DIY Incubator Parts & Kits

The two biggest factors in achieving a successful hatch are correct temperature and humidity. With these factors in mind, we created the IncuTherm™ series digital thermometer/hygrometers. The IncuTherm Plus™ is able to accurately measure and display the temperature and relative humidity at the same time which can be displayed in both Fahrenheit or Celsius . The probe is placed inside the incubator. This allows the IncuTherm Plus™ to measure temperature and humidity on the inside of your incubator and display it on the outside. The built-in high and low memory stores the highest and lowest temperature and humidity readings since the last memory reset. This helps you ensure ideal conditions for a successful hatch. The IncuTherm Series has been factory calibrated to be accurate to within +/- 1°F (0.5°C) in the incubation temperature ranges. This is twice as accurate as most standard digital thermometers available on the market. This accuracy level makes the IncuTherm Series the easy choice when selecting a digital thermometer for your next hatch. As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the IncuTherm Plus™ Hatch Monitor for yourself.

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating, and storing eggs. At time of setting eggs, just remove loaded egg tray from storage area and place it on the incubator turning rack. The GQF No. 1500 and 1502 incubators are equipped with turning racks that will accomodate plastic trays to hold your eggs in place. Holds any size egg from bantam, to pheasant, to medium chicken egg. Each of the No. 1502 turning racks will hold 2 universal egg trays (90 eggs) for a total of 270 eggs per incubator. (Not Stackable in GQF incubators). SET OF 6 TRAYS. COLOR MAY VARY. Please note: color may vary.  

Product Features:   Precise Humidity Regulation: Automatically controls humidity for ideal conditions. Digital Programmable Hygrostat: Customizable settings for consistent performance. Instant Humidity Delivery: Ensures optimal air moisture levels immediately. Enhanced Air Circulation: Provides fresh, clean air for eggs. Convenient 1-Liter Capacity: Designed for distilled water; lasts up to a week in tabletop incubators. Effortless Installation: Quick and easy setup. Expandable Reach: Tubing extends up to 30 inches for versatile use. Broad Compatibility: Works seamlessly with most incubators. Trusted Durability: Backed by a two-year IncuCare Warranty.   Product Description:   Managing the right humidity in your incubator is crucial for successful egg hatching. The HumidiKit™ is an advanced automatic humidity control system specifically designed for egg incubators. Equipped with a programmable digital hygrostat, this system ensures accurate humidity control and allows you to adjust settings to achieve the perfect environment for your eggs, improving your hatch rates. With its 1-liter capacity, the HumidiKit™ delivers instant humidity while circulating fresh air inside the incubator, ensuring optimal conditions. In tabletop incubators, this system typically requires a weekly refill, making it a low-maintenance solution. Installation is easy and seamless with expandable tubing that connects to any ½” vent hole for flexible placement. The HumidiKit™ offers the perfect combination of convenience and precision, ensuring your eggs receive the best possible environment. Its automatic humidity control eliminates the need for constant monitoring, while the digital hygrostat makes it easy to set the ideal humidity levels. With weekly refills and easy installation, this system is a low-maintenance solution for anyone serious about egg incubation. 

Fits Egg Turner Models 6300, 6200, 3200, 1610,1611,1612 & 1614 OR for use in home-built Egg Turner. For use with Farm Innovators, GQF Hova-Bator & Miller Manufacturing Little Giant Automatic Egg Turners. Replacement motor with cord for all Automatic Turners (6300, 6200, 3200, 1610, 1611, 1612 & 1614). 110V AC 

Putting a fan inside your incubator is a great way to increase hatch rates, but it is not just as simple as buying a PC fan or a cheap fan kit. There are a few things that you need to keep in mind: Too much air circulation is BAD for eggs (it will dry them out). Think about it, in nature there isn't a fan blowing on eggs. The only reason that an incubator needs the fan is to keep the temperature more consistent (like in nature). BEWARE of CHEAP kits. They often use regular HIGH speed fans. Almost all the fans on the market are designed to move as much air as possible. This is not what you want. If you get too powerful of a fan it can OVERHEAT your incubator. Fans generate heat. Many people have come to check on their eggs only to find them cooked because the fan caused the incubator to overheat. The direction the air flows and the positioning of the fan inside your incubator is critical to maintaining a consistent temperature throughout the incubator. Highlights of the Incubator Warehouse Circulated Air Fan Kit for the Little Giant 9300 Tested & proven for the Little Giant Incubator to increase hatch rates Specially designed to move only as much air as necessary to keep the incubator temperature consistent Will not overheat your incubator!!! Full color installation instructions for an easy installation Backed by the Incubator Warehouse TWO YEAR HASSLE FREE GUARANTEE Did you know that at any given time the temperature in your Little Giant still air incubator can vary by up to 5 degrees from the top and bottom and from the center to the corners? In addition, you get variation from the thermostat cycling the heating unit on and off. This temperature variation has a significant impact on your hatch rates. This problem can be significantly reduced by installing a circulated air fan kit into you incubator. Heat naturally rises, so you need to circulate the hot air from the hot spots to the cool spots for a much more uniform and consistent temperature and better hatch results. The more consistent air temperature also ensures that your thermostat is cycling on and off at the appropriate times, not just when the air around the thermostat heats or cools. Installation Video: 9300 Fan Installation Guide

Purchase is for Egg Turner ONLY, incubator base not included. The IncuTurn™ for HovaBator has been carefully engineered and tested and will fit all current HovaBator desktop incubators**.  The universal egg tray holds any size egg, saving you from purchasing expensive egg racks for different egg sizes.  The automatic egg turner gently rolls the eggs six times per day, which prevents the yolk from settling while exercising the embryo.  This rolling action is very similar to how eggs are turned in nature.  The universal egg tray can hold 42 Chicken*, 70 Quail*,  or 28 Goose eggs*.  Installing the IncuTurn™ for HovaBator is a breeze, simply slide the motor clip over the edge of the incubator and attach the turning tray and you’re ready to start incubating.  This product is a direct replacement for all HovaBator Egg Turners (including models 1611 & 1610).  110V AC Power. As always, all of our products are covered by our Two-year Hassle-free IncuCare Warranty. Purchase today with no worries and experience the IncuTurn™ for HovaBator for yourself. *Capacity may vary based on egg size **Works with all current style HovaBator Incubators, does not work with the older blocky, square style incubatorsHOVABATOR QUAIL EGG RACKS (6) are not compatible with the IncuTurn Egg Turner  

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating, and storing eggs. At time of setting eggs, just remove loaded egg tray from storage area and place it on the incubator turning rack. The GQF No. 1500 and 1502 incubators are equipped with turning racks that will accomodate plastic trays to hold your eggs in place. Each No. 1502 turning rack will hold 4 quail egg trays (456 quail eggs). Molded posts on each tray permit double stacking for a total of 1368 quail eggs. (Caution: GQF HATCHING trays hold a maximum of 250 quail eggs). Outer edge positions of double stacked trays may not be used in top turning rack. SET OF 6 TRAYS. COLOR MAY VARY.

INCUBATORWAREHOUSE.COM's FLEW WATT heat tape clips and insulators These are especially designed for use with Flex Watt heat tape. Flex Watt is dependable, cost effectiveness and easy to use! Each set comes with everything you need to make the electrical connections between a power cord or dimmer and your flex watt heat tape. The tape is a special ultra thick self-fusing tape that creates an almost permanent bond. Please note the price is PER SET of two clips and insulators for each (everything you see in the picture). Feel free to take a moment or two to review our feedback so you can buy with complete confidence. Check out our ebay store for additional items for your animal heating and egg-hatching needs. Simply click here: https://stores.ebay.com/Incubator-Warehouse Please feel free to email us with any questions.

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating, and storing eggs. At the time of setting eggs, just remove the loaded egg tray from the storage area and place it on the incubator turning rack. The GQF No. 1500 and 1502 incubators are equipped with turning racks that will accommodate plastic trays to hold your eggs in place. Holds extra large eggs (Turkey, Duck, Jumbo Chicken, etc.). Each of the GQF No. 1502 turning racks will hold 2 extra large egg trays (54 eggs) for a total of 162 eggs per incubator. One tray per setting rack must be trimmed to fit GQF incubators. SET OF 6 TRAYS. COLOR MAY VARY.

Replacement for the Little Giant 9300, 10300, & 11300 Controller and Sensors. A digital electronic thermostat with temperature and humidity readout is easily adjustable with its LCD screen. Also included a new set of sensors for the controller.

4" Butterfly Vent for Cabinet Incubator (5" total diameter). Metal.

This listing is for brand new 225 watt replacement heater coil for cabinet style egg incubators. Wire heats and cools quickly, minimizing overheating, making this an ideal choice for larger egg incubators 225 watts of power Voltage requirement: 110/120VAC Click here to see the 220V International Version. This is a substitute for GQF Part # 3014 - 225 watt coil heater in cabinet style incubators

Fan Heater Combo Unit for the IncuKit™ XL. 125 Watt Heater and High Power Circulated Air Fan.  110V AC Power Click here to see the 220V International Version.

An accessory for all model Hova-Bators produced after January 1998. Makes incubator bases last longer. Removable for easy cleaning.

This Hygrometer works great for measuring humidity in any incubator. The humidity gauge displays the humidity in the air as a percentage. This hygrometer is also a replacement for the hygrometer in the No. 1140 Incubator Warehouse IncuView Incubator Lid (Current model only - Does not replace the old dial hygrometer).

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating and storing of eggs. At time of setting eggs, just remove loaded egg tray from storage area and place it on the incubator turning rack. The No. 1500 and 1502 incubators are equipped with turning racks that will accomodate plastic trays to hold your eggs in place. Each No. 1502 turning rack will hold 2 pheasant egg trays (118 pheasant eggs) for a total of 354 eggs per incubator. (Not Stackable in GQF incubators). SET OF 6 TRAYS. COLOR MAY VARY.

This fan is made with durable ball bearings for long life. Mounting holes on each corner make mounting in your incubator very easy. Just wire into your incubator so the fan is always on to keep your cabinet incubator temperature uniform. We also sell a 220V version for international use. 110V AC, 80-105 CFM, 0.25 Amps, 22 Watts Purchase includes Two Year IncuCare Warranty.

Styrofoam Case for Little Giant 9300, 10300, & 11300 Incubator. Case only, windows and electronics not included.

Set of 2 clear plastic windows for Little Giant 9300 Incubator

Mesh floor for Little Giant Incubator.

This motor is a 5 RPM 12V DC motor for the IncuKit DC. Use this motor to make your own egg turner. The IncuKit DC allows you to set an interval so the motor will turn on for a few seconds every few hours (Customize to your own turning needs)

The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  

This Egg Turner Motor is perfect for cabinet egg incubator applications, providing very high torque (60 lbs/in) it can easily turn a variety of egg turner designs. The motor is 1 RPM (makes 1 revolution per minute), so it is best used with a timer to prevent overturning your eggs. This motor works great with the IncuKit XL Advanced because they have built-in egg turner timer controls.  The motor shaft has a D shape and also a hole through the shaft for easy egg turner linkage.  110V AC Power.

  Incubator Warehouse's Digital Electronic Egg Incubator Thermostat for IncuKit XL Description: This thermostat is very simple to use. Just press the up arrow to set the temperature (in 0.1 degree increments). There is a flame indicator on the screen that shows when the heater is operating. The unit has an 18 inch remote sensor that is placed inside the incubator. The white thermostat case is then mounted on the outside of the incubator. Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) 110V AC Power Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7. NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should. As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine! This is true with any incubator and egg configuration. Calibration Enabled. This means that you can calibrate the thermostat to a specific temperature. For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds).  

In our opinion this thermometer should only be used by those that are familiar with Wet Bulb thermometers.  According to GQF This is the most accurate incubator thermometer available and has approximately a 4' stem which can be inserted in a 5/32' hole to permit reading of temperature from outside of incubator. The 2' dial permits easy and accurate reading of temperature and is graduated in one degree increments from 25 degrees to 125 degrees.  Wicks are attached and placed in the humidity pan to allow thermometer to read wet bulb temperatures. THIS THERMOMETER SHOULD BE USED IN CIRCULATED INCUBATORS ONLY.

This listing is for brand new battery connector set for the Genesis 1588 and the IncuKit Mini / IncuView. This connector allows you to power your incubator with a battery.NOTE: Please select the type of connector you need from the drop-down menu The alligator style clips will easily connect to the positive and negative terminals on your 12VDC battery The barrel connector ends plugs into the power wire of the Genesis 1588 or the power port of the IncuKit DC / IncuView This is great for a back-up power supply for those who may have frequent power outages A 12VDC battery can be your primary power source for those who are off the grid Would you like to see how this is used with the Genesis 1588 and IncuKit DC / IncuView? See this short video:

Many people prefer to build their own incubators. This is a fun do-it-yourself project. We’ve found that the biggest difficulty people run into while developing their incubators is finding a reliable heat source and thermostat. We’ve solved this problem by creating the IncuKit™ series thermostat fan heaters. We have created the IncuKit™ MINI to turn any small container into an incubator. This provides the heat, air circulation, and thermostat control you need to accurately control the environment in your container for hatching eggs. The IncuKit™ MINI has a proportional thermostat, built-in 60-watt heater, and fan. The proportional thermostat controls the amount of power that is supplied to the heater instead of simply turning the heater off and on. This provides more accurate temperature control than a standard off/on thermostat. The thermostat also comes preset to 99.5 degrees F which can be easily adjusted if necessary. The digital display makes it easy to read the current temperature and to make changes. The IncuKit™ MINI operates on low 12 Volt DC power and includes an AC-to-DC converter that works with both 110/120v and 220/240v power input. In case of power outages, the IncuKit™ MINI can also be powered with a 12V battery (additional battery connectors required). NOTE: You can optionally purchase the car power adapter or battery clips so you can keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. As always, all of our products are covered by our 2-Year IncuCare Warranty. Purchase today with no worries and experience the IncuKit™ MINI for yourself. How to determine the appropriate size container for the IncuKit MINI: There are several factors that determine how much power will be required to heat your container up to the appropriate temperature to hatch eggs. The size of the container, how well it is insulated, the room temperature, and how much the room temperature fluctuates will all have a significant impact. The best way to determine if the IncuKit™ MINI is the right size for your container is pretty simple. Just put a 60-watt light bulb in your container (ensure it is thermally insulated since they get pretty hot!) and measure how warm your container gets. If it easily gets to at least 100 degrees F, then the IncuKit™ MINI should work. It is the user’s responsibility to determine if this product will generate enough heat for your container.    

Hova-Bator must have been produced after August 2004 to accept this bottom half. May have slight discoloration or dings/dents.

Purchase is for Quail Tray ONLY, Motor and mount not included. The Quail Tray for the IncuTurn™ for HovaBator has been carefully engineered and tested and will fit all current HovaBator desktop incubators**. The Quail egg tray holds quail and small bird eggs and increases egg capacity to 116 quail eggs* verses the 70 quail eggs* that the universal tray can hold . As always, all of our products are covered by our Two-year Hassle-free IncuCare Warranty. Purchase today with no worries and up-grade your IncuTurn™ for HovaBator to fit more small eggs. *Capacity may vary based on egg size **Works with all current style HovaBator Incubators, does not work with the older blocky, square style incubators The IncuTurn™ for HovaBator is not included. Quail Tray only.

This dimmer switch works perfectly with Wonder Watt heat tape. This allows you to control the amount of power that goes into Wonder Watt and as a result, controls the temperature. Total length of the cord is 5 feet. Works for 110 Volt (100 watts MAX) & 220/240V (200 Watts MAX) PowerWonder Watt is a great way to heat many applications. Some examples include: Egg incubatorsReptile cagesReptile warm spotsDog housesPipesSeed germination mats Plant startsSatellite discsDesk warmerKeyboard warmerFoot warmer ...and just about anything else you can think of that you would want to warm up. This dimmer switch allows you to regulate how much power goes to the Wonder Watt heat tape so you can increase or decrease the temperataue. It can also help ensure you don't overheat the tape. Very simple to use, just plug the cord from your heat tape into the dimmer plug and then the dimmer plug into the wall. That's it! The knob turns to let you regulate how much power goes in.Let us know if you have any questions.Wondering how to configure Wonder Watt? Please see these three instructional videos. The dimmer in this listing replaces the turn-style dimmer in these videos. After you attach it to your Flex Watt, it requires NO additional wiring, just plug it in! Video #1: Shows how to attach the clips insulators. Video #2: Shows how to splice in the dimmer. Video #3: Shows how to mount Flex Watt using foil tape.

This is a Brand New Sammax style thermostat that works GREAT in an incubator!  Included with purchase: Thermostat with a temperature range of 80-105 F (Long 1.5" shaft can go through thick styrofoam walls)  Control Knob with set screw and mini screwdriver Lead wires with insulated connectors for thermostat Screw nut that screws onto the thermostat shaft to help attach to a surface or panel 15A rating Can be used with either AC or DC applications Comes with a wiring diagram for wiring in a fan and a heater Caution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protective screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!

25 Watt Heating Element for Hova-Bator Egg Incubator.  For replacement or can be used in DIY egg incubator. 110V AC Power. Clips not included see, available as an separate item.

This is a printed version of our 4 Part of our Intro to Hatching YouTube Series (see video links below) Illustrated Guide to Hatching Basic introduction to incubating eggs and brooding chicks Product has references to our products but is overall very educational and informational 28 Pages See Pictures for a sneak peak YouTube Video Series Intro to Hatching Part 1/4: Setup https://www.youtube.com/watch?v=MqnbL8qTvaI&t Intro to Hatching Part 2/4: Incubation Period https://www.youtube.com/watch?v=vq8NvC2mH0U&t Intro to Hatching Part 3/4: Hatching Period https://www.youtube.com/watch?v=e3JzvNvvRpU&t Intro to Hatching Part 4/4: After Hatch https://www.youtube.com/watch?v=L7gtp3QQWgY&t

This is a Brand New Sammax style thermostat that works GREAT in an incubator! Included with purchase:    * Thermostat with a temperature range of 80-115 F (Long 1.5" shaft can go through thick styrofoam walls)    * Screw nut that screws onto the thermostat shaft to help attach to a surface or panel    * 15A rating    * Can be used with either AC or DC applications    * Comes with a wiring diagram for wiring in a fan and a heaterCaution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protecting screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!

This extension adapts the IncuKit XL to work for larger reptile incubators. Without this adapter, the fan stays on constantly. This adapts the wiring so that the fan and heater turn off once the set temperature is reached. This helps to keep the incubator from overheating when the set temperature is close to the room temperature. And it keeps the air from circulating too much, which would tend to dry the eggs out.

The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.     

Top Only / New Style Hova-Bator.  Direct replacement for Model 1602N & other similar models  

This kit includes all the metal parts to assemble an entire cabinet turner assembly (3 Shelf) for a DIY incubator OR replacement for GQF cabinets (1500, 1502, or 1202E). TURNER MOTOR NOT INCLUDED (Sold Separately - SKU 3175 - Turner Motor Assembly). This turner fits egg racks 1243 (Quail), 1245 (Pheasant), 1246 (Chicken), 1248 (Goose/Turkey), & 1454 (Ostrich/Emu). Screws/ Bolts to attach to cabinet incubator walls NOT included, but all hardware to attach pieces together is included.