A good hatch rate for chicken eggs is about 80% of the eggs you set, or roughly 8 in 10. Beginners often hatch 60–75%, and hatcheries aim for 95% of fertile eggs. When your hatch rate falls below that, the cause is almost always temperature, humidity, egg storage, turning, fertility, or a dirty incubator. This guide explains what hatch rate means, how to calculate it, and how to fix each cause.
Hatch rate = healthy chicks hatched ÷ eggs set × 100. Benchmark sources are the University of Missouri Extension and ThePoultrySite.
What is a good hatch rate for chicken eggs?
It depends on how you measure it. Hatch of eggs set counts every egg you put in the incubator. Hatch of fertile counts only the eggs that were fertile, so it removes flock fertility from the result.
| Measure | Formula | What counts as good |
|---|---|---|
| Hatch rate (hatch of eggs set) | Chicks hatched ÷ eggs set × 100 | About 80% at home. Beginners often get 60–75%. |
| Hatch of fertile | Chicks hatched ÷ fertile eggs × 100 | 85–95% in ideal conditions. Hatcheries target 95%. |
- Beginners: 60–75% is common in the first few hatches while you learn to control temperature, humidity, and turning.
- Experienced hatchers: higher and steadier numbers from testing equipment, checking eggs and following a routine.
- Normal variation: room temperature, weather and eggs from different hens move results a few points from batch to batch.
- Consistently low: if every batch is low, look for a fixed problem in the incubator, storage, or handling.
Most embryo deaths happen in the first and last weeks of incubation, according to University of Missouri Extension. Candling on days 7 and 14 tells you which week lost the eggs; see our egg candling guide.
How to calculate your hatch rate

Count healthy chicks, not just eggs that cracked. To find the number of fertile eggs, candle on days 7–10 and break open the clear eggs to confirm they were infertile and not early deaths.
| Eggs set | Infertile | Chicks hatched | Hatch rate (eggs set) | Hatch of fertile |
|---|---|---|---|---|
| 12 | 1 | 9 | 75% | 82% |
| 50 | 5 | 38 | 76% | 84% |
| 100 | 10 | 80 | 80% | 89% |
In the 50-egg example, 38 ÷ 50 × 100 = 76%, and 38 ÷ 45 fertile eggs × 100 = 84%. Keep a log of every batch so you can compare results.
Why hatch rates drop: the 8 most common causes
Hatch rates drop when something changes in the incubator, the eggs or the room. Check these causes in order.
1. Temperature is off

Temperature is the most important variable. Set a forced-air incubator to 99.5°F (37.5°C) and hold it steady. Overheating can kill embryos: University of Missouri Extension reports that 105°F for 30 minutes can seriously harm or kill them. Cold eggs develop slowly, hatch late, or stop developing. Verify the built-in display with a separate thermometer, and do not set the incubator in sun or drafts.
2. Humidity is wrong
Humidity controls how much water an egg loses. Keep it at 45–55% until lockdown, then raise it to 65–70% for the last three days. Too high can leave chicks sticky and stuck in the shell. Too low can shrink-wrap the chick. See our guide to incubator humidity control and check humidity daily with a separate hygrometer.
3. Eggs were stored or handled badly
Set eggs within 7 days of laying. Hatchability falls with age, and storage beyond two weeks hurts it. Store eggs pointed end down in a cool room around 50–60°F. Do not set cracked, misshapen, or heavily soiled eggs, and avoid washing eggs because it removes the protective coating.
4. Turning is insufficient
Without turning, embryos can stick to the membrane. Turn manually at least three times a day, or use an automatic egg turner. Stop turning for the last three days before hatching.
5. Ventilation is poor
Embryos need oxygen. Poor airflow also creates uneven heat and humidity. Keep the vents open as your incubator manual directs, open them further at lockdown, and do not set the incubator in a sealed room.
6. Eggs are infertile or weak
Clear eggs at day 7 point to fertility, not the incubator. Low fertility can come from too many hens per rooster, old or unhealthy breeders, or poor flock nutrition. Weak chicks often trace to breeder diet. Use eggs from healthy, well-fed birds.
7. The incubator or eggs are contaminated
Bacteria and mould grow in warm, humid conditions and can kill embryos. Clean and dry the incubator before and after every hatch, change standing water, wash your hands, and remove clear or dead eggs promptly.
8. Gauges are inaccurate, or the room swings
Built-in thermometers and humidity gauges can be off. Check them against separate calibrated tools and run the incubator empty for 24 hours before setting eggs. Add a min/max reading to catch swings from the room, the season or the time of day.
What your failed eggs are telling you: symptom to cause
| What you see | Most likely cause | Fix |
|---|---|---|
| Clear eggs at day 7 | Infertile eggs, or very early death | Check rooster ratio, breeder age, and nutrition; store eggs correctly |
| Blood ring, no embryo | Death in the first three days from a temperature spike, poor storage, or contamination | Verify temperature before setting; handle eggs gently |
| Embryo dead by day 14 | High temperature, wrong humidity, or infection | Check gauges and cleaning routine |
| Fully formed chick, never pipped | Low average temperature, wrong humidity, or a weak egg | Verify temperature; keep lockdown humidity at 65–70% |
| Pipped but did not finish | Humidity crash from opening the lid, or low oxygen | Keep the lid closed; check vents |
| Sticky chicks | Humidity too high | Lower humidity before lockdown |
| Shrink-wrapped chicks | Humidity too low | Raise lockdown humidity; avoid opening the lid |
| Hatch early, weak chicks | Temperature too high | Calibrate the thermometer |
| Hatch late | Temperature too low, or old eggs | Verify temperature; set eggs within 7 days |
Hatch rate troubleshooting checklist

- Verify temperature: Use a separate calibrated thermometer and hygrometer and check it twice a day.
- Check humidity daily: Adjust water channels or vents to hold 45–55%, then 65–70% at lockdown.
- Candle on day 7 and day 14: Remove clear or dead eggs. A bright LED candler such as the Incu-Bright makes this easier.
- Fix turning: Use an automatic egg turner, or turn at least three times a day and stop the last three days.
- Inspect ventilation: Keep the vents open as the manual directs.
- Clean the incubator before and after every hatch and wash your hands before handling eggs.
- Review the flock: Check breeder age, rooster ratio, and feed if eggs are clear.
- Keep a log: Record temperature, humidity, turning, and results for every batch.
Advanced ways to raise your hatch rate
- Calibrate your tools against a known standard before each hatch and replace any that read wrong. For automatic humidity control, see the HumidiKit.
- Run a test hatch with 5–10 eggs to find problems before a full batch.
- Track egg weight loss. Weigh eggs at setting and mid-incubation, and adjust humidity if loss is too high or too low.
- Use alarms or external sensors placed near the eggs to catch temperature or humidity swings.
- Match the incubator to your room. A hot room needs good ventilation. A cold room needs an incubator that holds a stable temperature.
A circulated-air incubator with a humidity readout and an automatic turner removes several of these causes at once. See our guide to the best egg incubators for chickens and small farms, and for specific stages read hatching failures explained by day and 7 tips to increase hatch rate. Hatching quail? See why quail eggs are not hatching.
FAQs (People Also Ask)
Q: What is a good hatch rate for chickens?
Ans: A good hatch rate for chicken eggs is about 80% of the eggs you set, or roughly 8 in 10. University of Missouri Extension notes that about two in ten eggs normally do not hatch. Beginners often see 60–75%, and ideal conditions can reach 85–95% of fertile eggs.
Q: What is the average hatch rate for chicken eggs?
Ans: First-time hatchers typically hatch 60–75% of the eggs they set. Experienced hatchers with stable equipment reach about 80% or more. Commercial hatcheries aim for 95% of fertile eggs, a measure called hatch of fertile.
Q: What percentage of eggs hatch in an incubator?
Ans: Under normal conditions about 80% of eggs set hatch. The number depends on fertility: if every egg is fertile and conditions are right, 85–95% can hatch. Infertile eggs, old eggs and unstable temperature or humidity pull the percentage down.
Q: How do you calculate hatch rate?
Ans: Divide the number of healthy chicks that hatched by the number of eggs you set, then multiply by 100. For example, 38 chicks from 50 eggs set is a 76% hatch rate. For hatch of fertile, divide by the number of fertile eggs instead.
Q: What is hatch of fertile?
Ans: Hatch of fertile is the percentage of fertile eggs that hatch, calculated as chicks divided by fertile eggs times 100. It removes infertile eggs from the count, so it shows how well the incubator and the incubation process performed.
Q: Why is my hatch rate low?
Ans: The most common causes are temperature that is off by even a degree, humidity that is too high or too low, eggs stored more than a week, poor turning, low flock fertility and a dirty incubator. Candle on day 7 and day 14, and use the symptom table above to find the cause.
Q: How can I increase my hatch rate?
Ans: Verify temperature and humidity with separate calibrated gauges, run the incubator empty for 24 hours before setting, set eggs within 7 days of laying, turn at least three times a day, keep the lid closed at lockdown, and clean the incubator after every hatch.
Q: Why do chicks pip but not hatch?
Ans: Chicks that pip but never finish usually hit low humidity at lockdown, a humidity crash from opening the lid, or low oxygen. Keep the incubator closed, raise humidity to 65–70% at lockdown, and wait at least 24 hours after the first pip before considering any help.
Q: How long can eggs be stored before setting?
Ans: Set eggs within 7 days of laying for the best hatch rate. Hatchability falls with age, and storage beyond two weeks hurts it. Store eggs pointed end down in a cool room around 50–60°F (10–15°C), and do not wash them first.
Q: How long does hatching take after the first pip?
Ans: Usually 12 to 24 hours from the first external pip to a fully hatched chick. A much longer delay suggests humidity problems or a weak chick. Keep the incubator closed during this time.
Q: Can room temperature or the season affect hatch rate?
Ans: Yes. A cold or hot room, drafts and direct sun cause temperature swings inside even a good incubator. Keep the incubator in a stable room, away from windows and vents, and check conditions daily in summer and winter.
Related hatching guides
- How to hatch eggs at home: a complete guide to egg incubators
- Egg incubator temperature and humidity chart
- How to maintain humidity in an incubator
- Egg candling: a day-by-day guide for beginners
- Hatching failures explained by day
- Top 7 tips to increase hatch rate
Shop Incubators, Hygrometers & Hatching Supplies
Circulated-air digital incubators, digital hygrometers, LED candlers and egg turners to help you hold the settings that give a healthy hatch rate. Backed by the 2-year IncuCare Warranty.
Sources: University of Missouri Extension, Small Flock Series: Incubation of Poultry (G8353); ThePoultrySite, Do We Understand Hatch of Fertile Correctly?; Incubator Warehouse temperature chart. Checked November 18, 2026.