Search results for "hova-bator":

Product Features: Set of 6 Quail Rails: Holds 120 small eggs (20 per rail). Perfect Fit: Designed exclusively for the Little Giant automatic egg turner. Durable Build: Made from high-quality, dishwasher-safe plastic for easy maintenance Easy to Install: Swaps right into your Little Giant automatic egg turner with no hassle. Versatile Use: Suitable for quail, dove, finch, and other small eggs. 2-Year IncuCare Warranty. Product Description: If you're into raising quail or other small birds, you know how tricky it can be to incubate their tiny eggs properly. That's where the Little Giant quail rails come in. Designed to fit perfectly with the Little Giant Automatic Egg Turner, these rails make it easy to hatch quail and other small eggs without the hassle. This includes a set of six quail rails, each holding 20 small eggs, giving you a total capacity of 120 eggs at once. That's a lot of quail chicks in the making. The rails are designed to cradle each egg securely, keeping it upright for proper air circulation and even incubation. This setup helps reduce the risk of cracked or damaged eggs, which is especially important when dealing with fragile quail eggs. Installing the rails is super simple. No tools are required; just snap them into your Little Giant automatic egg turner. They're designed to replace the standard chicken egg racks, so it's a quick swap that gets you back to incubating in no time. Incubation can get messy. That's why these quail rails are made from durable, dishwasher-safe plastic. When cleaning up, just pop them out of the turner and throw them in the dishwasher—no scrubbing, no fuss. They're tough enough to handle regular cleaning without warping or breaking, so you can use them season after season. These quail rails provide flexibility for various small egg species. They are perfect for: Quail eggs Dove eggs Finch eggs Other similarly sized small bird eggs Pair your Little Giant quail rails with other incubation accessories like: The Egg-O-Meter to monitor egg temperatures The IncuTherm Plus Hygrometer/Thermometer to keep track of humidity and air temp The Incu-Bright Egg Candler to check embryo development Before you order, here are a few key details to keep in mind: This set includes six quail rails ONLY. The automatic egg turner is NOT included. It's not compatible with Hova-Bator Egg Turners. These rails are designed specifically for the Little Giant Automatic Egg Turner. Don't miss out on enhancing your quail hatching process. Order your Little Giant quail rails now.

Product Features: Complete Replacement Kit: Includes a wafer thermostat, wing nut, adjustment screw, and a new taller mounting bracket for enhanced performance. Precise Temperature Regulation: The thermostat wafer expands and contracts with temperature changes, ensuring stable heat regulation inside your incubator. Upgraded Bracket Design: Improved height for better stability and easy mounting. Compatible with GQF Incubators: Specifically designed to work with GQF Analog Cabinet Incubators and Brooders, making it an easy replacement for outdated or damaged components. Easy to Install & Adjust: Simple screw adjustments let you fine-tune the temperature with minimal effort. Product Description: Maintaining the perfect temperature inside an incubator is crucial for successful hatching. This Thermostat Wafer Kit directly replaces GQF models 3007 & 3010, ensuring accurate and consistent temperature regulation in analog cabinet incubators and brooders. Whether you're incubating poultry, reptiles, or exotic bird eggs, this thermostat wafer provides precise control over temperature fluctuations, leading to higher hatch rates and improved incubation success. If you're experiencing temperature instability, difficulty adjusting heat levels, or outdated incubator parts, this premium replacement kit is the solution you need. What's Included in the Kit? This complete incubator thermostat wafer kit includes: 1 x Thermostat Wafer – Expands and contracts with temperature changes to provide accurate heat control. 1 x Adjustable Screw – Allows for fine-tuning temperature settings for optimal incubator performance. 1 x Wing Nut – Ensures a secure fit for easy installation and adjustment. 1 x Taller Mounting Bracket – Designed for better compatibility and improved performance over older models. This all-in-one kit makes replacing your incubator's thermostat wafer quick, easy, and hassle-free. How Does the Thermostat Wafer Work? The thermostat wafer is a simple but highly effective device in many incubators. It operates using a natural expansion and contraction process: When the incubator heats up, the wafer expands, triggering the adjustment screw to reduce heat output. When the incubator cools down, the wafer contracts, allowing the heating element to turn on again. This cycle ensures consistent temperature control, which helps for proper embryo development and a successful hatch rate. Unlike digital thermostats that use sensors, the wafer system works mechanically and is reliable. That's why both breeders and hobbyists prefer it. Why Upgrade to This Thermostat Wafer Kit? The wafer thermostat is a crucial component in any incubator. It controls the internal temperature by expanding and contracting with heat changes. Over time, older wafers lose sensitivity, leading to temperature fluctuations that can negatively impact hatching rates. By replacing outdated models 3007 & 3010 with this new and improved kit, you benefit from: More precise temperature control for higher hatch success. Increased durability for long-term performance. Improved performance with the taller bracket upgrade. Step-by-Step Installation Guide Remove the old thermostat wafer from your incubator. Attach the new mounting bracket securely. Insert the new thermostat wafer and fasten it with the wing nut. Adjust the screw to fine-tune temperature settings. Test your incubator to ensure the correct heat levels are maintained.   A faulty thermostat wafer can ruin a hatching cycle. Don't take the risk. This thermostat wafer kit ensures your incubator runs smoothly, providing the perfect conditions for healthy hatchlings. Order Now.

Product Features: Wide Compatibility: Fits models 6300, 6200, 3200, 1610, 1611, 1612, 1614, and more. Precise Egg Turning: Completes a full rotation every 4 hours. Simple Installation: Easy to mount with pre-drilled holes and flexible for DIY setups. Durable Design: Made with high-quality materials for long-lasting use. Efficient Operation: Runs on 110V AC power and a long power cord, with low power consumption. Warranty: 2-Year IncuCare Warranty. Product Description: If you're searching for a reliable replacement for your egg turner motor, you've found it. Whether you're using a trusted brand like HovaBator, Little Giant, Farm Innovators, or a custom-built incubator, this IncuTurn™ egg turner motor has you covered. This motor's smooth operation, easy installation, and compatibility with multiple models ensure that your eggs are turned consistently and gently. That means happier hatchlings and less stress for you. It fits like a glove; there is no guesswork here. This motor fits popular egg turner models like Little Giant 6300, 6200, Farm Innovators 3200, and HovaBator 1610, 1611, 1612, and 1614. Plus, it's perfect for DIY enthusiasts who build their own incubators. Technical Specifications: Voltage: 110V AC Compatibility: 6300, 6200, 3200, 1610, 1611, 1612, and 1614 Models Mounting Type: Compatible with HovaBator, Little Giant & Farm Innovators Rotation Speed: 1 rotation every 4 hours The motor operates at a slow, steady pace to mimic natural egg movement. It completes one full rotation every 4 hours, while eggs pass their starting position every 2 hours. This slow turning prevents eggs from sitting still too long, helping embryos develop properly. It's gentle enough to handle all kinds of eggs, ensuring even the most delicate ones are treated with care. Made from high-quality materials, this motor is built to last. It's tough enough to handle long periods of use without losing performance, so you can trust it to keep your eggs moving daily. The motor runs on 110V AC power, offering stable and consistent operation. Plus, the long power cord makes it easy to position the motor wherever needed. With universal mounting holes, this motor is simple to install in your current incubator or a homemade one. Just plug it in, attach it, and you're ready to go. Your purchase includes a 2-year IncuCare Warranty, so you can rest easy knowing you're covered if any issues arise. How to Install the IncuTurn™ Egg Turner Motor Unplug the Incubator: Safety first. Ensure the incubator is powered off and disconnected from any electrical source. Remove the Existing Motor: Unscrew or unmount the old motor from your egg turner. Align the Replacement Motor: Match the mounting holes on the motor with those on the egg turner for a perfect fit. Secure the Motor: Use screws or mounting brackets to attach the motor firmly. Plug It In and Test: Power up your incubator and watch the motor in action. Don't let a faulty motor ruin your hatching plans. Give your chicks the best start in life. Order the IncuTurn™ egg turner motor now and experience the difference in quality and performance. After all, every life deserves a strong beginning.

Replacement Fan/Heater Unit for GQF 2370 Tabletop Incubator with Orange Connector (Newer Style)

Set of 4 heat element clips

Plastic Connecting Bar/Egg Racks to Motor. Replacement part for all HovaBator Egg Turners