Product Features:
-
125-Watt Heater: Keeps your incubator at a steady, perfect temperature with reliable heat and low energy use.
-
High-Power Air Circulation Fan: Ensures heat flows evenly throughout the incubator for consistent results.
-
110V AC Power: Simple plug-in to any standard U.S. outlet for quick and easy use.
-
Convenient Power Supply: Use 110V AC power, or opt for the 220V international version based on location.
-
Made for IncuKit™ XL: Designed to fit and work perfectly with your IncuKit™ XL (Basic or Advanced Thermostat), ensuring easy installation and smooth performance.
Product Description:
Looking to keep your IncuKit™ XL running at its best? This fan and heater combo unit is just what you need. It combines a 125-watt heater with a powerful circulated air fan to help maintain the perfect conditions inside your incubator.
The 125-watt heater is built to provide steady, even heat, ensuring that your incubator stays at the right temperature all the time. It keeps the heat consistent and helps avoid any sudden temperature changes. It quickly warms up and prevents overheating, making it a reliable addition to your setup.
The high-power circulated air fan keeps the air moving throughout your incubator. By circulating the air, it helps prevent hot spots and keeps the temperature even across all areas. This fan also operates quietly, so it won't disturb your environment while continuously maintaining airflow.
This unit is made to fit perfectly with your IncuKit™ XL, and it's super easy to install. It runs on 110V AC power, so it's perfect for most standard outlets. If you're located outside the U.S., no worries. There's also a 220V international version available to make sure it works for you wherever you are.
This fan and heater combo is ready for continuous use. It's durable, efficient, and designed to keep your incubator running smoothly. Plus, it's easy to maintain, so you can focus more on your incubation projects and less on managing your equipment.
Add this fan and heater combo today and ensure optimal temperature and airflow for your incubation projects. Order now and experience the perfect balance of heat and circulation for better, more consistent results.
QUESTIONS & ANSWERS
Ask a Question-
Will this heater and fan work for a brooder box?
Yes, it can work for a brooder box. It will provide heat and air circulation. If purchased with the IncuStat Basic then you can set the temperature to any temperature you want. It is important to ensure you have the correct amount of heat and insulation. You do not want the heater to run constantly. If it overheats it has a thermal fuse that will cut power to the heater.
-
Regarding the incukit xl heater: which wires do what? I would like to use it for a homemade incubator that already has a temp controller. What kind of power supply does the heater and fan need? 110 volt?
There are four wires for this unit. The ones coming from the heating element are typcially red and blue. The ones for the fan are typcially both brown. Both the heating element and fan operate on 110v power.
-
Does the hot air flow through the fan?
The fan actually blows up and over the heating element.
-
What is the physical size of this?
The size of this heater/fan unit is (5 1/2" x 5 1/2" x 2 3/4").
-
How do I determine what wattage of heating element I will need for my incubator?
One of the simplest ways to determine what size of heating element you need in an incubator is what we call the light bulb test. To perform this test, you simply place a light bulb(s) in the incubator with the approximate wattage that you think will work. If this heats the incubator to or a little above the desired set temperature approximately the same wattage of heating element will also work. If it goes over by a lot than you will want a lower wattage heating element. If it takes a long time to heat up or never reaches the desired temp you will need a larger heating element.
-
What size of an incubator will the IncuKit heat?
There is not a predetermined size that the IncuKit will work for. This is because each incubator is built different and it is impossible to know which IncuKit will work for each design. There are several factors that will affect which IncuKit you will need to consider. A couple of these are the size, dimensions, and insulation. A good general rule of thumb for each size IncuKit is:
IncuKit Mini- Table top size incubators like a HovaBator or Little Giant
IncuKit XL With 1 x Heater/Fan – Approximately an incubator the size of an apartment refrigerator
IncuKit XL With 2 x Heater/Fans – Approximately the size of a GQF Sportsman Cabinet incubator
Before selecting an IncuKit we recommend performing a light bulb test to determine what wattage of heating element you will need. Click here to learn about the light bulb test.
Product Instructions & Documents