Search results for "cabinet incubators":

The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  

4" Butterfly Vent for Cabinet Incubator (5" total diameter). Metal.

One of the common hassles with incubation is maintaining the humidity inside the incubator. These hassles include the need to frequently fill the water reservoirs or not being able to maintain the desired humidity. We are proud to introduce the HumidiKit automatic humidity system for egg incubators. This system is designed to instantly deliver accurate humidity to most incubators. The integrated digital hygrostat that measures and controls the humidity is fully adjustable so you can achieve the humidity range that is right for your eggs. The humidifier is designed to gently provide instant humidity and fresh air directly inside the incubator for an accurate humidity range. The humidifier also comes with a one liter bottle which typically needs to be filled once a week for most desktop incubators. To extend the life of your humidiKit we recommend using distilled water. This unit comes ready to install into your incubator; simply place the probes from the HumidiKit inside the incubator, insert the hose into a vent hole, fill the water bottle, and connect to power. The HumidiKit is also covered by the IncubatorWarehouse Two-Year IncuCare Warranty so you can purchase with confidence.

The No. 1502 “SPORTSMAN” incubator offers an accurate digital thermostat with LCD display of Temperature and Humidity. An on-board computer monitors systems and the environment every second to keep itself updated and to share this data with you. Electronic egg turning control, audio/visual indicators and a standard easy view door highlight a number of standard features. This is a complete incubator and hatcher. In addition to having three automatically turned racks, it has a hatching tray in the bottom of the incubator. So if you are just getting started with a small flock, all you need is this one incubator. Set the eggs each week or so and then hatch the oldest setting eggs at the same time. Settings are rotated among the three turning trays so that the hatching tray can accept the eggs from one of the setting trays each cycle. Constructed from high strength plastic board making it well insulated, quieter, and easier to clean. Each unit is hand assembled by our skilled craftsmen and tested for a full 24 hours for proper operation and calibration. Thermostat operating range between 60 and 103 degrees F. depending on room temperature. 110-120VAC, 50/60 Hz, 325 Watts. TUV Listed. This incubator includes: - 1 #3258 Digital Command Center thermostat - 3 turning racks & 1 plastic hatching tray (no cover) - 1 moisture pan with 2 wick pads - Instruction booklet. Total Capacity with plastic trays (not included): 1368 Quail Eggs, 354 pheasant eggs, 270 chicken eggs, 198 turkey or duck eggs, and 36-45 larger eggs such as goose, peafowl, and emu. Actual capacity may depend on egg size. Hatching capacity is limited to the hatching drawer which is approximately 72 medium size or 250 quail size eggs at a time. METAL SETTING TRAYS, ITEM NO.3067 ARE SOLD SEPARATELY. THIS ITEM IS NOT NECESSARY FOR OPERATION, PLEASE USE PLASTIC EGG TRAYS (0243,0245,0246,0248) SOLD SEPARATELY This incubator includes:- 1 #3258 Digital Command Center thermostat- 3 turning racks & 1 plastic hatching tray (no cover)- 1 moisture pan with 2 wick pads- Instruction booklet DIMENSIONS: 301/4” Front to Back, 153/4” Wide, 313/4” High. PLASTIC EGG TRAYS SHOWN IN IMAGE SOLD SEPARATELY.

Complete 22 Amp for Desktop or Cabinet Incubator. Includes surge guard. Adjustable between 75 and 120 degrees F (depending on room temperature). You can use this thermostat as a replacement in Hova-Bator incubators or to build your own egg incubator. 110 Volt AC Power ONLY

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating, and storing eggs. At time of setting eggs, just remove loaded egg tray from storage area and place it on the incubator turning rack. The GQF No. 1500 and 1502 incubators are equipped with turning racks that will accomodate plastic trays to hold your eggs in place. Holds any size egg from bantam, to pheasant, to medium chicken egg. Each of the No. 1502 turning racks will hold 2 universal egg trays (90 eggs) for a total of 270 eggs per incubator. (Not Stackable in GQF incubators). SET OF 6 TRAYS. COLOR MAY VARY. Please note: color may vary.  

This listing is for brand new 225 watt replacement heater coil for cabinet style egg incubators. Wire heats and cools quickly, minimizing overheating, making this an ideal choice for larger egg incubators 225 watts of power Voltage requirement: 110/120VAC Click here to see the 220V International Version. This is a substitute for GQF Part # 3014 - 225 watt coil heater in cabinet style incubators

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating, and storing eggs. At time of setting eggs, just remove loaded egg tray from storage area and place it on the incubator turning rack. The GQF No. 1500 and 1502 incubators are equipped with turning racks that will accomodate plastic trays to hold your eggs in place. Each No. 1502 turning rack will hold 4 quail egg trays (456 quail eggs). Molded posts on each tray permit double stacking for a total of 1368 quail eggs. (Caution: GQF HATCHING trays hold a maximum of 250 quail eggs). Outer edge positions of double stacked trays may not be used in top turning rack. SET OF 6 TRAYS. COLOR MAY VARY.

The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.     

Plastic egg trays offer the most efficient system for gathering, spray disinfectant treating and storing of eggs. At time of setting eggs, just remove loaded egg tray from storage area and place it on the incubator turning rack. The No. 1500 and 1502 incubators are equipped with turning racks that will accomodate plastic trays to hold your eggs in place. Each No. 1502 turning rack will hold 2 pheasant egg trays (118 pheasant eggs) for a total of 354 eggs per incubator. (Not Stackable in GQF incubators). SET OF 6 TRAYS. COLOR MAY VARY.

Replacement Alarm for GQF Cabinets 3-24V DC

This set of 4 casters will make it easier to move your cabinet incubator around for servicing, cleaning, & accessing eggs or trays. Easy to install on all cabinet models. Comes with base strips, mounting tape, & four locking casters.

220 Volt International Version. Click here to see the 110V North America Version. The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom-built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! IncuStat Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater and fan. This comes pre-set to 99.5 degrees F. Select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers, this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. To determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC-powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125-watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together, and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  

Removing the hatching tray allowed us to space the trays further apart and have them turn to a steeper angle. The No. 1500 is exempt from use as a hatcher allowing it to avoid the mess associated with hatches and remain clean. This incubator only has to maintain one humidity setting making it easier on the eggs and easier to operate. The “PROFESSIONAL” is designed to be used with the No. 1550 HATCHER. We recommend purchasing the two together. Up to three No 1500’s can be used with one hatcher for a weekly production of chicks from a laying flock. The No. 1500 incubator offers an accurate digital thermostat with LCD display of Temperature and Humidity. An on-board computer monitors systems and the environment every second to keep itself updated and to share this data with you. Electronic egg turning control, audio/visual indicators and a standard easy view door highlight a number of features. Constructed from high strength plastic board making it well insulated, quieter, and easier to clean. Each unit is hand assembled by our skilled craftsmen and tested for a full 24 hours for proper operation and calibration. Thermostat operating range between 60 and 103 degrees F. depending on room temperature. 110-120VAC, 50/60 Hz, 325 Watts TUV Listed This incubator includes: 1 #3258 Digital Command Center thermostat 3 turning racks 1 moisture pan with 2 wick pads Instruction booklet Total Capacity with plastic trays (sold separately): 1368 Quail Eggs (set and hatch 250 per week), 354 pheasant eggs, 270 chicken eggs, 198 turkey or duck eggs, and 36-45 larger eggs such as goose, peafowl, and emu. Actual capacity may depend on egg size. DIMENSIONS: 30 1/4” Front to Back, 15 3/4” Wide, 31 3/4” High. PLASTIC EGG TRAYS SOLD SEPARATELY 1243 (Quail), 1245 (Pheasant), 1246 (Chicken), 1248 (Duck/Turkey)

This kit includes all the metal parts to assemble an entire cabinet turner assembly (3 Shelf) for a DIY incubator OR replacement for GQF cabinets (1500, 1502, or 1202E). TURNER MOTOR NOT INCLUDED (Sold Separately - SKU 3175 - Turner Motor Assembly). This turner fits egg racks 1243 (Quail), 1245 (Pheasant), 1246 (Chicken), 1248 (Goose/Turkey), & 1454 (Ostrich/Emu). Screws/ Bolts to attach to cabinet incubator walls NOT included, but all hardware to attach pieces together is included.