Poultry Water Nipples w/ Gasket & Wing Nut
$2.99
Watering nipples are one of the best upgrades to a traditional chicken waterer. They're mess-free, so you'll spend far less time cleaning and scrubbing out poopy, dirty waterers, and more time enjoying your flock. Screw these nipples into the container of your choice (instructions provided), such as 5-gallon plastic buckets or a PVC pipe.
What sets these apart from vertical nipples: they don't drip and, because no water is stored in the nipple unit even when your bucket or drinker is full of water, they won't freeze during the winter provided you're heating your water supply.
Comes with the Incubator Warehouse 2 Year IncuCare Warranty.
Installation requires a 3/8" drill bit. Don't have one? You can get yours HERE.
Noble Nest™ Stand for Feeders & Waterers
$15.99
Folding Bucket Stand for The Noble Nest™ Feeder & Waterer. Strong and durable, holding up to 264 lbs. At 8.75 inches tall the bucket stand keeps poultry feeder and waterer off the ground and at a comfortable hight for poultry to access.
4012 - Female Hose Connector for 1/4'' Hose
$5.99
Use this fitting whenever you need to connect 1/4” hose or tubing to any water faucet that has a garden hose connection.
4080 - Low Pressure Tubing 50 ft. Coil 5/16” I.D.
$31.19
$38.99
5/16” inner diameter. Use this inexpensive tubing for low pressure systems with 5/16” fittings. Can be used to expand the low pressure waterers. Not supplied with fittings. Color: Green
4518 - Shut Off Clamps for 1/4'' and 5/16'' tubing - Package of 5
$14.99
Package of 5 Shut Off Clamps For 1/4'' & 5/16'' Tubing
4020 - Pressure Reducing Valve
$50.99
For use with drink cups. This valve can be used for a small system of 1 to 2 drinking cups or a large system designed to support up to 1500 quail. This Pressure Reducing Valve can support up to 210 drinking cups. Pre-set to provide approximately 8 lb. water pressure to drink cups. Pressure setting is adjustable. Includes 5/16'' and 1/4'' hose barbs and 2 ft. normal pressure hose with connector. (Tubing not supplied, see GQF #4028, #4080, #4081 and clamps #4010 #4014) Should not be used with nipple drinkers.
4010 - Clamps for 5/16'' Tubing - Package of 18
$7.99
Clamps used to secure 5/16'' tubing and fittings. Package of 18
4031 - Kit to Attach 5/16” Tube to a Water Tank
$11.99
Has connector with 5/16” hose barb & 3/8” pipe threads, “O” ring seal, and plastic nut with 3/8” pipe threads. Requires 11/16” hole in water tank. Tank and tubing is not supplied. May require silicone glue to prevent leaking.
4091 - Plastic Hose Splicer for 5/16'' Tubing - Package of 10
$8.39
$11.99
Use for splicing 5/16” tubing.
4027 - Normal Pressure Hose 100 ft. Coil 1/4'' I.D.
$66.99
100 ft. coil, 1/4” inner diameter. This nylon reinforced hose may be used on normal or low pressure watering systems. Generally intended for use with item 0341 & auto water troughs. Not supplied with fittings. Color: Red
4008 - Adjustable Pressure Reducing Valve with Gauge
$92.99
Water pressure gauge. Complete with 1/2”, 5/16” & 1/4” hose barbs (can be removed for attaching to 1/2” pipe). Can handle high or low volume water requirements. Reduces normal water pressure down to an adjustable 1lb. to 10 lbs. pressure. Durable design and construction.
Dimensions: 11” x 71/2” x 6”.
Note: Unit shipped may be different model, same features.
4089 - Plastic T Connectors 5/16'' x 5/16'' x 5/16'' - Package of 10
$16.09
$22.99
For use with 5/16” hose or tubing to branch off to another pen.
4030 - Kit to Attach ¼” Tube to a Water Tank
$11.99
Has connector with 5/16” hose barb & 3/8” pipe threads, “O” ring seal, and plastic nut with 3/8” pipe threads. Requires 11/16” hole in water tank. Tank and tubing is not supplied. May require silicone glue to prevent leaking.
0327 - 5 Drop Pans for Breeding Pen
$140.99
$165.99
Drop Pan for Quail breeding pens, intended to be used with GQF No. 0316 Battery Pen Stand. Captures quail droppings to protect lower quail (when used with stand) and provide easier clean up. Drop Pans should be used beneath each pen in the Battery Stand, one pan per pen. These are intended to be purchased as needed and not included with the individual GQF No. 0303 pen. This item is over-sized and has a minimum shipping weight of 30 lbs. Includes 5 Drop Pans.
Dimensions: 26” X 31”
4087 - Pipe Brackets for Drink Cups - Package of 5
$7.99
For use with 1/2" PVC pipe (not included). To use, drill 5/16" holes 8" apart in the side of PVC pipe and attach bracket with PVC adhesive. Use schedule 40 cold water PVC pipe with Pipe Brackets.
3/8 in. Drill Bit for Poultry Water Nipples
$3.99
3/8" drill bit for poultry water nipple installation. Color may vary.
4088 - Plastic T Connectors 1/2'' x 1/2'' x 5/16'' - Package of 10
$23.99
For use with 1/2'' hose or tubing when you need to run a hose to another pen. 1/2” x 1/2” x 5/16”
4068 - Plastic T Connectors 1/4'' x 1/4'' x 1/4'' - Package of 10
$12.99
For use with 1/4” hose or tubing when you need to run hose to another pen. ¼” x ¼” x ¼”
Float Kit for Bucket Waterer
$34.99
DIY Float Kit for bucket waterer.
Installing this float system to your bucket waterer and attaching it to a hose will provide your flock with an endless supply of fresh water.
Purchase includes float, hose quick connect, wrench, and 13/16" spade drill bit.
Poultry Water Nipples w/ Gasket & Wing Nut
$1.99
Watering nipples are one of the best upgrades to a traditional chicken waterer. They're mess-free, so you'll spend far less time cleaning and scrubbing out poopy, dirty waterers, and more time enjoying your flock. Screw these nipples into the container of your choice (instructions provided), such as 5-gallon plastic buckets or a PVC pipe.
What sets these apart from vertical nipples: they don't drip and, because no water is stored in the nipple unit even when your bucket or drinker is full of water, they won't freeze during the winter provided you're heating your water supply.
Comes with the Incubator Warehouse 2 Year IncuCare Warranty.
Installation requires a 3/8" drill bit. Don't have one? You can get yours HERE.
4014 - Clamps for ¼” Tubing - Package of 18
$6.99
Clamps used to secure 1/4'' tubing and fittings. Package of 18.
4067 - Plastic T Connectors 1/2'' x 1/2'' x 1/4'' - Package of 10
$14.69
$20.99
For use with 1/2'' hose or tubing when you need to run a hose to another pen. 1/2” x 1/2” x 1/4”
Poultry Water Nipples w/ Gasket & Wing Nut DIY Kit
$2.99
Watering nipples are one of the best upgrades to a traditional chicken waterer. They're mess-free, so you'll spend far less time cleaning and scrubbing out poopy, dirty waterers, and more time enjoying your flock. Screw these nipples into the container of your choice (instructions provided), such as 5-gallon plastic buckets or a PVC pipe.
What sets these apart from vertical nipples: they don't drip and, because no water is stored in the nipple unit even when your bucket or drinker is full of water, they won't freeze during the winter provided you're heating your water supply.
Comes with the Incubator Warehouse 2 Year IncuCare Warranty.
4319 - 18” Reel for Automatic Water Trough
$8.99
18” Reel for Automatic Water Trough, GQF item No. 4317.