Search results for "Fan":

The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.     

Product Features: Seamless Compatibility: Designed specifically for the HovaBator 1588 Genesis incubator. OEM Manufacturer Quality: A trusted replacement part for reliable incubation. Digital Temperature Control: Provides accurate, stable heat for optimal hatching conditions. Easy Installation: Quickly replace your old thermostat and restore precise temperature control. Reliable Performance: Keeps your incubator running smoothly for consistent hatching success. Thermostat Only: This purchase does not include the fan or heater, so check if you need those separately. Includes 2-year IncuCare Warranty.  Product Description: If you own a HovaBator Genesis 1588 Egg Incubator, maintaining a stable and precise temperature is essential for successful hatching. Over time, incubator components can wear out, leading to inconsistencies in temperature control. When that happens, replacing the old thermostat is one of the best ways to restore your incubator's functionality without purchasing an entirely new unit. This digital thermostat replacement is an OEM (Original Equipment Manufacturer) part designed to fit seamlessly into your existing incubator. With its digital control center, this thermostat ensures the temperature remains steady, creating the right conditions for hatching eggs. Product Specifications Compatible With: HovaBator Genesis 1588 Incubator Type: Digital Thermostat Replacement OEM Replacement Part: Yes Installation: Easy, plug-and-play design Warranty: 2-Year IncuCare Warranty from Incubator Warehouse Includes: Thermostat Only (Fan and Heater Not Included) When Should You Replace Your Thermostat? If you're experiencing any of the following issues, it may be time to replace your incubator thermostat: Inconsistent Temperature Readings: If your incubator's temperature fluctuates or fails to maintain the desired settings, the thermostat could be the issue. A faulty thermostat can lead to poor hatch rates, making timely replacement crucial. Unit Not Heating Properly: If your incubator is running too cold or too hot, the thermostat may not be functioning correctly even after adjusting settings. Display Malfunctions: If your digital control center is unresponsive, displaying incorrect readings, or failing to power on, replacing the thermostat can often resolve these issues. Age & Wear: Components naturally degrade over time if you've been using your incubator for an extended period. Proactively replacing the thermostat can help prevent failures during critical incubation periods. Why You Need a High-Quality Thermostat for Your HovaBator 1588 Genesis The HovaBator Genesis 1588 is one of the most popular and reliable egg incubators on the market, but even the best equipment needs maintenance and occasional part replacements. A malfunctioning thermostat can lead to temperature spikes or drops, jeopardizing the health and viability of your eggs. Here's why a properly functioning thermostat is essential for your incubator: Prevents overheating or underheating, which can negatively impact embryo development. Ensures steady temperatures throughout the incubation period. Reduces stress on eggs, improving the chances of a successful hatch. Improves incubation efficiency, leading to better hatch rates. With this replacement thermostat, you can restore your HovaBator 1588 Genesis incubator to its original performance and confidently hatch eggs.   How to Install the HovaBator 1588 Replacement Thermostat Replacing your thermostat is quick and easy. Follow these simple steps: Turn off and unplug your incubator before starting any installation. Remove the old thermostat by carefully disconnecting it from the control center. Attach the new thermostat, ensuring all connections are secure. Test the temperature control before placing eggs inside the incubator. Monitor the temperature for stability before beginning a new incubation cycle. Important Notes: This listing is for the thermostat only; it does not include the fan or heater. Ensure compatibility with your HovaBator 1588 Genesis incubator before purchasing. Installation is straightforward, but our support team is ready to help if you need assistance. Don't let a faulty thermostat ruin your incubation process. Upgrade to a brand-new HovaBator Genesis 1588 Replacement Thermostat today and experience reliable, stable temperature control once again. Click "Add to Cart" Now & Ensure a Successful Hatch.

This is a Brand New Sammax style thermostat that works GREAT in an incubator!  Included with purchase: Thermostat with a temperature range of 80-105 F (Long 1.5" shaft can go through thick styrofoam walls)  Control Knob with set screw and mini screwdriver Lead wires with insulated connectors for thermostat Screw nut that screws onto the thermostat shaft to help attach to a surface or panel 15A rating Can be used with either AC or DC applications Comes with a wiring diagram for wiring in a fan and a heater Caution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protective screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!

Product Features:  HovaBator 2370 Digital Incubator: A high-quality incubator with a bright digital thermostat display for accurate temperature readings. Reptile Hatching Medium/Substrate: A specially designed medium that ensures the right balance of moisture and stability for the eggs. Substrate Cups: 4 transparent cups with lids to hold the hatching medium and eggs. Hatching Grid & Accessories: Designed to ensure airflow and proper moisture retention. 2-Year IncuCare Warranty: Our worry-free guarantee ensures your investment is protected. Product Descriptions: If you're looking for a reliable and easy-to-use solution for incubating reptile eggs, the HovaBator 2370 Digital Reptile Egg Incubator Kit is exactly what you need. This kit has everything required to ensure successful hatching. From a high-quality digital incubator to specialized substrate and containers, it's a complete package that simplifies the entire process. At the heart of this incubator is a digital thermostat that's accurate, and user-friendly. The bright LED screen displays the temperature, and the simple button controls let you adjust settings effortlessly. No more worrying about temperature fluctuations. This incubator maintains stable conditions throughout the incubation process, which is critical for developing reptile eggs. One standout feature of the HovaBator 2370 is its adjustable fan. Unlike traditional incubators, this fan can be turned off, which is especially important for reptile eggs that thrive in environments with little to no air movement. The incubator creates a stable and species-appropriate environment by giving you control over air circulation. This flexibility is a game-changer for breeders who work with a variety of reptiles.   Why Choose This Reptile Kit Easy to Use: Whether you're a first-time breeder or a pro, the incubator's intuitive design and clear instructions make it simple to operate. Versatile: It is ideal for all kinds of reptiles, including snakes, lizards, turtles, geckos, and more. Precise and Reliable: The digital thermostat ensures the perfect temperature for optimal hatching conditions. Customizable Airflow: The adjustable fan gives you full control over the internal environment. Complete Kit: Everything you need is included, making it a convenient, no-stress option. The included hatching substrate is a game-changer. It's designed to maintain the right level of humidity and stability, which is crucial for successful hatching. Four cups provide easy organization and management of multiple eggs, keeping them safe and separated. Whether you're raising snakes, turtles, geckos, or any other reptile, the HovaBator 2370 has you covered. Its adjustable settings and versatile design mean you can tailor the environment to fit the needs of different species. For professionals, it's a reliable workhorse, and for beginners, it's an easy-to-learn tool that will give you the confidence to start your breeding journey. Don't miss out; order yours now and give your reptile eggs the care they deserve.

Product Features:   Accurate Electronic Thermostat: Delivers precise temperature control for optimal incubation. Circulated Air Incubator: Circulated air technology ensures uniform heating throughout the incubator. Durable Styrofoam Insulation: Provides excellent heat retention for energy-efficient performance. Digital Display: Bright, easy-to-read display that shows temperature in Celsius or Fahrenheit. Washable Plastic Liner: Sanitary and easy-to-clean design for hassle-free maintenance. Humidity Control: Built-in water channels allow for precise humidity regulation. Product Description: Experience precision and ease with the Electronic Thermostat Hova-Bator Incubator. This advanced incubator is designed for poultry and reptile enthusiasts alike and delivers exceptional accuracy and versatility. It features a bright, easy-to-read display and supports temperature adjustment between Fahrenheit and Celsius for your convenience. With its circulated air system and optional fan shut-off for reptile egg incubation, it’s tailored to meet diverse needs. This incubator includes dual 4x6-inch viewing windows, allowing you to monitor the incubation process without disturbing the eggs. High side walls provide safety by keeping birds inside when the lid is removed. Crafted for efficiency, it offers capacity for approximately (Without an egg turner): 46 chicken eggs 188 quail eggs 90 pheasant eggs 40 turkey or duck eggs Enhance Your Hatch Rates: Maximize your success with optional accessories (sold separately): Automatic Egg Turner: Save time and ensure even incubation. Incu-Bright Egg Candler: Quickly check egg development. IncuTherm Plus™: Keep track of temperature and humidity levels for ideal incubation conditions. Built to Last: Energy Efficient: Operates on 110 Volt AC, consuming just 30 watts. One-Year Hassle-Free Guarantee: Shop confidently, knowing our reliable warranty backs you. Order today and experience the superior performance of the Hova-Bator incubator, trusted by enthusiasts worldwide. Whether you’re hatching chickens, reptiles, or exotic birds, this incubator is designed to deliver exceptional results every time.

PLEASE ALLOW 2 BUSINESS DAYS FOR YOUR ACCUHATCH PRO ORDER TO SHIP Product Features: All-in-One Functionality: Combines an egg incubator and hatcher into a single machine for greater efficiency. Universal Egg Turners: Adjustable to accommodate various sizes, from quail eggs to chicken eggs and goose eggs. Automatic Humidity Control: Comes with a humidifier and automatic water refill system for precise humidity management. High Capacity: Hatch up to 600 quail eggs, 280 chicken eggs, or 160 goose eggs at a time. Durable Design: Built with double-walled plastic for superior insulation and resistance to dings and damage. Temperature Precision: Displays temperature in Fahrenheit only for reliable heat control. User-Friendly Door: A removable door design makes loading and unloading egg trays easier than ever. Plug & Play Setup: Operates on a standard 110V AC power source, so it's ready to go right out of the box. 2 Year IncuCare Warranty - We've got you covered for longer than anyone else in the industry! Product Description:  Looking for an all-in-one incubator that simplifies egg hatching and guarantees great results? The AccuHatch Pro™ Cabinet Incubator & Hatcher is the ultimate solution for hobbyists and professional breeders. Designed with functionality, durability, and ease of use in mind, this incubator makes hatching eggs a stress-free process. Whether you're working with quail, chickens, or geese, this machine covers you. Its circulating fan ensures even temperature distribution across the unit, so every egg gets the same attention. The hatching trays make transitioning eggs from incubation to hatching seamless. With this unit, you don't need extra accessories or constant supervision. It's designed to run efficiently with minimal intervention, giving you peace of mind while ensuring high hatch rates. This isn't your average incubator. The AccuHatch Pro™ combines innovation with convenience, so you can focus on the joy of hatching without worrying about the details. It's more than just a machine; it's a dependable partner you can count on. Dual Purpose: Use it as an incubator and hatcher in one. No need to transfer eggs to a separate unit! Automatic Features: Say goodbye to constant monitoring. The built-in thermostat, egg turners, and automatic humidity system do the hard work for you. Fits All Sizes: This incubator is built to handle everything from tiny quail eggs to large goose eggs. Large Capacity: Holds up to 600 quail eggs, 280 chicken eggs, or 160 goose eggs. Perfect for scaling up your hatching operation. How It Works Using the AccuHatch Pro™ is as simple as it gets: Set Up the Incubator: Plug it into a 110V outlet and place it in a ventilated area. Load the Eggs: Use the universal egg turners to position your eggs securely. Monitor Conditions: The digital display shows temperature, humidity, and turner countdown so you can monitor the process. Hatching Time: Move the eggs to the included hatching trays and let the incubator finish the job. The AccuHatch Pro™ isn't just a product; it's a solution to the common headaches of hatching. Its massive capacity, durable construction, and hands-off features make it a step above the rest. Plus, its sleek design fits perfectly in any hatchery or farm setup. Ready to elevate your hatching game? Get the AccuHatch Pro™ now and see the difference it makes.

  Incubator Warehouse's Digital Electronic Egg Incubator Thermostat for IncuKit XL Description: This thermostat is very simple to use. Just press the up arrow to set the temperature (in 0.1 degree increments). There is a flame indicator on the screen that shows when the heater is operating. The unit has an 18 inch remote sensor that is placed inside the incubator. The white thermostat case is then mounted on the outside of the incubator. Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) 110V AC Power Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7. NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should. As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine! This is true with any incubator and egg configuration. Calibration Enabled. This means that you can calibrate the thermostat to a specific temperature. For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds).  

Product Features:   HovaBator 2370 Circulated Air Egg Incubator Accurate Electronic Thermostat: Delivers precise temperature control for optimal incubation. Circulated Air Incubator: Circulated air technology ensures uniform heating throughout the incubator. Durable Styrofoam Insulation: Provides excellent heat retention for energy-efficient performance. Digital Display: Bright, easy-to-read display that shows temperature in Celsius or Fahrenheit. Washable Plastic Liner: Sanitary and easy-to-clean design for hassle-free maintenance. Humidity Control: Built-in water channels allow for precise humidity regulation. Starter Kit Accessories IncuTurn™ Automatic Egg Turner with Universal Egg Tray: Rotates eggs six times daily for optimal embryo development. The side-laying egg position mimics natural turning.  Hatching Guidebook: Step-by-step guidance, ideal for both newcomers and experienced breeders. Optional Upgrades IncuTurn Quail Tray (Optional Add-On): Increases IncuTurn capacity to 116 quail eggs, providing greater capacity for small bird hatching. HumidiKit™ Auto Humidity System (Optional Add-On): Automatically maintains set humidity level with an adjustable digital hygrostat, eliminating the need for manual adjustments. Two-Year IncuCare Warranty Comprehensive Warranty: Gives peace of mind and reliable ongoing support. Product Description: Experience precision and ease with the New Electronic Thermostat Hova-Bator Incubator. This advanced incubator is designed for poultry and reptile enthusiasts alike and delivers exceptional accuracy and versatility. It features a bright, easy-to-read display and supports temperature adjustment between Fahrenheit and Celsius for your convenience. With its circulated air system and optional fan shut-off for reptile egg incubation, it’s tailored to meet diverse needs. This incubator includes dual 4x6-inch viewing windows, allowing you to monitor the incubation process without disturbing the eggs. High side walls provide safety by keeping birds inside when the lid is removed. Crafted for efficiency. See the IncuTurn description below for egg capacity. Built to Last: Energy Efficient: Operates on 110 Volt AC, consuming just 30 watts. One-Year Hassle-Free Guarantee: Shop confidently, knowing our reliable warranty backs you.   IncuTurn™ Automatic Egg Turner for HovaBator Egg Incubators The IncuTurn™ Automatic Egg Turner is specifically designed for HovaBator Egg Incubators. The universal egg tray holds any egg size—from quail to chicken to goose eggs—eliminating the need for multiple expensive egg racks. Side-laying eggs mimic the natural egg-rolling process; they turn eggs six times daily, preventing yolk settling and providing vital embryo exercise for high hatch success. The low-profile turner tray allows for hatching in place; no need to remove the turner before hatching. Simply unplug the turner when going into lockdown. Perfect for both beginners and experienced hatchers, the IncuTurn™ egg turner makes egg-turning simple, efficient, and reliable. Features: Universal Egg Tray: Accommodates 42 chicken, 70 quail, or 28 goose eggs, providing ultimate versatility without requiring additional racks. Natural Rolling Motion: Gently roll eggs six times daily, simulating natural turning to prevent yolk settling and support healthy embryo development. Quick & Easy Installation: This automatic egg turner is set up in seconds. 110V Hatch-in-Place design: The low-profile turning tray allows for hatching in the tray; no need to move the eggs. For use in the US and other countries with 110V power. Use a power converter for using 220V. Quail Tray for IncuTurn™ Egg Turner (Optional Selection) Enhance your egg incubation setup with the Quail Tray for IncuTurn™, specially designed to accommodate quail and small bird eggs. This tray optimizes space, increasing egg capacity up to 116 quail eggs, compared to the 70 eggs the universal tray holds. Features: High Capacity: Holds up to 116 quail eggs, offering greater capacity than the universal egg tray. Ideal for Small Eggs: Perfectly suited for quail and small bird eggs, ensuring stable placement during incubation. Seamless Compatibility: Designed as an optional accessory for the IncuTurn™ Automatic Egg Turner for HovaBator incubators. Incubator Warehouse Hatch Guidebook The Incubator Warehouse Hatch Guidebook is an illustrated, 28-page companion to our popular 4-Part Intro to Hatching YouTube Series, designed for beginners and seasoned hatchers alike. This printed guide provides an overview of egg incubation and chick brooding, with easy-to-follow illustrations and practical tips. Whether you're new to hatching or looking to refine your process, this guidebook offers valuable insights to help every hatch succeed. YouTube Video Series: Intro to Hatching Part 1: Setup - Watch Video Part 2: Incubation Period - Watch Video Part 3: Hatching Period - Watch Video Part 4: After Hatch - Watch Video   Take the first step toward successful hatching with the HovaBator 2370 Starter Combo Kit. Order now to get your complete incubation solution today.

Product Features: Superior Accuracy: Officially rated as one of the most accurate incubator thermometers by GQF. Easy External Readings: Features a 4-inch stem that fits into a 5/32" hole, allowing you to monitor the temperature from outside the incubator. Wide Temperature Range: Measures from 25°F to 125°F, with one-degree increments for precise tracking. Clear, Large Display: The 2-inch dial display makes temperature readings quick and convenient. Wet Bulb Functionality for Humidity Control: Comes with pre-attached wicks that absorb water from the humidity pan, allowing you to determine relative humidity levels accurately. Designed for Circulated Incubators: This thermometer should be used exclusively in forced-air incubators for best results. Includes 2 Year Incucare Warranty. Product Description: Maintaining the correct temperature and humidity levels inside an incubator is essential for successful egg incubation. Whether you are breeding poultry, reptiles, or exotic birds, accurate environmental control is key to achieving high hatch rates. This GQF Incubator Thermometer / Hygrometer is a top-tier instrument designed to provide highly precise temperature and humidity readings, ensuring an optimal incubation environment. This wet bulb thermometer is an industry favorite due to its accuracy, easy readability, and durable construction. It is specifically designed for use in circulated air incubators, where a fan evenly distributes heat and humidity, allowing for precise measurements that can significantly impact the success of your hatch. This thermometer is equipped with a wet bulb system, which accurately measures relative humidity. It comes with attached wicks, which must be placed in a water-filled humidity pan. As the water evaporates from the wick, the thermometer measures the cooling effect, allowing you to calculate humidity levels precisely using a wet bulb chart. Unlike traditional digital hygrometers, the wet bulb method is more reliable and consistent in measuring humidity, making it ideal for serious breeders and hatchery operators. This thermometer is one of the most accurate incubator thermometers available. It is manufactured by GQF, a trusted name in incubation equipment. It features a 4-inch (10 cm) stainless steel stem designed to be inserted through a 5/32-inch hole in your incubator. This allows for easy external monitoring without opening the incubator, preventing unnecessary heat and humidity loss. The temperature scale ranges from 25°F to 125°F (-4°C to 52°C) and is marked in 1-degree increments, allowing for precise adjustments to your incubator’s settings. Unlike small digital displays that can be difficult to read, this thermometer features a large, 2-inch analog dial. The clear, high-contrast markings ensure that temperature readings are visible at a glance, even in dimly lit incubator rooms. The 4-inch probe will be inserted through a small pre-drilled hole in your incubator, ensuring a secure and stable fit. This allows continuous monitoring without opening the incubator door, helping maintain stable temperature and humidity. Why Choose the Hova-Bator GQF Incubator Thermometer? Unlike digital thermometers and hygrometers, which can be affected by battery life, calibration issues, or sensor degradation, the Hova-Bator GQF Incubator Thermometer / Hygrometer provides consistent, reliable, and highly accurate readings. This professional-grade thermometer is trusted by poultry, reptile breeders, and hatchery operators worldwide. It is the best choice if you need a dependable, long-lasting solution for monitoring your incubator. How to Use the Wet Bulb Thermometer in Your Incubator Insert the Thermometer – Place the 4-inch probe into the 5/32-inch hole in your incubator. Position the Wick – Ensure the wick is in the humidity pan and properly soaked for accurate wet bulb readings. Read the Temperature – Check the 2-inch dial for accurate readings in one-degree increments. Determine Humidity Levels – Use a wet bulb temperature chart to calculate relative humidity based on the wet bulb reading. Maintain Proper Incubation Conditions – Adjust temperature and humidity as needed for optimal hatching success. Important Notes Before Purchase: For Circulated Air Incubators Only – This thermometer is designed specifically for incubators with fan-driven airflow. It is not recommended for still-air incubators, as the readings may not be accurate. Requires Knowledge of Wet Bulb Readings – This thermometer is ideal for experienced users who understand how to calculate humidity using wet bulb temperatures. If unsure, refer to a wet bulb conversion chart or online humidity calculator. Invest in accurate incubation monitoring with this wet bulb thermometer. With precision temperature control and reliable humidity measurement, it is an essential tool for serious breeders. Shop now and ensure the best conditions for your incubator.

Product Features: Optimized Temperature Regulation: Automatically turns the fan and heater off once the set temperature is reached, preventing overheating. Reduced Air Circulation: Minimizes excessive airflow to help retain moisture and avoid drying out eggs. Easy Installation: Quick and simple to connect to your IncuKit XL; no technical skills required. Durable Design: Built with high-quality materials for long-lasting use in any reptile incubation setup. Product Description: The IncuKit XL reptile adapter extension is the perfect add-on for anyone using the IncuKit XL in larger reptile incubators. It's a game-changer when it comes to controlling temperature and airflow in your incubator, ensuring your reptile eggs get the care they need. Without this adapter, the fan in your IncuKit XL keeps running constantly, which can cause overheating and excessive airflow. This adapter solves the issue by modifying the wiring so that the fan and heater automatically turn off once the desired temperature is reached. The result? Your incubator stays at the perfect temperature without risking overheating or drying out the eggs. Product Specifications: Device Type: Extension adapter for the IncuKit XL Intended Use: For larger reptile egg incubators Functionality: Automatically turns the fan and heater off when the target temperature is reached Material: High-quality, insulated wiring for durability and safety Dimensions: Compact and lightweight, seamlessly integrates with existing IncuKit XL setups   How It Works: The adapter adjusts the wiring of your IncuKit XL so the fan and heater stop running once the incubator reaches its target temperature. This is particularly helpful when the set temperature is close to the ambient room temperature. Instead of constant airflow and unnecessary heating, your incubator runs only when needed, keeping conditions stable and energy usage efficient. When you purchase this item, you'll get: 1 x Reptile Adapter Extension for the IncuKit XL Easy-to-follow installation guide Reptile eggs are sensitive, and small changes in temperature or humidity can affect their development. By using this adapter extension, you're taking a big step toward optimizing your setup for healthier hatch rates. Whether you're breeding geckos, snakes, or other reptiles, this adapter ensures your incubator works smarter, not harder. This adapter is perfect for: Reptile breeders who use the IncuKit XL with larger incubators. Anyone struggling to maintain proper humidity levels in their incubator. Those looking to improve hatch rates by preventing overheating or drying out of eggs. The IncuKit XL Reptile Adapter Extension is the tool you didn't know you needed until now. It's easy to use, solves common problems like overheating and overcirculation, and gives you the confidence to know your eggs are in the best possible environment. Ready to improve your hatch rate and make incubation stress-free? Add the IncuKit XL Reptile Adapter Extension to your setup today.

This is a Brand New Sammax style thermostat that works GREAT in an incubator! Included with purchase:    * Thermostat with a temperature range of 80-115 F (Long 1.5" shaft can go through thick styrofoam walls)    * Screw nut that screws onto the thermostat shaft to help attach to a surface or panel    * 15A rating    * Can be used with either AC or DC applications    * Comes with a wiring diagram for wiring in a fan and a heaterCaution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protecting screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!