Search results for "1":

The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  

Invented by G.Q.F. Manufacturing Co. over 30 years ago, the Hova-Bator is still considered by many to be the WORLD’S BEST SMALL INCUBATOR, and among the most economical incubators available. The circulated air Hova-Bator uses a slower speed, gentle flow fan to hold a more uniform temperature. The gentle flow fan provides enough air movement to keep a constant temperature, but helps prevent dehydration of the eggs. It uses FORCED AIR FLOW, where the radiant heat tube gently warms the inside of the incubator while the fan draws fresh air from the bottom vents and circulates it throughout. Since heat rises, temperatures can vary up to 5 degrees inside the Still Air Hova-Bator. However, with the Incubator Warehouse Gentle Flow Fan kit, the incubator holds a more constant temperature, minimizing hot and cold spots. This ultimately leads to improved hatch rates. This model has a mesh screen to support the eggs for a safe hatch. The forced air flow assists with the drying of the chicks after they hatch. This incubator is manufactured of durable Styrofoam that efficiently retains the heat produced by the 25 watt heating element. It also includes two 4x6 inch windows on top for viewing, as well as high sidewalls to keep birds inside when the lid is removed. The reliable wafer thermostat is a proven, accurate technology that produces great hatch results. This incubator can hold approximately 46 chicken, 188 quail, 90 pheasant, and 40 turkey or duck eggs. Additional accessories can be purchased to enhance the hatch rate and overall experience. These include: an automatic egg turner, an Incu-Bright egg candler, and an IncuTherm Plus thermometer/hygrometer. As always, all of our products are covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Incubator Warehouse Hova-Bator incubator for yourself. User Guide [PDF] International Customers This incubator uses 110 Volt AC Power. For international customers (220/240V) please purchase the Incubator Warehouse international power converter to maintain product warranty.

Keep chickens and game birds from roosting on their water bowls, preventing debris from getting into water. Fits ALL of the Little Giant Founts. Easily attaches to top of the fount with no extra hardware needed. Keep your birds' water fresh with the Little Giant Bowl Guard.

Replacement heater and thermostat for GQF Box Brooders. 110 Volts

Brass, heavy-duty thermostat wafer. 3'' diameter. Temperature range: 70-110°F. Accuracy to approximately 1/2°F +/-. Universal; has threaded stud with nut.

For use in all Box Brooders. Fits through 1 ⅛” hole. Measures from 50°F to 120°F.

12V Hova-Bator with picture window

Replacement humidity wick pads for cabinet model moisture pan. Wick pads are used to raise humidity during hatch period or during setting in arid or high altitude environments. 10 Wick Pads Per Pack

If you’re looking for a reliable yet affordable incubator, look no further. The Hovabator 1602N is a simple, easy-to-use incubator that is relatively low-cost. All these things combined have made this incubator a bestseller. The HovaBator 1602N is the perfect incubator for anyone new to hatching eggs or who wants to save money while still getting the maximum performance out of their incubator. Features: Thermal Air Flow: The 25 watt heat tube gently warms the air inside the incubator, which flows out of the exhaust vents in the top and draws in fresh air through the bottom vent Removable plastic hatching liner that makes after hatch clean-up a breeze Durable styrofoam makes the incubator last longer and retain heat better Two 4x6 inch windows for easy viewing High sidewalls to keep birds inside when the lid is removed Reliable and simple to use wafer thermostat Holds approximately 50 chicken/duck size eggs or 130 quail size eggs without an automatic egg turner Additional accessories can be purchased to improve your hatch rate and your overall experience, including an automatic egg turner, a forced air fan kit, an IncuTherm Plus Thermometer/Hygrometer, and an Incu-Bright egg candler. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Hova-Bator 1602N incubator for yourself. International Customers This incubator uses 110 Volt AC Power. For international customers (220/240V) you must purchase the IncubatorWarehouse.com international power converter to maintain product warranty.

For Cabinet Models 1502 or 1500 3258 Command Center. For replacement of all GQF digital command centers.  Important: Can only be installed in cabinets with an existing 3258 Command Center. Cannot be installed in cabinets without command centers or non-GQF incubators. 3282 SENSOR NOT INCLUDED (Sold Separately) For Cabinet Models 1550 3258 Command Center. For replacement of all GQF digital command centers.  Important: Can only be installed in cabinets with an existing 3258 Command Center. Cannot be installed in cabinets without command centers or non-GQF incubators. 3282 SENSOR NOT INCLUDED (Sold Separately) *The wires coming out the back are different for the 1550 model.   For Cabinet Model 1202E ONLY 3248 Thermostat with Dial

This fan is specially designed for small to mid size incubators.  This Gentle Flow fan is perfect for keeping a uniform temperature and not drying out eggs.  This fan is made with durable ball bearings for long life. Mounting holes on each corner make mounting in your incubator very easy. Just wire into your incubator so the fan is ALWAYS on to keep your small to mid size incubator temperature uniform. 110V AC

Complete lid for GQF 1588 incubators. Includes heater, fan assembly, and digital thermostat with LCD display. Does not include Hova-Bator bottom, liner, or power supply. Will work with previous model 1588 power supplies.

Individual holes minimize waste. Top slides off for easy access and cleaning. Made of heavy gauge galvanized steel and feature rolled edges for safety.

The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.     

Harris Farms® Nurture Right 360 Incubator The Harris Farms® Nurture Right 360 Incubator features built-in LED egg candler. It has a rolling egg turner that simulates hen hatch for higher hatch rates, while an Auto-Stop feature stops turning eggs three days before they hatch. The 360 Airflow induced airflow technology ensures optimal temperatures.Features: Built-in LED egg candler Rolling egg turner simulates hen hatch for higher hatch rates Auto-Stop stops turning eggs three days before they hatch Induced airflow technology for optimal temperatures Includes a humidity sensor/reader Incubator Warehouse Hatching Guide Book - Intro to Hatching This is a printed version of our 4 Part of our Intro to Hatching YouTube Series (see video links below) Illustrated Guide to Hatching Basic introduction to incubating eggs and brooding chicks Product has references to our products but is overall very educational and informational 28 Pages YouTube Video Series Intro to Hatching Part 1/4: Setup https://www.youtube.com/watch?v=MqnbL8qTvaI&t Intro to Hatching Part 2/4: Incubation Period https://www.youtube.com/watch?v=vq8NvC2mH0U&t Intro to Hatching Part 3/4: Hatching Period https://www.youtube.com/watch?v=e3JzvNvvRpU&t Intro to Hatching Part 4/4: After Hatch https://www.youtube.com/watch?v=L7gtp3QQWgY&t Incubator Warehouse EZ-Clean Chick Brush for Cleaning Incubators & Eggs Cute Chick Brush for cleaning incubator or Eggs. 3 in x 4 in Incubator Warehouse IncuBright Egg Candler One of the most exciting parts of incubating eggs is being able to watch the embryo progress during the various development stages. The Incu-Bright™ egg candler makes this joy possible by providing an easy and effective way to candle your eggs. It was designed specifically for candling eggs while keeping affordability in mind. The IncuBright uses the latest in LED light technology. One super bright CREE bulb illuminates your eggs for easy viewing, even with dark or large eggs. The Incu-Bright™ has the only universal silicone rubber egg protector ring that lets you candle any size egg. The IncuBright™ is cordless, making it easy use. Batteries are included. EZ Incubator Water Trough Filler The EZ Incubator Water Trough Filler makes the task of adding water accurately to any incubator a breeze. No more spilling water, overfilling, or guessing where your water will go. Poultry/Bird Feeder & Waterer Kit The Incubator Warehouse feeder and waterer kit provides you with the essential supplies to feed and water your new birds after they hatch: 1- Double-Tuf 1.5 quart poultry waterer 1- Double-Tuf 1.5 lb. poultry feeder 1 - Pack of waterer stones - reflective color attracts birds 1 - Packet of poultry electrolyte 1 - Pack of high protein starter food - not included for shipments outside of US & Canada 1 - Set of feeding instructions for birds Two Year IncuCare Warranty Incubator Warehouse Insta Brooder™ with Vrooder™ Heater Plate The New Incubator Warehouse Exclusive Insta Brooder Pen is here and answers all your needs for a durable bird brooder! Fully enclosable with a removable mesh top ensures as your birds grow you can keep the top closed to ensure they do not escape and stay safe in their pen. The mesh roof ensures you never lose sight of them and can see everything happening in the brooder pen. A Velcro section in one bottom corner allows the Vrooder™ Brooder Heater Plate power cord to run out of the pen and keeps your birds from getting out. The Vrooder™ simulates a mother hen keeping her chicks warm and cozy under her feathers. Keeping a constant temperature, using an integrated thermostat and heater the Vrooder can accommodate up to 30 chicks. As your chicks grow, simply raise the heat plate with the easy-to-adjust thumbscrews without needing to remove the heat plate from your brooder. Comes with 2 disposable liners made to fit inside the unit and is textured to provide firm footing for your newly hatched chicks. These disposable drop pan paper board liners catch all your bird dropping and allow you to remove when the floor gets too dirty and covered in droppings. Made from a durable material the Insta Brooder pen can be washed off in the yard to remove any remaining dropping residue after your birds have been moved to their coop/cage. Please allow proper amount of time for the pen to dry before packing up to avoid mildew and mold growth and damage to your Insta Brooder pen. Once dry simply collapse and fold up and slide into its storage bag until your next hatch. Insta Brooder Pen Dimensions: 36 X 36 X 18 in. Vrooder Dimensions: 14.5" x 14.5" x 12.5", Accommodates up to 30 baby chicks, Power Spec: 110V AC, 40 Watts. NOT INTENDED FOR USE OUTDOORS (Garage/Barn are ok if temperatures do not drop below 25 degrees Fahrenheit) Incubator Warehouse's 2 year IncuCare Warranty