Search results for "egg incu":

AutoCoop™ LayLight Programmable Coop Light The LayLight is a high efficiency LED light for your chicken coop.  This will provide the extra light your hens need to continue laying eggs into the Winter months.  As daylight decreases, chickens naturally decrease the number of eggs they lay.  To continue laying through the Winter months, they need a little extra light so their internal clock tells them to keep producing.  This light also works to light up your coop on-demand if you need light at night.  Need a timer light for another purpose?  Also works great for sheds, barns or any other area where some light would be helpful.  Features: Super bright, high efficiency, high output LED light Dispersing lens optimizes light distribution Easy-to-program timer (lots of programming options!) Easy to mount Simple plug-n-play set up Also includes manual on/off button on the timer for on-demand light Note: The LayLight is designed to be used inside your coop (or shed, barn, etc) where it will be kept from outside elements (rain and snow).  It is not designed to be used outside the coop and exposed to all weather elements.  Heat and cold are no problem.  But water is a no-no.  Also, the controller for the AutoCoop LayLight looks similar to the AutoCoop Door Opener.  However, they are NOT interchangeable.  The internal electronics are different.  

The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.