Search results for "Best":

Products

Poultry Water Nipples w/ Gasket & Wing Nut
$2.99
Watering nipples are one of the best upgrades to a traditional chicken waterer. They're mess-free, so you'll spend far less time cleaning and scrubbing out poopy, dirty waterers, and more time enjoying your flock. Screw these nipples into the container of your choice (instructions provided), such as 5-gallon plastic buckets or a PVC pipe. What sets these apart from vertical nipples: they don't drip and, because no water is stored in the nipple unit even when your bucket or drinker is full of water, they won't freeze during the winter provided you're heating your water supply. Comes with the Incubator Warehouse 2 Year IncuCare Warranty. Installation requires a 3/8" drill bit. Don't have one? You can get yours HERE.
Noble Nest™ 5 Gallon Bucket Nipple Waterer
from $48.99
Imagine a chicken waterer that could save you money and allow you to go longer between feedings, making it easier for you to get things done, leave town or go on vacation. Believe it or not, the Noble Nest™ Bucket Nipple Waterer does all of this and more! They even clean the coop for you! – (Just Kidding, but don’t you wish?) Chickens need clean and fresh water to live and produce those amazing eggs we all love. The Noble Nest™ Bucket Nipple Waterer is effective at keeping water clean and fresh. In addition, the sealed nipple design prevents leaking. Durable Plastic construction means years and years of dependable use. Noble Nest™ Bucket Nipple Waterer is available in multiple configurations to easily allow installation in any coop, run, or free-range layout. Holds an impressive 5 gallons of water. Why are you still reading? Start saving money, and time by buying the Noble Nest™ Bucket Nipple Waterer now. And remember It’s backed by the Incubator Warehouse IncuCare 2 Year Warranty, so you’ve got nothing to lose. Are you really still reading this? Ok, we’ll throw in some free instructions.   Noble Nest™ Waterer Configurations 5 Nipple, Side Waterer Designed to sit on the side of coop or where one side of the waterer is not accessible to birds, though it could also be used in other locations as well. 8 Nipple, 360° Waterer Designed for 360° access for birds, best used in location where birds can access all sides of waterer.
HumidiKit™ - Automatic Incubator Humidifier System
$126.99
Product Features:   Precise Humidity Regulation: Automatically controls humidity for ideal conditions. Digital Programmable Hygrostat: Customizable settings for consistent performance. Instant Humidity Delivery: Ensures optimal air moisture levels immediately. Enhanced Air Circulation: Provides fresh, clean air for eggs. Convenient 1-Liter Capacity: Designed for distilled water; lasts up to a week in tabletop incubators. Effortless Installation: Quick and easy setup. Expandable Reach: Tubing extends up to 30 inches for versatile use. Broad Compatibility: Works seamlessly with most incubators. Trusted Durability: Backed by a two-year IncuCare Warranty.   Product Description:   Managing the right humidity in your incubator is crucial for successful egg hatching. The HumidiKit™ is an advanced automatic humidity control system specifically designed for egg incubators. Equipped with a programmable digital hygrostat, this system ensures accurate humidity control and allows you to adjust settings to achieve the perfect environment for your eggs, improving your hatch rates. With its 1-liter capacity, the HumidiKit™ delivers instant humidity while circulating fresh air inside the incubator, ensuring optimal conditions. In tabletop incubators, this system typically requires a weekly refill, making it a low-maintenance solution. Installation is easy and seamless with expandable tubing that connects to any ½” vent hole for flexible placement. The HumidiKit™ offers the perfect combination of convenience and precision, ensuring your eggs receive the best possible environment. Its automatic humidity control eliminates the need for constant monitoring, while the digital hygrostat makes it easy to set the ideal humidity levels. With weekly refills and easy installation, this system is a low-maintenance solution for anyone serious about egg incubation. 
IncuKit™ XL for Cabinet Incubators
from $79.99
The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  
IncuKit™ MINI 2 for Desktop Incubators | Thermostat, Fan & Heater
$69.99
Many people prefer to build their own incubators. This is a fun do-it-yourself project. We’ve found that the biggest difficulty people run into while developing their incubators is finding a reliable heat source and thermostat. We’ve solved this problem by creating the IncuKit™ series thermostat fan heaters. We have created the IncuKit™ MINI to turn any small container into an incubator. This provides the heat, air circulation, and thermostat control you need to accurately control the environment in your container for hatching eggs. The IncuKit™ MINI has a proportional thermostat, built-in 60-watt heater, and fan. The proportional thermostat controls the amount of power that is supplied to the heater instead of simply turning the heater off and on. This provides more accurate temperature control than a standard off/on thermostat. The thermostat also comes preset to 99.5 degrees F which can be easily adjusted if necessary. The digital display makes it easy to read the current temperature and to make changes. The IncuKit™ MINI operates on low 12 Volt DC power and includes an AC-to-DC converter that works with both 110/120v and 220/240v power input. In case of power outages, the IncuKit™ MINI can also be powered with a 12V battery (additional battery connectors required). NOTE: You can optionally purchase the car power adapter or battery clips so you can keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. As always, all of our products are covered by our 2-Year IncuCare Warranty. Purchase today with no worries and experience the IncuKit™ MINI for yourself. How to determine the appropriate size container for the IncuKit MINI: There are several factors that determine how much power will be required to heat your container up to the appropriate temperature to hatch eggs. The size of the container, how well it is insulated, the room temperature, and how much the room temperature fluctuates will all have a significant impact. The best way to determine if the IncuKit™ MINI is the right size for your container is pretty simple. Just put a 60-watt light bulb in your container (ensure it is thermally insulated since they get pretty hot!) and measure how warm your container gets. If it easily gets to at least 100 degrees F, then the IncuKit™ MINI should work. It is the user’s responsibility to determine if this product will generate enough heat for your container.    
Cabinet Egg Turner Motor 110V AC | 1 RPM
$39.99
This Egg Turner Motor is perfect for cabinet egg incubator applications, providing very high torque (60 lbs/in) it can easily turn a variety of egg turner designs. The motor is 1 RPM (makes 1 revolution per minute), so it is best used with a timer to prevent overturning your eggs. This motor works great with the IncuKit XL Advanced because they have built-in egg turner timer controls.  The motor shaft has a D shape and also a hole through the shaft for easy egg turner linkage.  110V AC Power.

Pages

Egg Candling Popular Search Terms Buying Hatching Eggs Using the IncuKit™ Reptile egg candling Customer Service

Articles

Top 5 Best Tabletop Incubator accessories 5 Best Incubator Hacks of ALL TIME! Best chicken breeds for egg production and incubation