Incutherm™ Plus Hatch Monitor With Digital Thermometer & Hygrometer

$26.99

Incutherm™ Plus Hatch Monitor With Digital Thermometer & Hygrometer

$26.99
Description More Information FAQ Instructions

Product Features:


  • Dual Measurement: Displays both temperature and humidity simultaneously.

  • Remote Probe: 24" cord with a sensor designed to fit vent holes of Little Giant & Hova-Bator incubators.

  • High Accuracy: Factory calibrated to +/- 1°F (0.5°C) within incubation temperature ranges.

  • Memory Function: Stores high and low temperature/humidity readings for easy tracking.

  • Multiple Mounting Options: Includes 2 strong magnets for easy attachment and a flip-out stand for tabletop use.

  • Temperature Display: Switch between Fahrenheit and Celsius effortlessly.

  • Battery Included: Powered by a long-lasting 3V CR2032 battery, so you can start monitoring immediately.

  • Compact Design: Lightweight and easy to transport, with a large LCD screen for quick readability.

  • 2-Year IncuCare Warranty


Product Description: 


Are you looking for a reliable way to improve your hatch rates? The IncuTherm Plus™ Hatch Monitor is exactly what you need. This handy device helps you track two of the most important factors for a successful hatch: temperature and humidity. With these factors in mind, we created the IncuTherm™ series of digital  thermometer/hygrometers.With its simple setup, real-time monitoring, and compact design, this tool is perfect for both beginners and seasoned hatchers.

The IncuTherm Plus™ gives you real-time updates on both temperature and humidity right on a large, easy-to-read LCD screen. Whether you prefer Fahrenheit or Celsius, you can switch between the two with the push of a button. The remote probe, connected by a 24-inch cord, fits neatly into the vent holes of Little Giant and Hova-Bator incubators. This allows you to monitor conditions inside the incubator without opening it, which is key to stabilizing heat and humidity.

What makes this monitor even better? It stores the highest and lowest temperature and humidity readings since the last reset. This means you can easily spot trends and make adjustments to keep everything running smoothly. It's like having a second pair of eyes on your incubator 24/7.

 

It's compact, simple to set up, and comes with a few thoughtful features that make life easier:


  • Magnets on the back let you stick it to metal surfaces for a clean, organized setup.

  • A flip-out stand allows you to place it on a flat surface if that's more your style.

  • It's battery-operated, and yes, the battery is included (because no one likes making an extra trip to the store).


Unlike other thermometers, this one is designed specifically for hatching. It's calibrated to be accurate within ±1°F (0.5°C), which is twice as precise as most standard thermometers. That level of accuracy can make a huge difference when you're trying to create the perfect environment for your eggs.

It's also designed to work perfectly with some of the most popular incubators, including Little Giant and Hova-Bator. Just pop the probe into the vent holes, and you're good to go. (Note: For other models you will need a ⅝” hole or a notch to allow the cord to go through the lid/base seam)


How to Use the IncuTherm Plus™ Hatch Monitor


  1. Insert the Remote Probe: Place the probe through the vent holes in your incubator, ensuring it's positioned at the same location as your eggs.

  2. Adjust the Settings: Choose between Celsius or Fahrenheit using the convenient toggle button.

  3. Mount or Position the Monitor: Use the magnetic backing to attach it to the incubator or prop it up using the flip-out stand.

  4. Track Temperature and Humidity: Monitor real-time readings on the large LCD screen and check high/low memory for trends.

  5. Reset Memory as Needed: Clear stored readings to prepare for a new batch of eggs.


Creating the perfect environment for hatching eggs doesn't have to be difficult. With the IncuTherm Plus™ Hatch Monitor, you'll have all the tools you need to monitor temperature and humidity like a pro.

Order yours today and see the difference for yourself. With our 2-Year Hassle-Free Warrantee, there's no risk, just better hatching results waiting for you

 

SKU : 1109

CONDITION : New

Weight : 0.13 lb

COUNTRY of ORGIN : China

DIMENSIONS : 2.5" x 2" x 0.5"

MODEL : TH01

VOLTAGE : North America (110/120 Volt AC)

Color : Black

Battery : CR2032

QUESTIONS & ANSWERS

Ask a Question
  • What is the accuracy of this thermometer?

    We recognize it is incredibly difficult to find thermometers that are accurate and match other thermometers. The IncuTherm™ Series has an range of + or - one degree for accuracy. This means if your Incutherm™ reads 99.5 degrees Fahrenheit the actual temperature can be between 98.5 and 100.5 degrees Fahrenheit. Our Incutherm™ series is specifically designed to give accurate readings to improve your hatching experience. If you have any issues please contact our friendly customer service agents.

  • Will this probe of the IncuTherm Plus™ Hatch Monitor fit into the vent hole of the Janoel 12 incubator?

    Sadly the IncuTherm Plus™ Hatch Monitor probe will not fit through the vent hole of the Janoel 12 incubator. However, you can place the whole unit on the inside between the side of the turner tray and the clear exterior wall. The IncuTherm™ Temp/Humidity Gauge also fits very well in the small area between the turner tray and clear wall allowing you to easily read the humidity levels and temperature.

  • Is the probe designed so that the actual sensor is safe from mist or a quick spray, as might be encountered in a vivarium used for dart frogs and the like?

    The probe is meant to withstand incubation temps and humidity levels, it should do just fine in a dart frog enclosure as well.

  • Will the probe unplug from the unit so that you could back feed the probe through the vent hole of a genesis 1588?

    It will not unless the probe cover is removed, then you can carefully place the probe through the vent hole and the put the probe cover back on.

  • What is the probe dimensions?

    The probe is about 2 inches long and .5 inches wide.

  • Will this probe fit through the hole in the top of the IncuView?

    No, the probe on the IncuTherm Plus will not fit through the vent hole on an IncuView.

Product Instructions & Documents

Customer Reviews

Based on 21 reviews
90%
(19)
5%
(1)
5%
(1)
0%
(0)
0%
(0)
J
Jonathan Peters
Game changer

Definitely worth the money

B
Beth Carducci
Love it!

It's absolutely perfect for my hermit crab tanks. The unit sits outside the tank, while the thermometer/humidity sensor hangs inside the tank. I don't have to worry about battery corrosion from the humid environment inside the tank. Accurate from 1-2% after calibration was performed. This is the second time I bought these gauges. I'm still using the gauges from last year, as the second set are a back up to have just in case I need them. Excellent product.

B
Bonita Bayless
Unsure

It is so frustrating trying to find an accurate thermometer/ hygrometer. This one came highly recommended but I’m not convinced. It might be accurate? it says one of my incubators is running under temp, but it hatches eggs early? It also claims to fit through the vent hole of the havabator and little giant, but it won’t. Far too wide/ oval not round.

B
Beth Carducci
Excellent

I wanted a hygrometer that had a probe that measures humidity and hangs inside the tanks, while the unit itself sits on the outside of the tanks. I have land hermit crabs and they need the air to be humid and warm at all times. They cannot breathe without humidity. I didn't want to use a gauge that was placed into the tank because the batteries corrode due to the humidity being moderate/high. (80-85) I was pleasantly surprised when I calibrated the gauges (3), all were at 77 degrees temperature, 2 were 77% humidity and the 3rd was 76% humidity after 24 hours of calibration. I posted pics and info about the gauges on our crab group and someone from the group was very interested in purchasing your product! I hope you get business from our group! (Land Hermit Crab Owners Society, Crab Street Journal) Thank You!!!!

N
NoogHmoob
Great stuff

I am new to incubating. I purchased two of these to use my incubators after having really poor hatch rates. Both read really close to each other, +/-1 degrees for temperature. Humidity were both really close, within +/-3% to each other. My hatch rates increased by a lot. From less than 25% to over 50% hatch rate with all my chicken and gamebird eggs. I now only use these to monitor my incubators. These are well worth the money if you have the foam incubators like I do. They seem expensive for their size, but they helped hatch over 100 quails by now, and hopefully they will continue to help hatch hundreds more.