. Why Choose This Circulated Air Fan for an Incubator? In still-air incubators like the Little Giant, temperature can vary by up to 5°F between the top and bottom. That inconsistency can seriously hurt your hatch rate. Heat naturally rises, causing cooler pockets near the base and corners. This fan eliminates that problem by circulating the air evenly, a key factor for a stable hatch environment. Designed Specifically for Egg Incubators Not all fans are created equal — and using the wrong one can do more harm than good. Many off-the-shelf fans are designed to move massive amounts of air, which is bad for your eggs. Over-circulation dries out the shell membrane and can lead to overheating. This kit uses a low-RPM fan designed to circulate just enough air, mimicking natural convection, without drying out the eggs or causing temperature spikes. Pro Tip: It's not about blasting air — it's about consistent warmth. This kit gets that balance just right. Custom Fit. Hassle-Free Installation With Miller Manufacturing discontinuing the 7200 fan, finding a reliable replacement has become challenging. This fan kit is the ideal upgrade for a perfect fit inside your Little Giant incubator. It includes detailed visual instructions and hardware, so you'll have it installed quickly. Whether you're a first-time hatchmaster or a seasoned breeder, you'll appreciate the simplicity and effectiveness of this plug-and-play solution. Circulated Air Fan for Incubator — Benefits at a Glance Balanced Airflow: Eliminates hot/cold zones for uniform incubation Low-Speed Design: Prevents egg dehydration and overheating Plug-and-Play Fit: Mounts directly to your Little Giant lid Two-Year Warranty: Shop with confidence — covered by IncuCare Visual Instructions: Easy installation with color guide + step-by-step video Replacement for 7200 Kit: No need to scour the internet — this is the trusted alternative solution What Makes This Fan Kit Stand Out? Precision Airflow: Just enough circulation to stabilize temps without over-drying eggs. Purpose-Built Hardware: Specifically engineered for the Little Giant incubator, not a generic PC fan. Smart Thermostat Cycling: Helps your thermostat kick in when it should, thanks to a more stable interior climate. Trusted Brand: Incubator Warehouse is known for high-quality, reliable incubation accessories.   Perfect for Hobbyists & Professionals Alike Whether you're hatching a dozen quail or a clutch of chicken eggs, you know consistency is key. This kit gives you a professional edge without needing professional tools. For backyard breeders, science teachers, homesteaders, and small farms, this kit is for you. Installation Made Simple You're not alone! Along with the kit, you'll receive: A full-color printed instruction guide A comprehensive installation video All the necessary mounting tools Follow the steps, and your still air incubator will transform into a powerful circulated chamber in minutes. Important Note This is the Fan Kit Only. The incubator shown in the images is NOT included. Order Now – Experience Better Hatch Rates Fast You've put time and care into selecting your eggs. Don't leave hatch results up to chance with a still-air setup. Upgrade to the Circulated Air Fan Kit for the Little Giant Incubator today and enjoy stable, optimized temperature control. Fast Shipping Trusted Brand Exclusive Two-Year Warranty 1000s of Satisfied Breeders Buy Now from Incubator Warehouse and take the guesswork out of incubation.  

Designed for Egg Incubator Performance: Tailored for the Little Giant 9300 still-air incubator (also compatible with 10300 & 11300), this ventilation fan kit transforms your incubator into a circulated-air system. Essential Fan Assembly: Includes the radiator fan, replacement fan plate, and a color-coded installation guide, offering the complete fan kit for seamless setup. Improved Hatch Rates: Eliminates hot and cold spots inside the incubator, fostering a stable environment for eggs and boosting hatch success. Quiet, Durable Operation: Low-noise incubator fan engineered for continuous use; ideal for nursery setups. Easy Fan Replacement: Pre-wired and plug-and-play—no soldering or rewiring required. Product Description Convert your still-air Little Giant incubator into a higher-performing circulated-air egg incubator with this dedicated fan replacement kit. The fan parts—fan, plate, and wiring—are precision-matched to the 9300 series, ensuring a perfect fit and optimal airflow. The gentle radiator fan redistributes warmed air evenly, preventing temperature stratification and safeguarding humidity levels. It mimics natural environmental conditions, reducing manual adjustments and stress on developing embryos. The included color installation guide walks you through every step—no electrical expertise needed. This accessory ensures your incubator fan heater synergy works efficiently, protecting your hatch investment with reliable temperature control. Product Measurement Fan Dimensions: Approx. 60 × 60 × 25 mm Kit Weight: ~0.35 lb (160 g) Replacements Included: Custom fan plate for exact fit Wiring Length: Pre-wired cable tailored for incubator hookup Technical Details Specification Details Model Little Giant Fan Kit (9300 Series) Voltage 12 V DC (operates off incubator transformer) Fan Type Low‑noise, controlled-speed ventilation fan Compatibility 9300, 10300, 11300 still-air incubators Contents Fan, fan plate, wiring harness, installation guide Function Converts still-air unit to circulated-air incubator Noise Level Whisper-quiet—suitable for home or nursery use Additional Information Better Hatch Outcomes: Still-air incubators often see temperature variances of up to 5 °F, harming hatch rates. This kit ensures uniform airflow and temperature distribution Preferred Over DIY Kits: Unlike generic PC fans, this incubator fan is calibrated for safe airflow—no overheating or desiccation risks. Clear Assembly Steps: Includes full-color instructions and video tutorials for easy fan assembly Weatherproof Internals: Designed to operate reliably in humid incubator environments. Warranty & Support 2-Year IncuCare® Warranty: Backed by Incubator Warehouse's support program. Customer Assistance: Includes downloadable PDF and video installation guides. US-Based Support: Phone and email help available via Miller/Incubator Warehouse for setup, replacement needs, and warranty service. Customer Feedback: Users report easy fit, significant improvement in hatch rates, and quiet operation—though some highlight glue drying issues, now resolved in updated kits  Ideal For Anyone needing a reliable fan replacement or fan assembly kit for Little Giant incubators Farmers or hobbyists wanting a plug-and-play fan parts upgrade Users experienced in thermal inconsistencies seeking a precision ventilation fan accessory Those wanting enhanced control over their incubator fan heater setup

Product Features: Designed for Little Giant Incubators: Perfect fit for models 9300, 10300, and 11300. Transforms Your Incubator: Converts your Little Giant Still-Air Incubator into a Circulated-Air Incubator for improved hatch results. Prevents Harmful Hot & Cold Spots: Constant air circulation stabilizes temperature, reducing risks of overheating or chilling. Improves Temperature Stablity: This fan kit helps maintain optimal incubation conditions if your room temperature fluctuates frequently. Compact & Easy Installation: Comes with step-by-step installation instructions. Two-Year IncuCare Warranty. Product Description: Are you looking to improve the efficiency of your Little Giant Still-Air Incubator? The Circulated Air Fan Kit with Heater is an essential upgrade that transforms your incubator into a Circulated-Air Incubator, ensuring consistent temperature distribution and significantly enhancing hatch rates. Made for Little Giant incubator models 9300, 10300, and 11300, this fan kit is easy to install and removes dangerous hot and cold spots inside your incubator. Temperature fluctuations can be a major issue in a still-air incubator, with heat rising to the top and creating uneven temperature zones. At any given moment, the temperature inside the incubator can vary by up to 5°F, depending on the location. This inconsistency affects embryo development and hatch success. By installing the Little Giant Circulated Air Fan Kit, you create an environment where warm air is continuously distributed, ensuring a more stable and uniform temperature throughout the incubator. This maximizes hatch rates and reduces the risk of weak or undeveloped chicks. Product Specifications Dimensions: L 5.25” x W 4.875” x H 3.125” Power: Efficient, low-energy fan kit Compatible Models: Little Giant 9300, 10300, 11300 Includes: Fan, heater for egg incubator, Wiring, and Installation Guide Item Number: Miller 7300 This little giant incubator fan continuously circulates the air inside the incubator, eliminating temperature differences between the top, bottom, center, and corners. It removes hot and cold spots, so every egg gets the best conditions to hatch. A circulated air system is a must-have if you live in an area where room temperatures change frequently. Sudden drops or increases in temperature can negatively impact hatching success. This little giant incubator fan kit reduces the impact of external temperature changes by stabilizing the incubator's internal conditions. Most still-air incubators rely on a thermostat to cycle the heating unit on and off. However, when heat is not evenly distributed, the thermostat may turn off too soon or too late, leading to inaccurate temperature regulation. This fan kit evenly spreads heat throughout the incubator, helping the thermostat function more accurately and maintain the correct incubation temperature. Step-by-Step Installation Guide Setting up your 7300 forced air fan kit is simple. Follow these steps: Unplug Your Incubator – Always disconnect power before installation. Remove the Incubator Lid – Gently remove the lid to access the interior. Locate the Pre-Drilled Fan Holes – Align the forced air fan kit with the designated mounting area. Secure the Fan with Screws – Attach the fan to the Little Giant incubator securely. Connect Wiring – Use the wiring diagram to connect the fan and heater. Test the System – Turn on the incubator before placing eggs and ensure the fan runs smoothly. Installation Time: Approx. 5-10 minutes Tools Required: Screwdriver Don't let temperature fluctuations ruin your hatch rates. Click "Add to Cart" now & give your eggs the best chance to hatch.

IncuKit™ XL for Reptile Incubators All-in-one thermostat, heater, fan control unit For Mid-Size & Cabinet Incubators Digital electronic thermostat 125 Watt Heater/Fan Unit Integrated heater with safety thermal switch included Large high output axial fan with safety guard Mounting hardware & operating instructions included IncubatorWarehouse.com's 2 Year IncuCare Warranty The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!! More Information: SKU : IKXLR CONDITION :N ew Weight : 2.3 lb MODEL : IncuKit XL Reptile VOLTAGE : 110 Warranty & Support All IncuKit™ systems come with a 2-year warranty and expert USA-based support. Need help with installation? Our customer service team is happy to walk you through it.

Product Features: Voltage Conversion: Converts 220/240V power to 110V AC, making it suitable for international use. Continuous Use: Designed for continuous operation without wearing out. Rated for up to 100 Watts, it ensures your incubator runs smoothly even with constant use. Universal Compatibility: Specifically designed for Little Giant and HovaBator Egg Incubator Combo Kits, including incubator, fan kit, and egg turner. Convenient Outlet Tap: Includes an outlet tap that allows you to plug in both the incubator and egg turner at once, ensuring ease of use with one power source. Durability: Built to withstand prolonged use, unlike typical converters that are not built for constant power demands. Purchase includes our Two-Year IncuCare Warranty. Product Description: If you're hatching eggs with an incubator that requires 110V power, but you're located in a country with 220/240V outlets, you know the struggle of trying to get everything to work properly. Luckily, our 220/240V to 110v converter kit makes it simple to use your incubator anywhere in the world without worrying about power incompatibility. Why You Need the 220/240V Voltage Converter In many countries, electrical outlets provide a 220/240V power supply, which can be incompatible with standard 110V incubators. This is where the 220/240V voltage converter kit steps in. Whether you're a hobbyist or a professional in egg incubation, this converter kit provides the vital connection between your incubator and the local power supply, ensuring everything runs smoothly. This kit is designed specifically for incubators, such as the Little Giant or HovaBator models, and it can also be used with both the incubator power cord and the egg-turner power cord. The included outlet tap allows you to plug in the egg turner and incubator simultaneously, making it incredibly convenient for international users who need to manage multiple devices simultaneously. How It Works The power converter in this kit is the heart of the operation. It takes the 220/240V AC power from your local outlet and safely converts it to 110V AC, the power your incubator and egg turner need. The kit is designed to be used continuously, so you don't have to worry about breaking down during the long incubation cycles. This is a massive advantage over many other converters, which tend to wear out after being used for long periods. The 220/240V voltage converter kit is built to last, ensuring you can rely on it for the entire incubation process. Benefits: Easy Setup: The converter kit makes converting 220/240V power into a usable 110V power source simple, eliminating the need for complex installations or setup processes. Durability and Reliability: Designed for continuous use, the converter ensures that your incubator and accessories will function properly, providing years of reliable service. Compact and Convenient: The compact size and user-friendly design make it easy to store and use. Plus, the ability to power both the incubator and egg turner from a single unit makes it incredibly convenient. Why Choose the 220/240V Voltage Converter Kit? The 220/240V voltage converter kit is a must-have accessory for international incubator owners. It ensures that your equipment operates at peak performance, regardless of where you're located. Whether you're in Europe, Asia, Africa, or another part of the world that uses 220/240V power, this converter kit allows you to continue hatching eggs without any power interruptions. Moreover, the Two-Year IncuCare Warranty adds a layer of security, guaranteeing that if anything goes wrong, you're covered. It's a solid investment for anyone using incubators outside the United States or North America. Order Yours Today Stop worrying about power issues, and get this power converter today. It's the perfect solution for anyone using 110V incubators in countries with 220/240V outlets. Experience hassle-free incubation and enjoy the convenience of a well-powered incubator setup wherever you are in the world.  

Product Features: Precise Temperature Control: Fine-tune your incubator's temperature with a knob-controlled adjustment for better hatch rates. Wide Temperature Range: Adjustable from 80°F to 105°F, making it ideal for incubating chicken, duck, quail, and even reptile eggs. Easy DIY Installation: Comes with all necessary components and a wiring diagram, making it a straightforward setup even for first-time users. AC & DC Compatibility: Works seamlessly with AC and DC power sources, offering versatility for different incubator setups. 15A Rating for Reliable Performance: Handles up to 1800W of power, ensuring stable and consistent temperature control. Complete Installation Kit: Includes all essential components: thermostat, control knob, set screw, lead wires with insulated connectors, mounting screw nut, and a mini screwdriver for effortless setup. Perfect for Homemade & Commercial Incubators: This kit is universally compatible whether you're building a DIY incubator or upgrading a store-bought model. Includes 2-Year IncuCare Warranty. Product Description: Maintaining the perfect temperature is key to hatching eggs successfully. This bi-metal egg incubator thermostat kit is a high-quality mechanical thermostat designed to provide accurate and reliable temperature control for incubators. Whether you're a backyard poultry farmer or a professional breeder, this kit ensures a stable environment for your eggs, improving hatch rates and reducing temperature fluctuations. Unlike digital thermostats, which can sometimes experience sensor malfunctions, a bi-metal thermostat relies on thermal expansion, making it a reliable, fail-safe option. The thermostat automatically regulates the heat source by expanding and contracting its metal components in response to temperature changes. This allows for precise temperature maintenance, ensuring your eggs remain in the optimal hatching range. What's Included in the Kit? Thermostat Unit: Long 1.5" shaft designed to fit through thick styrofoam incubator walls. Control Knob with Set Screw: Allows for easy and precise temperature adjustments. Mini Screwdriver & Nut: Ensures the thermostat is securely fastened to your incubator. Lead Wires with Insulated Connectors: Ensures safe, efficient electrical connections. Wiring Diagram: Helps integrate the thermostat with a fan and heater, ensuring even heat distribution. This Sammax-style thermostat is engineered to maintain an accurate temperature range between 80-105°F (27 and 40°C), ensuring optimal egg incubation conditions. The bi-metal mechanism provides reliable temperature stability, reducing the risk of overheating or underheating your eggs. This helps create the best conditions for a higher hatch rate. This mechanical incubator thermostat is designed to function with both AC and DC power sources, making it a versatile choice for various incubator setups. Whether you're using a 120V AC home power supply or a DC-powered system in an off-grid setting, this thermostat adapts to your needs. Technical Specifications Brand: Incubator Warehouse Material: Metal Control Type: Knob Temperature Range: 80°F - 105°F Power Handling: 15A (up to 1800W) Compatible Power Sources: AC or DC Shaft Length: 1.5 inches Weight: 8 ounces (0.5 lbs) With a 15-amp rating, this thermostat can easily handle heating elements up to 1800 watts. It works for both small DIY and large commercial incubators. Its robust power capacity ensures efficient heating control without the risk of overload. Step-by-Step Installation Guide Mount the Thermostat: Insert the 1.5-inch shaft through your incubator's wall and secure it with the included mounting screw nut. Connect the Lead Wires: Follow the included wiring diagram to attach the provided insulated lead wires to your incubator's heater and fan. Install the Control Knob: Secure the control knob onto the thermostat shaft using the included set screw. Power On & Adjust: Turn the control knob to set the desired temperature within the 80-105°F range. Monitor & Fine-Tune: Use a thermometer or digital hygrometer to double-check temperature accuracy and adjust if needed. Pro Tip: If you're using a fan-assisted incubator, place the thermostat near the airflow to ensure even heat distribution across all eggs. Important Note: This thermostat is an electrically powered device, so safety precautions are essential. Always disconnect power before handling electrical connections. Use a protective screen to prevent direct contact with heated elements or exposed wires. Secure all connections to prevent electrical failures or temperature inconsistencies. Keep incubators in a stable environment to avoid extreme temperature fluctuations. By following these safety guidelines, you can ensure a smooth and successful incubation process with zero risks. Order now & take control of your incubator's temperature.  

Fan for the Newer Style Nurture Right 360 (Your incubator must look exactly like the one in the picture for this to be compatible). Easy installation with only a standard Phillips head screw driver. Get your NurtureRight 360 running again!

Replace your worn-out fan with this high-quality cooling fan for HumidiKit. It ensures your humidifier continues to work efficiently, providing optimal airflow and performance. Perfect for quick and easy installation. Product Description: Keep your HumidiKit running smoothly with this reliable cooling fan. Designed to replace old or damaged fans, this part ensures efficient airflow for your device. Whether you need a cooler fan or a blower cooling fan, this replacement fan fits perfectly. Don’t let a broken fan slow you down. Get back to enjoying fresh, clean air today with this fan for HumidiKit. Product Features: Compatible with HumidiKit models Efficient cooling fan replacement Quick and easy installation Durable design for long-lasting use Helps maintain the optimal performance of your humidifier Works as a blower cooling fan for powerful airflow Technical Details: Type: Cooling Fan Compatibility: Designed for HumidiKit models Power: Low energy consumption for efficient performance Material: Durable and long-lasting components Size: Perfect fit for HumidiKit devices Installation: Quick and simple setup with no tools required Why Should You Grab It? If your HumidiKit isn't working like it used to, this replacement fan for HumidiKit is precisely what you need. It restores airflow, keeps your device running smoothly, and helps you enjoy clean, fresh air without interruptions. With its easy installation and long-lasting design, this fan is a wise choice. Don’t wait for your humidifier to lose power—buy it now and get back to enjoying the benefits of your HumidiKit! Get Yours Today: Order now to bring your HumidiKit back to life! Ensure it runs smoothly with this reliable replacement fan. Click here to shop now!  

This replacement fan is compatible with the Maticoopx 30 egg incubator. Easy installation with only a standard Phillips head screwdriver. Get your Maticoopx running again!