Search results for "cabinet incubators":

Replacement 3- Prong Power Cord for Rcom Incubators and Brooders. Approx. 6 ft long.

Product Features: Complete Replacement Kit: Includes a wafer thermostat, wing nut, adjustment screw, and a new taller mounting bracket for enhanced performance. Precise Temperature Regulation: The thermostat wafer expands and contracts with temperature changes, ensuring stable heat regulation inside your incubator. Upgraded Bracket Design: Improved height for better stability and easy mounting. Compatible with GQF Incubators: Specifically designed to work with GQF Analog Cabinet Incubators and Brooders, making it an easy replacement for outdated or damaged components. Easy to Install & Adjust: Simple screw adjustments let you fine-tune the temperature with minimal effort. Product Description: Maintaining the perfect temperature inside an incubator is crucial for successful hatching. This Thermostat Wafer Kit directly replaces GQF models 3007 & 3010, ensuring accurate and consistent temperature regulation in analog cabinet incubators and brooders. Whether you're incubating poultry, reptiles, or exotic bird eggs, this thermostat wafer provides precise control over temperature fluctuations, leading to higher hatch rates and improved incubation success. If you're experiencing temperature instability, difficulty adjusting heat levels, or outdated incubator parts, this premium replacement kit is the solution you need. What's Included in the Kit? This complete incubator thermostat wafer kit includes: 1 x Thermostat Wafer – Expands and contracts with temperature changes to provide accurate heat control. 1 x Adjustable Screw – Allows for fine-tuning temperature settings for optimal incubator performance. 1 x Wing Nut – Ensures a secure fit for easy installation and adjustment. 1 x Taller Mounting Bracket – Designed for better compatibility and improved performance over older models. This all-in-one kit makes replacing your incubator's thermostat wafer quick, easy, and hassle-free. How Does the Thermostat Wafer Work? The thermostat wafer is a simple but highly effective device in many incubators. It operates using a natural expansion and contraction process: When the incubator heats up, the wafer expands, triggering the adjustment screw to reduce heat output. When the incubator cools down, the wafer contracts, allowing the heating element to turn on again. This cycle ensures consistent temperature control, which helps for proper embryo development and a successful hatch rate. Unlike digital thermostats that use sensors, the wafer system works mechanically and is reliable. That's why both breeders and hobbyists prefer it. Why Upgrade to This Thermostat Wafer Kit? The wafer thermostat is a crucial component in any incubator. It controls the internal temperature by expanding and contracting with heat changes. Over time, older wafers lose sensitivity, leading to temperature fluctuations that can negatively impact hatching rates. By replacing outdated models 3007 & 3010 with this new and improved kit, you benefit from: More precise temperature control for higher hatch success. Increased durability for long-term performance. Improved performance with the taller bracket upgrade. Step-by-Step Installation Guide Remove the old thermostat wafer from your incubator. Attach the new mounting bracket securely. Insert the new thermostat wafer and fasten it with the wing nut. Adjust the screw to fine-tune temperature settings. Test your incubator to ensure the correct heat levels are maintained.   A faulty thermostat wafer can ruin a hatching cycle. Don't take the risk. This thermostat wafer kit ensures your incubator runs smoothly, providing the perfect conditions for healthy hatchlings. Order Now.

Replacement turner motor assembly for cabinet model incubators featuring the 3258 digital command center. 110 VAC NOTE: If the incubator has a single fan and a 3258 command center, use the original galvanized brackets with the new motor.

  Incubator Warehouse's Digital Electronic Egg Incubator Thermostat for IncuKit XL Description: This thermostat is very simple to use. Just press the up arrow to set the temperature (in 0.1 degree increments). There is a flame indicator on the screen that shows when the heater is operating. The unit has an 18 inch remote sensor that is placed inside the incubator. The white thermostat case is then mounted on the outside of the incubator. Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) 110V AC Power Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7. NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should. As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine! This is true with any incubator and egg configuration. Calibration Enabled. This means that you can calibrate the thermostat to a specific temperature. For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds).  

Incubator Warehouse's Digital Electronic Egg Incubator Thermostat Description: This thermostat is very simple to use.  Just press the up arrow to set the temperature (in 0.1 degree increments).  There is a flame indicator on the screen that shows when the heater is operating.  The unit has an 18 inch remote sensor that is placed inside the incubator.  The white thermostat case is then mounted on the outside of the incubator.  Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Thermostat set point can be adjusted to any temperature between 41 - 113 degrees Fahrenheit Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) Select your voltage above in the drop down box (220/240V AC ONLY).  220/240V AC is for most places outside of North America. Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7.  NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should.  As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine!  This is true with any incubator and egg configuration.  Calibration Enabled.  This means that you can calibrate the thermostat to a specific temperature.  For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds). Product Instructions: IncuStat™ Basic

Upgrade your wafer thermostat or replace an old electronic thermostat with this Multi-Turn thermostat. This unit offers more accurate adjustment of temperature over single turn thermostats, as one complete revolution changes temperature only 1.7°F. 110 Volts, 400 Watts maximum. This thermostat is the recommended replacement for non-preset electronic thermostat models and wafer thermostat models. Electronic Thermostats are guaranteed for use in GQF Cabinet incubators only. Replaces PN 3140

Valve/Float Assembly for cabinet incubator. Compatible with GQF 3030 Water Reserve System.

This listing is for brand new cartridge-style heaters. These heaters work well for heating cabinet incubators. They are each 3/8" diameter x 8" long (203mm). This listing is for the 220/240V 125 Watt version. We have another listing for a 110/120V version. The cartridge is made of Stainless Steel tubing. The electrical connection wires are a full 24" long with fiberglass insulation; the first 2 inches have an extra silicone sealing.

Product Features: 25 Tray Liners per Pack: Each pack contains 25 disposable tray liners, ensuring you're stocked up for multiple hatching cycles. Increased Traction for Chicks: Provides traction to safeguard newly hatched chicks during their delicate early stages.  Helps prevent splayed legs.   Enhanced Safety: Provides firm footing to prevent injuries. Durable 2-Ply Heavy Paper: Designed to withstand the hatching process while being disposable. Hygienic Protection: Treated with mild germicide for odor and bacteria control. Effortless Cleanup: Makes post-hatching maintenance fast and stress-free. Product Description: Keep your hatching process clean, safe, and efficient with the DACB Hatching Tray Liner 25-Pack. Specially designed to fit the No. 1502 and 1202E hatching drawers, these durable 2-ply heavy paper liners provide excellent traction for newly hatched chicks, ensuring their comfort and safety. The top ply is treated with a mild germicide to control bacteria, minimize odors, and maintain a hygienic environment throughout the hatching process. With firm footing for chicks, these liners promote healthy movement as they grow while offering a hassle-free cleanup solution. This helps prevent splay leg and spraddle leg from developing.  Their durable yet disposable design makes them an essential addition to your No. 1502 and 1202E incubators. Each pack includes 25 liners, measuring 13.25" x 27.69", to provide ample coverage for your trays. With their disposable design, these tray liners make post-hatching cleanup faster and easier than ever before. Whether you're a professional breeder or a hobbyist, the DACB Hatching Tray Liner is an essential tool for maintaining the cleanliness and health of your incubator setup. Why Choose the DACB Hatching Tray Liner? Cleanliness Made Simple: Say goodbye to tedious scrubbing with disposable liners that minimize maintenance time. Hatch with Confidence: Germicide treatment promotes a cleaner environment, fostering healthier chicks. Extra traction helps prevent splay leg and spraddle leg in new chicks.   Perfect Fit: Tailored for seamless use with No. 1502 and 1202E hatching drawers. Product Specifications: Liner Dimensions: 13.25" x 27.69" Material: 2-Ply heavy paper with mild germicide treatment Quantity: 25 liners per pack Compatibility: Ideal for GQF No. 1502 and 1202E incubator hatching drawers How to Use: Line the hatching drawer with one tray liner. Place the eggs as usual for hatching. After hatching, dispose of the used liner and replace it with a fresh one. Improve Your Hatching Experience Upgrade to the DACB Hatching Tray Liner 25-Pack for a cleaner, safer, and more efficient hatching process. Give your chicks a safe, tractioned start while saving time on post-hatching cleanup. Don't let cleaning hassles overshadow the joy of hatching. Order your DACB Hatching Tray Liner today and experience a smoother, more hygienic hatching process.  

Replacement inside sensor assembly for GQF 1500 series incubators with factory installed 3258 Digital Command Center. The date stamped on the back of the thermostat must be prior to 2016 to be compatible with this sensor.