Search results for "digital Thermometer":

Description One of the most accurate ways to determine if the humidity inside an incubator is correct is by the weight loss of an egg during incubation. During incubation as air passing through the shell of the egg causes some of the water to evaporate inside the egg making the egg lose weight. Jumbo size eggs typically sell for more than medium size eggs; this is why having the ability to accurately size your eggs can increase your profits. This IncubatorWarehouse.com’s EggScale has can accommodate any size egg from quail to goose while still having a compact design which makes it easy to store. The recessed egg tray keeps eggs from rolling while they are being weighed and the blue backlit LCD display makes it easy to read. Easy to follow instructions for measuring humidity by weight loss and egg sizing chart make using the scale a breeze. As always all or our products are covered by our One Year No-Hassle Guarantee so you can purchase with confidence. 

The two biggest factors in achieving a successful hatch are correct temperature and humidity. With these factors in mind, we created the IncuTherm™ series digital thermometer/hygrometers. The IncuTherm Plus™ is able to accurately measure and display the temperature and relative humidity at the same time which can be displayed in both Fahrenheit or Celsius . The probe is placed inside the incubator. This allows the IncuTherm Plus™ to measure temperature and humidity on the inside of your incubator and display it on the outside. The built-in high and low memory stores the highest and lowest temperature and humidity readings since the last memory reset. This helps you ensure ideal conditions for a successful hatch. The IncuTherm Series has been factory calibrated to be accurate to within +/- 1°F (0.5°C) in the incubation temperature ranges. This is twice as accurate as most standard digital thermometers available on the market. This accuracy level makes the IncuTherm Series the easy choice when selecting a digital thermometer for your next hatch. As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the IncuTherm Plus™ Hatch Monitor for yourself.

The two biggest factors that affect hatch rate are temperature and humidity. With these factors in mind, we created the IncuTherm™ series of digital thermometer/hygrometers. The IncuTherm™ is able to accurately measure and display the temperature and relative humidity at the same time and can be set to either Fahrenheit or Celsius. Its compact design allows the IncuTherm™ to be placed inside the incubator without taking up much space, but the LCD screen is still easily readable. The built-in high and low memory feature stores the highest and lowest temperature and humidity readings since the last memory reset, which helps you ensure ideal conditions for a successful hatch. The IncuTherm™ has been factory calibrated to +/- 1°F (0.5°C) precision, which is twice as accurate as most standard digital thermometers available on the market. This accuracy level makes the IncuTherm™ series the easy choice when selecting a digital thermometer for your next hatch. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the IncuTherm™ Digital Thermometer/Hygrometer for yourself.

This Hygrometer works great for measuring humidity in any incubator. The humidity gauge displays the humidity in the air as a percentage. This hygrometer is also a replacement for the hygrometer in the No. 1140 Incubator Warehouse IncuView Incubator Lid (Current model only - Does not replace the old dial hygrometer).

Incubator Warehouse's Digital Electronic Egg Incubator Thermostat Description: This thermostat is very simple to use.  Just press the up arrow to set the temperature (in 0.1 degree increments).  There is a flame indicator on the screen that shows when the heater is operating.  The unit has an 18 inch remote sensor that is placed inside the incubator.  The white thermostat case is then mounted on the outside of the incubator.  Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Thermostat set point can be adjusted to any temperature between 41 - 113 degrees Fahrenheit Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) Select your voltage above in the drop down box (220/240V AC ONLY).  220/240V AC is for most places outside of North America. Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7.  NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should.  As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine!  This is true with any incubator and egg configuration.  Calibration Enabled.  This means that you can calibrate the thermostat to a specific temperature.  For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds). Product Instructions: IncuStat™ Basic

Product Features:   Precise Humidity Regulation: Automatically controls humidity for ideal conditions. Digital Programmable Hygrostat: Customizable settings for consistent performance. Instant Humidity Delivery: Ensures optimal air moisture levels immediately. Enhanced Air Circulation: Provides fresh, clean air for eggs. Convenient 1-Liter Capacity: Designed for distilled water; lasts up to a week in tabletop incubators. Effortless Installation: Quick and easy setup. Expandable Reach: Tubing extends up to 30 inches for versatile use. Broad Compatibility: Works seamlessly with most incubators. Trusted Durability: Backed by a two-year IncuCare Warranty.   Product Description:   Managing the right humidity in your incubator is crucial for successful egg hatching. The HumidiKit™ is an advanced automatic humidity control system specifically designed for egg incubators. Equipped with a programmable digital hygrostat, this system ensures accurate humidity control and allows you to adjust settings to achieve the perfect environment for your eggs, improving your hatch rates. With its 1-liter capacity, the HumidiKit™ delivers instant humidity while circulating fresh air inside the incubator, ensuring optimal conditions. In tabletop incubators, this system typically requires a weekly refill, making it a low-maintenance solution. Installation is easy and seamless with expandable tubing that connects to any ½” vent hole for flexible placement. The HumidiKit™ offers the perfect combination of convenience and precision, ensuring your eggs receive the best possible environment. Its automatic humidity control eliminates the need for constant monitoring, while the digital hygrostat makes it easy to set the ideal humidity levels. With weekly refills and easy installation, this system is a low-maintenance solution for anyone serious about egg incubation. 

  Incubator Warehouse's Digital Electronic Egg Incubator Thermostat for IncuKit XL Description: This thermostat is very simple to use. Just press the up arrow to set the temperature (in 0.1 degree increments). There is a flame indicator on the screen that shows when the heater is operating. The unit has an 18 inch remote sensor that is placed inside the incubator. The white thermostat case is then mounted on the outside of the incubator. Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) 110V AC Power Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7. NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should. As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine! This is true with any incubator and egg configuration. Calibration Enabled. This means that you can calibrate the thermostat to a specific temperature. For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds).