Two Part Frame Clip For Vrooder Heater (Lower Clip & Cap)
$11.99
Need a quick, reliable fix for your Vrooder heater frame? The Celino Two-Part Frame Clip (Lower Clip & Cap) is designed for precision fit and long-lasting hold. Secure your heater rods fast, without replacing the whole frame. Product Description: Restore your Vrooder heater to full performance with this Two-Part Frame Clip. Made from high-grade, heat-resistant plastic, it snaps onto your heater frame easily, holding rods firmly in place. Ideal as a replacement or spare, this clip ensures your Vrooder heater works safely and efficiently. This Vrooder heater plastic clip is engineered for durability, resisting cracking or warping under heat. Cost-effective and eco-friendly, it’s the wise choice for DIY repairs or routine maintenance. Product Features: Precision Fit: Securely holds Vrooder heater frame rods. Two-Part Design: Includes lower clip and twist-on cap. Durable Material: Heat-resistant, crack-proof plastic. Easy Installation: Snap and twist – no tools needed. Cost-Effective Replacement: Replace only the clip, not the whole frame. Technical Details: Product Type: Frame Clip Replacement (2-piece) Material: Industrial-Grade Plastic Color: Black Compatibility: Vrooder Heater Frame only Included Components: Lower Clip + Cap Installation Method: Manual Snap & Twist Additional Information: Compatibility: Fits only Vrooder heater frames; rods and full frame not included. Maintenance: Inspect periodically and replace if worn or cracked. Usage: Ideal for DIY repairs, preventative maintenance, or spare parts. Warranty: Covered by Celino’s Two-Year IncuCare Warranty for peace of mind. Grab Now! Don’t replace the whole frame—upgrade with Celino’s Vrooder Heater Frame Clip today for a fast, secure, and affordable fix backed by a 2-year warranty.
Leg collars & Thumbscrews for Vrooder frame (Set of 4)
$11.99
Keep your Vrooder frame stable and secure with this essential set of leg collars and thumbscrews. Designed for a perfect fit, this pack of four ensures your incubator stays level, steady, and easy to adjust—without the need for tools. Built tough for long-lasting use, these parts are ideal for both replacements and upgrades. Product Description The leg collars for the Vrooder frame and thumbscrews for the Vrooder frame are engineered for strength, stability, and convenience. Whether you’re replacing worn parts or enhancing your setup, this set ensures your incubator remains solid and dependable. The knurled thumbscrews make tightening quick and tool-free, while the precision-fit leg collars lock firmly onto each frame post. With durable construction and an anti-slip grip, you can trust these components to deliver reliable performance through every hatch cycle. Perfect for poultry farmers, hatchery owners, and DIY incubator builders, this set provides a secure foundation. Product Features Exact Fit – OEM match for Vrooder frame systems Set of 4 – Includes four leg collars and four thumbscrews. Tool-Free Tightening – Adjust and lock securely by hand Durable Build – Strong metal construction with anti-slip grip Stable Support – Keeps frame level and firm during use Cost-Effective – Affordable replacement with reliable performance Technical Details Material: High-strength metal Finish: Black knurled grip thumbscrews Quantity: 4 leg collars + 4 thumbscrews Compatibility: Vrooder frame systems Additional Information Compatibility: Designed for Vrooder incubator frames Usage: Ideal for replacements, upgrades, and DIY builds Package Includes: 4 leg collars + 4 thumbscrews, ready to install Maintenance: Keep spares on hand to avoid setup delays Warranty Backed by our Two-Year IncuCare Warranty, giving you peace of mind with every purchase. Order Mow! Reinforce your Vrooder frame with confidence. Order your set of leg collars and thumbscrews today and ensure your incubator stands strong season after season.

MaticoopX Parts

MaticoopX replacement parts are matched to your exact incubator, since the MaticoopX 20 and MaticoopX 30 share a name but not most of their components. Whether you need a new turner motor, a power supply, or a replacement egg tray, we carry OEM and direct-fit parts for both models.

Most MaticoopX parts are model-specific, so double check your incubator size before ordering. The table below makes it easy to see what fits what, and every part ships backed by our warranty and EGGspert support.

Find the Right Part for Your MaticoopX 20 or 30

The MaticoopX 20 and 30 look similar, but most parts are not interchangeable between them. A handful of components are shared across both models. Everything else, including the power supply, egg trays, fans, base, and lid, is sized specifically for one model or the other.

Part MaticoopX 20 MaticoopX 30 Interchangeable?
Turner Motor Fits Fits Yes
Water Reservoir Fits Fits Yes
Humidity Sensor, Temperature Sensor, Candling Light Fits (newer style) Fits (newer style) Yes
Power Supply and Cord 5-Amp version 8-Amp version No
Egg Tray, Mesh Floor, Connecting Arm Model-specific Model-specific No
Fan and Fan Cover Model-specific Model-specific No
Base and Clear Lid Model-specific Model-specific No
Heater Not available Model-specific No

How to Identify the Part You Need

Start by checking your model number, MaticoopX 20 or 30, printed on the base of your unit. From there, match the failing component to the table above. Eggs not turning? Check the motor or connecting arm. Losing temperature or humidity? The heater, fan, or sensor is the likely cause. Cracked lid or base? Those are sold separately and are model-specific, so order the version that matches your unit exactly.

Installation and Support

Most MaticoopX parts are drop-in or plug-and-play replacements that install with basic tools in a few minutes. If you are unsure which version fits your incubator, our EGGsperts can confirm the right part before you order.

Why Shop Incubator Warehouse

Every MaticoopX part here ships with our 2-year IncuCare warranty, free shipping on orders over $25 to the contiguous US, and support from US-based EGGsperts who know these incubators part for part.

Need a different brand or a broader search? Browse our full incubator replacement parts selection or shop all egg incubator accessories.

Are you wondering which egg incubator kit is right for you?  Are you wondering what is the difference between the Hova-Bator and Little Giant incubator?  What is a fan kit and do you need one?  Or is the still air incubator fine for your hatching needs?  Do you need an egg candler and how do you use one?  What about a hygrometer for measuring humidity? 

We have the answers to all of these egg hatching questions and more to give you the information you need to select the best hatching incubator for you.  Please see our Incubator FAQ section for these and many other answers you may be interested in.

Did you know that adding a fan kit to your still air incubator is a great way to increase your hatch rate?  In the Hova Bator and Little Giant egg incubators, the heating element wraps around the inside ceiling. In a still air incubator (an incubator without a fan kit installed), the warm air naturally rises and will be warmer near the heating element.  This can cause cooler areas in your hatching incubator, especially around the corners.  The eggs in these areas may be a few degrees cooler than the surrounding eggs and will hatch later, if they hatch at all.  That is why we have developed a circulated air fan kit that will turn your Little Giant or HovaBator still air incubator into a forced-air incubator.  These kits are easy to install in an egg incubator at a reasonable price. 

A still air incubator is a very good fit for someone who is not too concerned about optimizing their hatch rate.  It also works well for incubating eggs that do better with still air, including reptile and amphibian eggs, such as snake, lizard, turtle or frog eggs.