Search results for "All in 1":

The EZ Incubator Water Trough Filler makes the task of adding water accurately to any incubator a breeze. No more spilling water, overfilling, or guessing where your water will go.

What is IncuClean? IncuClean is a non-toxic after wash sanitizing spray. This spay will aid in sanitizing your cleaned incubator helping to prevent additional bacteria, virus, and other harmful organisms from impacting your hatch rate.   Includes: One spray bottle with 3 oz. of IncuClean sanitizing spray. Instructions: Spray your cleaned and dried incubator with IncuClean, avoiding electrical components. Allow to air dry before use or storage. Warning:  Avoid contact with eyes, minor irritation may occur. 

Genuine power supply for the IncuView and IncuKit Mini. 110V-240V AC power input 12V 5A DC output.

Pkg. 5 Large Egg Racks. For use with larger eggs such as duck, turkey, and goose. Comes with instructions on how to configure racks in turner. Holds up to 19 eggs. Turner NOT Included.

This Hygrometer works great for measuring humidity in any incubator. The humidity gauge displays the humidity in the air as a percentage. This hygrometer is also a replacement for the hygrometer in the No. 1140 Incubator Warehouse IncuView Incubator Lid (Current model only - Does not replace the old dial hygrometer).

Replacement 2 Part frame clip for Vrooder frame.

Turning Tray for IncuTurn

Replacement 3- Prong Power Cord for Rcom Incubators and Brooders. Approx. 6 ft long.

Styrofoam Lid for GQF 2370 Incubator. Styrofoam and windows ONLY, NO Electronics. Styrofoam may contain small imperfections and marks (see pictures for examples)

Fan Heater Combo Unit for the IncuKit™ XL. 125 Watt Heater and High Power Circulated Air Fan.  220V AC Power Click here to see the 110V North America Version.

Incubator Warehouse's Digital Electronic Egg Incubator Thermostat Description: This thermostat is very simple to use.  Just press the up arrow to set the temperature (in 0.1 degree increments).  There is a flame indicator on the screen that shows when the heater is operating.  The unit has an 18 inch remote sensor that is placed inside the incubator.  The white thermostat case is then mounted on the outside of the incubator.  Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Thermostat set point can be adjusted to any temperature between 41 - 113 degrees Fahrenheit Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) Select your voltage above in the drop down box (220/240V AC ONLY).  220/240V AC is for most places outside of North America. Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7.  NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should.  As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine!  This is true with any incubator and egg configuration.  Calibration Enabled.  This means that you can calibrate the thermostat to a specific temperature.  For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds). Product Instructions: IncuStat™ Basic

Most of our products use 110V AC power, but we sell of lots of incubators internationally, and other countries use 220/240V AC power, so we've created a converter kit. It provides everything you need to power ONE Little Giant OR HovaBator Egg Incubator Combo Kit (Incubator, Fan Kit, and Egg Turner) internationally. This power converter kit is specially designed for continuous use (most power converters will wear out under constant use). Converts 220/240V AC power to 110V AC power, UP TO 100 Watts. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the 220/240V Voltage Converter Kit for yourself.

Replacement Fan/Heater Unit for GQF 2370 Tabletop Incubator.

Replacement Alarm for GQF Cabinets 3-24V DC