Search results for "egg incubators":

Product Features: Hatching Substrate (9 oz): A special, bacteria-resistant medium designed to help keep your eggs safe and healthy. 4 Medium Bowls (350ml/12 fl oz): Durable bowls with built-in ventilation holes for airflow, perfect for maintaining humidity. Ventilated Lids: Keep the environment controlled while allowing you to check on the eggs easily. Simple Instructions: Easy-to-follow steps to get everything set up quickly. 2-Year Warranty: Backed by our trusted IncuCare Warranty. Product Description: When you're hatching reptile eggs, you need the right tools to create the perfect environment. That's where the Reptile Egg Incubation Substrate Accessory Pack  comes in. Whether you're a first-timer or a seasoned reptile breeder, this accessory pack makes hatching eggs easier, safer, and more successful. When it comes to reptile egg incubation, the substrate is everything. Too much moisture and your eggs could rot. Too little, and they'll dry out. That's why this substrate is a game-changer. It strikes the perfect balance while preventing mold and bacteria from forming. The included hatching medium/substrate is specially formulated to prevent mold and bacteria growth, which are two of the biggest risks to successful hatching. The substrate holds moisture perfectly, creating an ideal environment for reptile eggs. It's clean, efficient, and far better than traditional materials like sand or soil. The bowls are perfect for holding the substrate and reptile eggs. The lids have pre-drilled ventilation holes to maintain the airflow and humidity levels your eggs need. Plus, the bowls are clear, so you can easily watch your eggs without opening them and disrupting the environment. Their durable design ensures they can be reused, making this a cost-effective and sustainable solution for future hatching projects. This pack is perfect for anyone looking for a budget-friendly solution that doesn't compromise on quality. With detailed instructions, even first-time breeders can easily set up and manage their incubation process.   Step-by-Step Setup: Moisten the Substrate: Add a small amount of water to the hatching medium until it's slightly damp but not soggy. Fill the Bowls: Divide the substrate evenly between the bowls. Leave enough room for the eggs to sit comfortably on top. Place the Eggs: Carefully place the reptile eggs in the substrate. Make sure they don't roll around. Secure the Lids: Snap the ventilated lids onto the bowls to maintain the right humidity level. Monitor and Wait: Place the bowls in your incubator and check the eggs periodically until they hatch. That's it. With this kit, you're set up for success from the start. Incubator Warehouse has been a trusted name in incubation supplies for years. Our reptile egg incubation accessory pack embodies our commitment to quality, innovation, and customer satisfaction. With a focus on improving hatch rates and simplifying the hatching process, this product is a must-have for any reptile enthusiast. Order now and take the first step toward nurturing healthy, happy reptile hatchlings.

This is a Brand New Sammax style thermostat that works GREAT in an incubator! Included with purchase:    * Thermostat with a temperature range of 80-115 F (Long 1.5" shaft can go through thick styrofoam walls)    * Screw nut that screws onto the thermostat shaft to help attach to a surface or panel    * 15A rating    * Can be used with either AC or DC applications    * Comes with a wiring diagram for wiring in a fan and a heaterCaution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protecting screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!

This replacement fan is compatible with the Maticoopx 30 egg incubator. Easy installation with only a standard Phillips head screwdriver. Get your Maticoopx running again!

Looking for a reliable way to automate your egg turning? The Egg Turner Motor for DIY Cabinet Incubator 110V is designed to provide consistent, high-torque performance, making your incubation process smooth and stress-free. Product Description This powerful egg turner motor is built for cabinet incubator applications, offering an impressive 60 lbs/in of torque to handle a wide variety of egg turner designs. With a rotation speed of 1 RPM, it ensures safe and gradual turning of eggs, while the programmable timer prevents over-rotation. Designed with a D-shaped shaft and linkage hole, it makes setup easy for both beginners and experienced incubator builders. Product Features Strong 60 lbs/in torque for reliable egg turning 1 RPM speed ensures gentle, consistent rotation A programmable timer prevents overturning. DIY-friendly design with D-shaped shaft & linkage hole Runs on standard 110V AC power Technical Details Voltage: 110V AC Speed: 1 RPM (1 revolution per minute) Torque: 60 lbs/in Shaft Type: D-shape with hole for linkage Additional Information Compatible with most DIY and cabinet incubator designs Easy to install and maintain Includes a timer for precise egg turning Ideal for small farms, poultry breeders, and hatcheries Make Egg Turning Hassle-Free Today Upgrade your incubator today with this durable egg turner motor—built for reliability, backed by warranty, and ready to make your hatching process easier!

About this item Looking for precise temperature control for your hatching setup? This digital incubator thermostat is designed to maintain consistent heat, ensuring optimal conditions for eggs, reptiles, or other temperature-sensitive environments. Whether you’re raising chicks, quail, or even reptiles, this thermostat for egg incubators offers reliable performance with minimal setup. With its built-in temperature sensor, this incubator thermostat with sensor ensures accurate readings and quick adjustments. Ideal for DIY incubators or replacing older controls. Product Description The Digital Electronic Egg Incubator Thermostat is a compact and efficient temperature controller made specifically for incubation. It’s ideal for poultry, reptiles, and small-scale hatchery setups. This reptile incubator thermostat is easy to wire and program, making it a great choice for both beginners and experienced hobbyists. This unit works by turning your heat source on or off to maintain your set temperature. The digital display shows current temps clearly, while the sensor accurately reads real-time changes. It's compatible with heating elements like light bulbs, heat tape, or ceramic heaters, making it incredibly versatile. Whether you're building a homemade egg incubator or need a dependable controller for reptile breeding, this thermostat ensures peace of mind with every hatch. Product Measurement Thermostat Unit Size: 4.75" x 2.25" x 1.75" Sensor Cable Length: Approx. 39" (1 meter) Temperature Range: 0–110°C (32–230°F) Display Type: Digital LED Technical Details Power Supply: 110V AC (Standard US Plug) Max Load: 1,000 Watts Accuracy: ±1°C Sensor Type: Waterproof NTC temperature sensor Control Type: On/Off switch control Heating Only (no cooling function) Additional Information Great for poultry hatchers, DIY projects, or pet reptile enclosures Simple wiring with labeled terminals Clear digital display with temperature readout in °C Lightweight and compact design for easy installation Warranty & Support We stand behind the quality of our products. This digital incubator thermostat includes a 6-month limited warranty against manufacturing defects. Our U.S.-based support team is available to help with setup, troubleshooting, or any product questions you may have. For extended support or installation tips, visit our help center at Incubator Warehouse.  

When it comes to the smooth operation of your Rcom incubators and brooders, a reliable power source is crucial. The 3 prong power cord is designed to keep your incubator running without interruptions, providing a secure and consistent connection. Whether you're hatching eggs or caring for your brooders, this high-quality replacement cord ensures you never have to worry about power issues again. Product Description: Ensure uninterrupted power for your Rcom incubators and brooders with this 3 prong power cord. At 6 feet long, it offers the perfect length for flexible use, making it easy to set up and move around your workspace. Designed for safe and reliable performance, this power cord guarantees that your incubator stays powered, keeping your hatching process on track. Product Features: Perfect Fit: Designed specifically for Rcom incubators and brooders. Durable: The cord is built to last, ensuring reliable performance. Length: Measures 6 ft for flexible use and easy setup. Safe Use: 3-prong plug provides a secure connection to your incubator. Versatile: Compatible with other appliances that require a 3 prong power cord. Technical Details: Type: 3-Prong Power Cord Length: 6 ft (1.83 meters) Voltage Rating: 125V Current Rating: 10 Amps Connector Type: 3-Prong Male Plug to Appliance Socket Compatibility: Designed for Rcom Incubators and Brooders; also works with other appliances requiring a 3-prong connection. Material: High-quality, durable insulation for enhanced safety Certifications: UL Listed for safety compliance Why Choose This Power Cord? When it comes to keeping your incubator running smoothly, the right power cord is essential. Here's why our 3 prong power cord stands out: Reliable Performance: You need a power cord that you can trust, and this one ensures consistent power to your incubator, helping maintain ideal conditions for hatching. Easy to Install: No complicated setup—plug it in, and you're ready to go. Safety First: With its 3-prong design, this power cord offers an added layer of protection for both your equipment and yourself. Built to Last: Made with high-quality materials, it is durable enough to withstand daily use without wear and tear. Ensure your incubator gets the power it needs. Order this 3 prong power cable today! Next Steps: Keep your incubator running smoothly without interruptions. Grab your 3 prong power cord now and enjoy reliable, long-lasting power. Click "Buy Now" to get the perfect solution for your Rcom incubator today!  

Product Features: Powerful Air Circulation: Spreads heat evenly inside the incubator. Durable Ball Bearings: Long-lasting performance with less maintenance. Easy Installation: Four corner-mounted holes make mounting simple and secure. Energy Efficient: Uses only 0.25 Amps and 22 Watts, reducing power consumption. Compact & Versatile: Ideal for cabinet incubators and other ventilation needs. Reliable Power: Runs on 220V AC with airflow of 80-105 CFM Includes 2-Year IncuCare Warranty. Product Description: Keeping the right temperature and humidity in your incubator is key for successful hatching. This 220V AC incubator fan for the cabinet egg incubator provides consistent airflow. It helps to move air evenly, keeping the temperature the same everywhere. This stops hot or cold spots that could harm egg development. This fan has high-quality ball bearings for long life and smooth use. Unlike sleeve-bearing fans, which wear out quickly, and can only be installed in one direction, ball-bearing fans last longer and need fewer replacements. This saves money, making it a smart choice for those who rely on their incubators for continuous hatching cycles. With its pre-drilled mounting holes in each corner, installing this egg incubator fan is easy. Whether you're adding a new fan or upgrading, you can attach it in a few quick steps. Just connect the wires to keep air circulating all the time. Technical Specifications Voltage: 220V AC Airflow: 80-105 CFM (Cubic Feet per Minute) Power Consumption: 22 Watts Current: 0.25 Amps Bearing Type: Ball Bearings Mounting: Four corner holes for secure installation   This axial fan is specifically made for cabinet egg incubators. It keeps the temperature steady for better hatching and spreads heat evenly, ensuring every egg gets the proper heat and ventilation. Need a 110V Version? No worries if you're outside the U.S. or need a different power setup. We also offer a 110V version. Check our store for more details. Don't let poor airflow ruin your hatch rates. Order now to give your eggs the best possible incubation environment.  

Product Features: Powerful Air Circulation: Spreads heat evenly inside the incubator. Durable Ball Bearings: Long-lasting performance with less maintenance. Easy Installation: Four corner-mounted holes make mounting simple and secure. Energy Efficient: Uses only 0.25 Amps and 22 Watts, reducing power consumption. Compact & Versatile: Ideal for cabinet incubators and other ventilation needs. Reliable Power: Runs on 110V AC with airflow of 80-105 CFM Includes 2-Year IncuCare Warranty. Product Description: Keeping the right temperature and humidity in your incubator is key for successful hatching. This 110V AC incubator fan for the cabinet egg incubator provides consistent airflow. It helps to move air evenly, keeping the temperature the same everywhere. This stops hot or cold spots that could harm egg development. This fan has high-quality ball bearings for long life and smooth use. Unlike sleeve-bearing fans, which wear out quickly, and can only be installed in one direction, ball-bearing fans last longer and need fewer replacements. This saves money, making it a smart choice for those who rely on their incubators for continuous hatching cycles. With its pre-drilled mounting holes in each corner, installing this egg incubator fan is easy. Whether you're adding a new fan or upgrading, you can attach it in a few quick steps. Just connect the wires to keep air circulating all the time. Technical Specifications Voltage: 110V AC Airflow: 80-105 CFM (Cubic Feet per Minute) Power Consumption: 22 Watts Current: 0.25 Amps Bearing Type: Ball Bearings Mounting: Four corner holes for secure installation   This axial fan is specifically made for cabinet egg incubators. It keeps the temperature steady for better hatching and spreads heat evenly, ensuring every egg gets the proper heat and ventilation. Need a 220V Version? No worries if you're outside the U.S. or need a different power setup. We also offer a 220V version. Check our store for more details. Don't let poor airflow ruin your hatch rates. Order now to give your eggs the best possible incubation environment.

Product Features: Compatibility: Ideal for use with Hova-Bator Egg Incubators. 25W Heating Power: Ensures efficient heat for your incubation needs. 110V AC: Standard voltage for reliable performance. DIY Use: Can be used for custom DIY egg incubator setups. Clips Not Included: Clips needed for installation are available as a separate purchase. Easy Installation: Simple to replace or install in your existing incubator. Includes our 2-year IncuCare Warranty. Product Description: Ensure optimal egg-hatching conditions with this 25-watt heating element designed specifically for the Hova-Bator Egg Incubator. Whether you're replacing a worn-out part or building your own DIY egg incubator, this high-quality heating element is perfect for ensuring reliable and consistent temperature control. Operating on 110V AC power, it delivers efficient and stable heat to maintain the ideal environment for successful incubation. This heating element is compatible with Hova-Bator Egg Incubators, and it's designed to fit seamlessly into your existing system. Over time, the heating element in any incubator can lose efficiency, and this replacement part ensures that your incubator continues to perform at its best. It provides the necessary warmth to promote healthy embryo development during the incubation period. This heating element is an excellent option for building a DIY egg incubator. Its versatility means it can be used in any custom incubator design, offering reliable heating for those who prefer to construct their setup from scratch. This high-quality, durable component ensures longevity for multiple hatching cycles. Please note that the mounting clips required to install the heating element are not included but can be purchased separately. This heating element is an excellent choice for replacing an old or broken heating element or for any DIY project requiring reliable heat to incubate eggs. Achieve higher hatching success with this dependable replacement part that ensures precise temperature regulation for your incubator. By choosing this heating element, you're investing in quality and performance.  

Product Features:   Accurate Electronic Thermostat: Delivers precise temperature control for optimal incubation. Circulated Air Incubator: Circulated air technology ensures uniform heating throughout the incubator. Durable Styrofoam Insulation: Provides excellent heat retention for energy-efficient performance. Digital Display: Bright, easy-to-read display that shows temperature in Celsius or Fahrenheit. Washable Plastic Liner: Sanitary and easy-to-clean design for hassle-free maintenance. Humidity Control: Built-in water channels allow for precise humidity regulation. Product Description: Experience precision and ease with the Electronic Thermostat Hova-Bator Incubator. This advanced incubator is designed for poultry and reptile enthusiasts alike and delivers exceptional accuracy and versatility. It features a bright, easy-to-read display and supports temperature adjustment between Fahrenheit and Celsius for your convenience. With its circulated air system and optional fan shut-off for reptile egg incubation, it’s tailored to meet diverse needs. This incubator includes dual 4x6-inch viewing windows, allowing you to monitor the incubation process without disturbing the eggs. High side walls provide safety by keeping birds inside when the lid is removed. Crafted for efficiency, it offers capacity for approximately (Without an egg turner): 46 chicken eggs 188 quail eggs 90 pheasant eggs 40 turkey or duck eggs Enhance Your Hatch Rates: Maximize your success with optional accessories (sold separately): Automatic Egg Turner: Save time and ensure even incubation. Incu-Bright Egg Candler: Quickly check egg development. IncuTherm Plus™: Keep track of temperature and humidity levels for ideal incubation conditions. Built to Last: Energy Efficient: Operates on 110 Volt AC, consuming just 30 watts. One-Year Hassle-Free Guarantee: Shop confidently, knowing our reliable warranty backs you. Order today and experience the superior performance of the Hova-Bator incubator, trusted by enthusiasts worldwide. Whether you’re hatching chickens, reptiles, or exotic birds, this incubator is designed to deliver exceptional results every time.

Take the performance of your cabinet-style incubator to the next level with a Turner Motor Assembly (Part Number 3175). Engineered for models that use the 3258 digital command center, this motor puts you in control of your egg turning, making the incubation and hatching process easier. No matter how long you’ve been digging into incubation, a peace of mind comes from eating out of this motor assembly. Product Description: When it comes to hatching success, precision and reliability are crucial, and the Turner Motor Assembly (3175) delivers both. Product Details: This Forced Air Fan Kit is designed to work with our 3258 Digital Command Center and provides forced air to the eggs. When used in an incubator, adding this fan kit can lead to improvements in hatch rates and egg hatchability. The industrial-strength galvanized steel brackets are guaranteed to last and contain no prior exposure to elements such as humidity; pre-wired snap-on connectors make installation easy. Ideal for poultry farms, backyard breeders, and educational environments, this motor assembly is designed to provide continuous turning for optimal hatch rates. Protected by our 2-year IncuCare Warranty, this incubator is designed to last and ensure optimal performance. Product Features: Perfect Replacement: Fits the model with the 3258 Digital Command Center, featuring a plug-and-play design. Trustworthy and Durable: The 110V motor provides stable rotation during hatching time, ensuring healthy movement for all. Strong Build: Solid galvanized brackets can withstand both desert dry heat and tropical humidity. Simple Installation: Comes with pre-wired connections for quick and straightforward setup, making it ideal for both hobbyists and commercial hatcheries. Increases Hatch Rates: The incubator enables eggs to be turned on a more regular basis, as the mother hen does. Increasing by 10% - 20% hatch rate. Technical Details: Model Number: 3175 Voltage: 110 VAC Compatibility: For use on cabinet incubators with the 3258 Digital Command Center Brackets Included: Yes(Original brackets are used for single-fan models) Additional Information: Fitment Note: If you will be using a single-fan hatcher, keep and reuse the original galvanized brackets for mounting the shaking motor. For use with: incubator projects, poultry egg incubators, science projects, ventilation for computer and audio equipment, and even gerbil exercisers. Installation: Includes pre-installed wiring and clear, easy-to-follow instructions for setup. Warranty: Get a 2-Year IncuCare Warranty- and have peace of mind knowing your Turner Motor Assembly will last. Your investment is supported by our strong service team, who ensure your hatch gives you peace of mind. Order Now! Keep your incubator running smoothly with this Turner Motor Assembly (Part Number 3175). Basically, Better Hatch Rates، Healthier Chicks Depend on Uniform، Consistent Performance. Backed by a 2-year warranty and simple installation, it's time to upgrade to success.