Search results for "egg incubators":

The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  

Invented by G.Q.F. Manufacturing Co. over 30 years ago, the Hova-Bator is still considered by many to be the WORLD’S BEST SMALL INCUBATOR, and among the most economical incubators available. The circulated air Hova-Bator uses a slower speed, gentle flow fan to hold a more uniform temperature. The gentle flow fan provides enough air movement to keep a constant temperature, but helps prevent dehydration of the eggs. It uses FORCED AIR FLOW, where the radiant heat tube gently warms the inside of the incubator while the fan draws fresh air from the bottom vents and circulates it throughout. Since heat rises, temperatures can vary up to 5 degrees inside the Still Air Hova-Bator. However, with the Incubator Warehouse Gentle Flow Fan kit, the incubator holds a more constant temperature, minimizing hot and cold spots. This ultimately leads to improved hatch rates. This model has a mesh screen to support the eggs for a safe hatch. The forced air flow assists with the drying of the chicks after they hatch. This incubator is manufactured of durable Styrofoam that efficiently retains the heat produced by the 25 watt heating element. It also includes two 4x6 inch windows on top for viewing, as well as high sidewalls to keep birds inside when the lid is removed. The reliable wafer thermostat is a proven, accurate technology that produces great hatch results. This incubator can hold approximately 46 chicken, 188 quail, 90 pheasant, and 40 turkey or duck eggs. Additional accessories can be purchased to enhance the hatch rate and overall experience. These include: an automatic egg turner, an Incu-Bright egg candler, and an IncuTherm Plus thermometer/hygrometer. As always, all of our products are covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Incubator Warehouse Hova-Bator incubator for yourself. User Guide [PDF] International Customers This incubator uses 110 Volt AC Power. For international customers (220/240V) please purchase the Incubator Warehouse international power converter to maintain product warranty.

Perfect for kit for anyone incubating reptiles. This kit has been designed to help all of our customers incubating reptile eggs get started. The 1602N is a perfect fit for anyone wanting to incubate reptile eggs. Invented by G.Q.F. Manufacturing Co. over 30 years ago, the Hova-Bator is still the WORLD'S BEST SMALL INCUBATOR and the THERMAL AIR FLOW MODEL, is the most economical incubator available. The radiant heat tube gently warms the inside of the incubator, the air and eggs. Thermal action of the heated air flowing out of the exhaust vents in the top of the incubator, draws fresh air in through the bottom vent. This design includes two small windows on top for viewing. The wafer thermostat is proven, accurate technology that produces great hatch results.

AutoCoop™ LayLight Programmable Coop Light The LayLight is a high efficiency LED light for your chicken coop.  This will provide the extra light your hens need to continue laying eggs into the Winter months.  As daylight decreases, chickens naturally decrease the number of eggs they lay.  To continue laying through the Winter months, they need a little extra light so their internal clock tells them to keep producing.  This light also works to light up your coop on-demand if you need light at night.  Need a timer light for another purpose?  Also works great for sheds, barns or any other area where some light would be helpful.  Features: Super bright, high efficiency, high output LED light Dispersing lens optimizes light distribution Easy-to-program timer (lots of programming options!) Easy to mount Simple plug-n-play set up Also includes manual on/off button on the timer for on-demand light Note: The LayLight is designed to be used inside your coop (or shed, barn, etc) where it will be kept from outside elements (rain and snow).  It is not designed to be used outside the coop and exposed to all weather elements.  Heat and cold are no problem.  But water is a no-no.  Also, the controller for the AutoCoop LayLight looks similar to the AutoCoop Door Opener.  However, they are NOT interchangeable.  The internal electronics are different.  

The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.