Search results for "eggs":

This Egg Turner Motor is perfect for cabinet egg incubator applications, providing very high torque (60 lbs/in) it can easily turn a variety of egg turner designs. The motor is 1 RPM (makes 1 revolution per minute), so it is best used with a timer to prevent overturning your eggs. This motor works great with the IncuKit XL Advanced because they have built-in egg turner timer controls.  The motor shaft has a D shape and also a hole through the shaft for easy egg turner linkage.  110V AC Power.

Removing the hatching tray allowed us to space the trays further apart and have them turn to a steeper angle. The No. 1500 is exempt from use as a hatcher allowing it to avoid the mess associated with hatches and remain clean. This incubator only has to maintain one humidity setting making it easier on the eggs and easier to operate. The “PROFESSIONAL” is designed to be used with the No. 1550 HATCHER. We recommend purchasing the two together. Up to three No 1500’s can be used with one hatcher for a weekly production of chicks from a laying flock. The No. 1500 incubator offers an accurate digital thermostat with LCD display of Temperature and Humidity. An on-board computer monitors systems and the environment every second to keep itself updated and to share this data with you. Electronic egg turning control, audio/visual indicators and a standard easy view door highlight a number of features. Constructed from high strength plastic board making it well insulated, quieter, and easier to clean. Each unit is hand assembled by our skilled craftsmen and tested for a full 24 hours for proper operation and calibration. Thermostat operating range between 60 and 103 degrees F. depending on room temperature. 110-120VAC, 50/60 Hz, 325 Watts TUV Listed This incubator includes: 1 #3258 Digital Command Center thermostat 3 turning racks 1 moisture pan with 2 wick pads Instruction booklet Total Capacity with plastic trays (sold separately): 1368 Quail Eggs (set and hatch 250 per week), 354 pheasant eggs, 270 chicken eggs, 198 turkey or duck eggs, and 36-45 larger eggs such as goose, peafowl, and emu. Actual capacity may depend on egg size. DIMENSIONS: 30 1/4” Front to Back, 15 3/4” Wide, 31 3/4” High. PLASTIC EGG TRAYS SOLD SEPARATELY 1243 (Quail), 1245 (Pheasant), 1246 (Chicken), 1248 (Duck/Turkey)

New Electronic Thermostat Hova-Bator. Circulated air. The new thermostat is very accurate with a bright, easy to read display. 110 Volt AC 30 Watts. Temperature can be changed from Fahrenheit to Celsius. Fan can be turned off for incubating reptile eggs. This incubator also includes two 4x6 inch windows on top for viewing, as well as high sidewalls to keep birds inside when the lid is removed. This incubator can hold approximately 46 chicken, 188 quail, 90 pheasant, and 40 turkey or duck eggs. Additional accessories can be purchased to enhance the hatch rate and overall experience. These include: an automatic egg turner, an Incu-Bright egg candler, and an IncuTherm Plus thermometer/hygrometer. As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the IncubatorWarehouse.com fan installed Hova-Bator incubator for yourself.

Frame for Hova-Bator turner only. Racks and motor not included.

The LayLight is a super bright, high-efficiency, and high-output LED light for your chicken coop. This will provide the extra light your hens need to continue laying eggs into the Winter months. As daylight decreases, chickens naturally decrease the number of eggs they lay. To continue laying through the Winter months, they need a little extra light so their internal clock tells them to keep producing. The dispersing lens optimizes the light distribution to help light the entire coop up. Easy to mount so can place it and set it up quickly. Backed by our 2-Year IncuCare Warranty. Diameter: 2 3/8 inches   SEE OUR VIDEO: https://youtu.be/j4O_jExIrEE  

Incubator Warehouse's Digital Electronic Egg Incubator Thermostat Description: This thermostat is very simple to use.  Just press the up arrow to set the temperature (in 0.1 degree increments).  There is a flame indicator on the screen that shows when the heater is operating.  The unit has an 18 inch remote sensor that is placed inside the incubator.  The white thermostat case is then mounted on the outside of the incubator.  Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Thermostat set point can be adjusted to any temperature between 41 - 113 degrees Fahrenheit Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) Select your voltage above in the drop down box (220/240V AC ONLY).  220/240V AC is for most places outside of North America. Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7.  NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should.  As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine!  This is true with any incubator and egg configuration.  Calibration Enabled.  This means that you can calibrate the thermostat to a specific temperature.  For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds). Product Instructions: IncuStat™ Basic

One of the common hassles with incubation is maintaining the humidity inside the incubator. These hassles include the need to frequently fill the water reservoirs or not being able to maintain the desired humidity. We are proud to introduce the HumidiKit automatic humidity system for egg incubators. This system is designed to instantly deliver accurate humidity to most incubators. The integrated digital hygrostat that measures and controls the humidity is fully adjustable so you can achieve the humidity range that is right for your eggs. The humidifier is designed to gently provide instant humidity and fresh air directly inside the incubator for an accurate humidity range. The humidifier also comes with a one liter bottle which typically needs to be filled once a week for most desktop incubators. To extend the life of your humidiKit we recommend using distilled water. This unit comes ready to install into your incubator; simply place the probes from the HumidiKit inside the incubator, insert the hose into a vent hole, fill the water bottle, and connect to power. The HumidiKit is also covered by the IncubatorWarehouse Two-Year IncuCare Warranty so you can purchase with confidence.