Search results for "all in 1":

This dimmer switch works perfectly with Wonder Watt heat tape. This allows you to control the amount of power that goes into Wonder Watt and as a result, controls the temperature. Total length of the cord is 5 feet. Works for 110 Volt (100 watts MAX) & 220/240V (200 Watts MAX) PowerWonder Watt is a great way to heat many applications. Some examples include: Egg incubatorsReptile cagesReptile warm spotsDog housesPipesSeed germination mats Plant startsSatellite discsDesk warmerKeyboard warmerFoot warmer ...and just about anything else you can think of that you would want to warm up. This dimmer switch allows you to regulate how much power goes to the Wonder Watt heat tape so you can increase or decrease the temperataue. It can also help ensure you don't overheat the tape. Very simple to use, just plug the cord from your heat tape into the dimmer plug and then the dimmer plug into the wall. That's it! The knob turns to let you regulate how much power goes in.Let us know if you have any questions.Wondering how to configure Wonder Watt? Please see these three instructional videos. The dimmer in this listing replaces the turn-style dimmer in these videos. After you attach it to your Flex Watt, it requires NO additional wiring, just plug it in! Video #1: Shows how to attach the clips insulators. Video #2: Shows how to splice in the dimmer. Video #3: Shows how to mount Flex Watt using foil tape.

This is ONLY a rebuild kit for the Old Style AutoCoop Door Opener.  Purchase includes the white timer and the internal circuit board needed to completely rebuild your AutoCoop Door Opener Controller. Power supply not included.

Power supply for the KEBONNIXS incubator. 110V-240V AC power input 12V DC output. Compatible with models KDI－12 & KDI12

This innovative design conforms to the surface to better transfer heat to your bucket. This combined with the insulating pad ensures that the warmth get more effectivley to the water which allows this lower power heater to still be effective down to 0 degrees F. And it comes with a built-in thermostat so if it gets warm outside, it shuts the power off, saving you money! Keeps upto 6 gallons of water from freezing down to 0°F! Need less than 6 gallons? Try 65 watt designed for up to 3-gallons Provides better freeze protection with less electricity, Built in Thermostat so unit turns on at 37 degrees F to save energy! Made to UL 499, with GFCI for increased safety As always, includes our 2-year warranty

AutoCoop™ Smart Door Controller

Incubator Warehouse's Digital Electronic Egg Incubator Thermostat Description: This thermostat is very simple to use.  Just press the up arrow to set the temperature (in 0.1 degree increments).  There is a flame indicator on the screen that shows when the heater is operating.  The unit has an 18 inch remote sensor that is placed inside the incubator.  The white thermostat case is then mounted on the outside of the incubator.  Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Thermostat set point can be adjusted to any temperature between 41 - 113 degrees Fahrenheit Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) Select your voltage above in the drop down box (220/240V AC ONLY).  220/240V AC is for most places outside of North America. Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7.  NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should.  As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine!  This is true with any incubator and egg configuration.  Calibration Enabled.  This means that you can calibrate the thermostat to a specific temperature.  For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds). Product Instructions: IncuStat™ Basic

AutoCoop door panel

This is a Brand New Sammax style thermostat that works GREAT in an incubator! Included with purchase:    * Thermostat with a temperature range of 80-115 F (Long 1.5" shaft can go through thick styrofoam walls)    * Screw nut that screws onto the thermostat shaft to help attach to a surface or panel    * 15A rating    * Can be used with either AC or DC applications    * Comes with a wiring diagram for wiring in a fan and a heaterCaution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protecting screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!

Set of 4 Replacement leg collars and thumbscrews for the Vrooder frame.

This fan is made with durable ball bearings for long life. Mounting holes on each corner make mounting in your incubator very easy. Just wire into your incubator so the fan is always on to keep your cabinet incubator temperature uniform. We also sell a 110V version. 220V AC, 80-105 CFM, 0.1 Amps, 22 Watts Purchase includes Two Year IncuCare Warranty.

Replacement 2 Part frame clip for Vrooder frame.