Products

Drop Pan for Quail breeding pens, intended to be used with GQF No. 0316 Battery Pen Stand. Captures quail droppings to protect lower quail (when used with stand) and provide easier clean up. Drop Pans should be used beneath each pen in the Battery Stand, one pan per pen. These are intended to be purchased as needed and not included with the individual GQF No. 0303 pen. This item is over-sized and has a minimum shipping weight of 30 lbs. Dimensions: 26” X 31”

Drop Pan for Quail breeding pens, intended to be used with GQF No. 0316 Battery Pen Stand. Captures quail droppings to protect lower quail (when used with stand) and provide easier clean up. Drop Pans should be used beneath each pen in the Battery Stand, one pan per pen. These are intended to be purchased as needed and not included with the individual GQF No. 0303 pen. This item is over-sized and has a minimum shipping weight of 30 lbs. Includes 5 Drop Pans. Dimensions: 26” X 31”

For use in GQF No. 0427 Brooder. Fits through 1” hole. Length can adjust from 6” to 9”. To keep chicks healthy and prevent loss, set brooder temperature to 100°F and lower temperature 5°F each week to wean chicks off of needing supplemental heat.

Replacement heater and thermostat for GQF Box Brooders. 110 Volts

This brooder makes it easy to monitor chick conditions at a glance and to raise large numbers of birds in limited floor space. GQF battery brooders with clear panels are ideal for displaying all types of chicks in feed stores. Lightweight materials mean lower shipping costs as well as easy handling of drop pans. A sturdy base with rugged casters and securely fastened brooders result in a solid stack which is portable even when full of birds. Only 65” high, all five tiers of brooders are accessible and drop pans and floors can be removed for cleaning while the brooders are stacked. Brooders are designed to bring normal room temperature up to desired temperature. Brooders do not have sufficient heat to offset a cold, unheated barn. Includes 6 plug electrical outlet strip with 4 ft. cord. 110 Volt. Combined wattage: 1500W. Lids provided for all brooders. 10 attraction light bulbs included. TUV LISTED - This certification makes it perfect for use in classroom and laboratory settings. Overall Dimensions: 32” Wide, 38” Front to Back, and 65” high

Drop Pan for box brooder. Dimensions: 36” x 30”

Same as the popular GQF poultry brooder, but without heating elements and thermostat. Has sliding clear plastic door panels on front and sides along with metal top panels and drop pan.

Includes one brooder, two expanded grow off pens, brooder base, and casters. Brooder fits approximately 48 day-old chicks, and each grow off pen can hold 24 older chicks. To maximize use, put day-old chicks in brooder for warmth, feed, and water. After four weeks, rotate chicks to grow off pens and put new chicks in brooder. Height: 49” https://www.youtube.com/watch?v=gWXptRoqURM&ab_channel=GQFManufacturing

Five Grow Off Pens make up the Battery. Includes base and swivel casters. When used in a battery, only one set of lids is supplied. The Grow Off and Holding pens are stacked and bolted together on a brooder base, which has ball bearing swivel casters for easy moving of the battery. (Same as Poultry Battery Brooder but without the expense of heating elements and thermostats.) Overall Dimensions: 38'' Wide, 42'' front to back, and 65'' high

Product Features: 25 Tray Liners per Pack: Each pack contains 25 disposable tray liners, ensuring you're stocked up for multiple hatching cycles. Increased Traction for Chicks: Provides traction to safeguard newly hatched chicks during their delicate early stages.  Helps prevent splayed legs.   Enhanced Safety: Provides firm footing to prevent injuries. Durable 2-Ply Heavy Paper: Designed to withstand the hatching process while being disposable. Hygienic Protection: Treated with mild germicide for odor and bacteria control. Effortless Cleanup: Makes post-hatching maintenance fast and stress-free. Product Description: Keep your hatching process clean, safe, and efficient with the DACB Hatching Tray Liner 25-Pack. Specially designed to fit the No. 1502 and 1202E hatching drawers, these durable 2-ply heavy paper liners provide excellent traction for newly hatched chicks, ensuring their comfort and safety. The top ply is treated with a mild germicide to control bacteria, minimize odors, and maintain a hygienic environment throughout the hatching process. With firm footing for chicks, these liners promote healthy movement as they grow while offering a hassle-free cleanup solution. This helps prevent splay leg and spraddle leg from developing.  Their durable yet disposable design makes them an essential addition to your No. 1502 and 1202E incubators. Each pack includes 25 liners, measuring 13.25" x 27.69", to provide ample coverage for your trays. With their disposable design, these tray liners make post-hatching cleanup faster and easier than ever before. Whether you're a professional breeder or a hobbyist, the DACB Hatching Tray Liner is an essential tool for maintaining the cleanliness and health of your incubator setup. Why Choose the DACB Hatching Tray Liner? Cleanliness Made Simple: Say goodbye to tedious scrubbing with disposable liners that minimize maintenance time. Hatch with Confidence: Germicide treatment promotes a cleaner environment, fostering healthier chicks. Extra traction helps prevent splay leg and spraddle leg in new chicks.   Perfect Fit: Tailored for seamless use with No. 1502 and 1202E hatching drawers. Product Specifications: Liner Dimensions: 13.25" x 27.69" Material: 2-Ply heavy paper with mild germicide treatment Quantity: 25 liners per pack Compatibility: Ideal for GQF No. 1502 and 1202E incubator hatching drawers How to Use: Line the hatching drawer with one tray liner. Place the eggs as usual for hatching. After hatching, dispose of the used liner and replace it with a fresh one. Improve Your Hatching Experience Upgrade to the DACB Hatching Tray Liner 25-Pack for a cleaner, safer, and more efficient hatching process. Give your chicks a safe, tractioned start while saving time on post-hatching cleanup. Don't let cleaning hassles overshadow the joy of hatching. Order your DACB Hatching Tray Liner today and experience a smoother, more hygienic hatching process.  

Set of 4 heat element clips

Product Features: Perfect Fit for Hova-Bator Incubators: Specifically designed to replace the existing wire or plastic floor in current Hova-Bator models, ensuring a snug and seamless fit. Hygienic & Easy to Clean: The smooth plastic surface makes it easy to wash and disinfect, reducing the chances of bacteria and mold growth inside your incubator. Durable & Long-Lasting: Unlike metal wire floors that can rust or degrade over time, this high-quality plastic grid is built to withstand long-term use without losing its integrity. Safe & Hygienic Design: Provides a secure, slip-resistant surface that prevents foot injuries and helps chicks stand properly. Improved Airflow & Ventilation: The grid design allows for better airflow, helping maintain consistent temperature and humidity levels. Lightweight & Easy to Install: With its simple drop-in design, installing or replacing your incubator’s floor takes seconds and requires no special tools. Multipurpose Use: While ideal for incubators, this clear plastic grid sheet can also be used for other DIY projects, crafting, or even as a drying rack. Includes 2-Year IncuCare Warranty. Product Description: Want a safer, more efficient Hova-Bator incubator? This plastic grid floor is the perfect upgrade. Designed to replace the standard wire floor, this plastic grid sheet provides a durable, easy-to-clean surface that enhances air circulation while ensuring a safe environment for eggs and hatchlings. Unlike traditional metal wire floors, which can be difficult to clean and may pose risks to delicate hatchlings, this plastic floor grid offers a smoother, more stable surface. The clear plastic grid sheet is designed for maximum airflow and hygiene, reducing the risk of bacterial buildup while keeping your incubator in optimal condition. While this plastic grid is primarily designed for Hova-Bator incubators, its versatility makes it a valuable tool for other applications: DIY Crafting & Hobby Projects – Perfect for creative projects requiring a durable floor grid. Ventilation & Drying Racks – Works great for drying herbs, flowers, and crafts. Pet Cage Flooring – Ideal for small animal enclosures to keep bedding and waste separate. Greenhouse Flooring – Prevents water buildup and enhances airflow in plant trays. One of the biggest concerns when using a traditional wire floor in an incubator is the potential for injury. Hatchlings have fragile legs, and metal wires can cause sprains or foot issues. This plastic grid floor provides a smoother and more uniform surface, helping chicks move around comfortably without the risk of slipping or getting their feet stuck. Unlike wire floors that may rust or degrade over time, this plastic floor grid is designed for long-lasting use. Made from high-quality material, it resists wear and tear, ensuring that your incubator remains in top condition for multiple hatching cycles. Maintaining cleanliness in an incubator is crucial for the health of developing embryos and hatchlings. This non-porous plastic grid is easy to sanitize and prevents bacteria buildup. Just rinse with warm water and mild disinfectant for a quick, hassle-free cleanup. Proper ventilation is essential for incubation success. It is designed with a well-spaced grid pattern that promotes even airflow, ensuring that all eggs receive adequate oxygen. This helps create a stable, controlled environment, which maximizes hatch rates. Product Specifications: Dimensions: 15.12" x 15.12" Material: High-quality plastic Type: Clear plastic grid sheet for improved visibility and easy monitoring Compatibility: Fits current production Hova-Bator incubators Includes: 1x Plastic Grid Floor How to Use & Maintain Your Plastic Grid Floor Installation: Remove the existing wire floor from your Hova-Bator incubator. Place the plastic grid floor inside the incubator, ensuring it lays flat. Position eggs or egg trays on top of the grid. Monitor ventilation and temperature settings as usual. Cleaning Instructions: Remove it after each hatching cycle. Rinse thoroughly with warm water to remove debris. Use a mild disinfectant or incubator-safe cleaner to sanitize. Let it dry completely before reinstalling. Don't settle for outdated wire floors. Upgrade your Hova-Bator incubator today with this high-quality plastic grid floor. With better ventilation, easier cleaning, and improved hatchling safety, this is a must-have for poultry keepers, reptile breeders, and incubation enthusiasts. Order yours today and experience the benefits for yourself.

Product Features: Set of 6 Universal Egg Racks: Ideal for use with the HovaBator Automatic Egg Turner (sold separately). Holds Various Egg Sizes: Fits up to 41 quail eggs with the turner installed. Durable & Easy to Clean: Made from high-quality plastic for long-lasting use. Fits All Hova-Bator Incubators: Works with different models. 2-Year IncuCare Warranty. Product Description:  Are you looking for a reliable replacement or additional egg racks for your HovaBator automatic egg turner? This set of 6 plastic universal egg racks is the perfect solution. It fits easily into your HovaBator turner and keeps your eggs safe while they hatch. Made from high-quality plastic, these racks help eggs stay in the best condition. Whether you raise chickens for fun or as a business, these chicken racks make hatching easy and reliable. A high-quality egg rack helps to keep eggs in the right position, maintain proper egg orientation, and create the best hatching conditions. These racks let eggs turn smoothly by mimicking natural incubation processes, helping more chicks hatch. Whether you're new to hatching or have years of experience, these racks make incubation easier and more efficient. How to Use the HovaBator Universal Egg Racks Clean & Prepare: Make sure the incubator and turner are clean. Attach the Racks: Snap the 6 plastic racks into the HovaBator turner. Place Eggs: Put eggs in the racks securely. Start Incubation: Turn on the incubator; the turner will move the eggs automatically. Monitor Conditions: Keep an eye on temperature and humidity. Prepare for Hatching: Move eggs out of turner and into a hatching tray when it's time. Important Notes: Not compatible with Little Giant egg turners: These racks are specifically designed for HovaBator models. Turner not included: This set includes only the six plastic egg racks (automatic turner sold separately). Don't let broken or missing egg racks affect your incubation success. Purchase this set of 6 universal egg racks for your HovaBator automatic egg turner and keep your incubation process running smoothly.

Product Features: Set of 5 Large Egg Racks: Comes with 5 strong racks to fit larger eggs. Perfect for Larger Eggs: Suitable for duck, turkey, and goose eggs. Holds Up to 19 Eggs: Accommodates up to 19 eggs. Easy Setup: Includes instructions for configuration in your incubator's turner. Turner Not Included: Please note that the egg turner is not included with these racks. Follow the easy-to-understand instructions provided for configuring the racks in your turner. Product Description: If you're hatching duck, turkey, or goose eggs, you know that standard egg racks just don't cut it. That's where these large egg racks come in. Hatching larger eggs with regular racks can cause problems like instability, bad turning, and lower hatch rates. These large egg racks fix those issues. They are designed to hold bigger eggs securely. Whether new to hatching or a pro, these racks make your job easier. Each pack has five large egg racks to help you set up your incubator quickly. The racks are strong, lightweight, easy to clean, and will last a long time. The simple instructions make setup easy, letting you focus on getting a successful hatch every time. These egg racks give steady support during incubation if you're hatching ducks, turkeys, geese, or other large birds. Their design fits most incubators with turners, making them a useful and practical addition to your hatchling setup. Note: This pack includes egg racks only. The egg turner is NOT included.   Order  your set of 5 large egg racks today.

Product Features: Fits Hova-Bator Models: Compatible with all Hova-Bator incubators made after January 1998. Durable & Long-Lasting: Protects your incubator base from wear and tear, increasing its longevity. Easy to Clean: Removable for quick and easy cleaning. Maintains Sanitation: Keeps your incubator base clean and sanitary 2-Year IncuCare Warranty. Product Description: If you're using a Hova-Bator incubator, you know how important it is to keep it clean for the best hatching results. Over time, moisture and debris can build up in the base, making it harder to maintain a sanitary environment for your eggs. That's where the 1765 Clear Plastic Liner comes in. This simple but effective accessory fits all Hova-Bator models made after January 1998. It acts as a protective barrier for the incubator's base, helping prevent wear and tear, extending the life of your incubator, and making cleanup quick and effortless. It is clear, lightweight, and reusable, so you can keep your incubator fresh with little effort. No more scrubbing the bottom of your Hova-Bator—lift out the liner, rinse it, and you're good to go.   How to Use It: Place the plastic liner inside the base of your Hova-Bator incubator. Use the incubator as usual. Let the liner catch any mess. After hatching, remove the liner and wash it with warm soapy water. Let it dry completely, then place it back for the next batch. If you've ever struggled cleaning your incubator after a hatch, you know how much of a hassle it can be. This plastic liner makes the process much easier. Just lift it out, wash it with warm water and mild soap, let it dry, and place it back in. It's that simple. Whether you hatch eggs as a hobby, for education, or on a farm, keeping your incubator clean is key to getting healthy chicks. This liner makes maintenance easier and creates a better environment for your eggs. So, don't waste time scrubbing. Order this Hova-Bator plastic liner today.

This thermometer is included with all wafer thermostat Hova-Bator incubators produced after 2001 but may be used with any incubator. This lightweight thermometer is intended to be placed directly on top of the eggs so that it reads the temperature at egg level. Dimensions: 6.5'' X 3.5''

Our continuous element style of 21″ heat tape is superior to the “panel” version as it offers more even heat distribution and can be cut to almost any length. It can be cut to the length required.  Great for Reptile Heat Mat and Seed Starting. Will be sent as continuous length. Does NOT include wire/clip/insulator set. 30 watts per foot. Lengths of more than 25'  are not recommended.

Most of our products use 110V AC power, but we sell of lots of incubators internationally, and other countries use 220/240V AC power, so we've created a converter kit. It provides everything you need to power ONE Little Giant OR HovaBator Egg Incubator Combo Kit (Incubator, Fan Kit, and Egg Turner) internationally. This power converter kit is specially designed for continuous use (most power converters will wear out under constant use). Converts 220/240V AC power to 110V AC power, UP TO 100 Watts. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the 220/240V Voltage Converter Kit for yourself.

Product Features: Perfect for Larger Egg Incubators: Designed to provide consistent, reliable heating, this coil heater minimizes temperature fluctuations, ensuring optimal conditions for hatching. 225 Watts of Power: Just the right amount of heat for your cabinet incubator, ensuring your eggs stay warm and safe. Fast Heating & Cooling: Reduces temperature overshoot and keeps conditions stable. 110V Voltage Compatibility: Specifically designed to work with standard 110/120VAC electrical systems, making it suitable for a wide range of incubators. Fits GQF Sportsman Incubators: It has the same wattage as the GQF Sportsman Cabinet Incubators, meaning it's an excellent fit for your system. Compatible with GQF Part #3014 : This is a perfect substitute for the GQF PN 3014 heater, giving you a quick and easy replacement option. 2-Year IncuCare Warranty. Product Description:  If you're serious about incubating eggs, you know how important consistent, reliable heating is. Even small temperature fluctuations can affect hatch rates, so having the right heating element is crucial. This 225W replacement coil heater is designed specifically for cabinet-style egg incubators, ensuring even, stable heat with fast heating and cooling to minimize overheating. Whether you're replacing a worn-out heater or upgrading your incubator, this high-quality coil is a perfect fit. One of the biggest issues with some incubators is temperature overshoot, when the heating element takes too long to cool down, leading to unwanted spikes. This 225W coil heater solves that problem by heating up and cooling down quickly, keeping temperatures steady, and creating the perfect environment for hatching eggs. Designed as a direct replacement for GQF Part #3014, this coil heater provides the same wattage and efficiency as the original. That means no modifications or adjustments are needed; just swap out the old heater and install this one, and you're good to go. This heating element is built for standard US voltage (110V/120V AC), so it works seamlessly with most cabinet-style incubators. No extra wiring or adapters are needed. This coil heater is built to handle the demands of continuous incubation cycles. It's a reliable, long-term solution for anyone looking to keep their incubator in peak working condition. We stand behind our products, so this coil heater comes with a 2-year IncuCare warranty, giving you confidence in your purchase. Don't risk poor hatch rates if your incubator's heating coil is worn out or failing. Get this high-quality replacement coil heater for the cabinet egg incubator and keep your incubator running smoothly. Order yours today and ensure the best conditions for hatching success.

Power supply transformer for 1588, 2362M, 1586, and 2365 110/12 Volt Hova-Bators.

3/8" drill bit for poultry water nipple installation. Color may vary.

Product Features: Complete Replacement Kit: Includes a wafer thermostat, wing nut, adjustment screw, and a new taller mounting bracket for enhanced performance. Precise Temperature Regulation: The thermostat wafer expands and contracts with temperature changes, ensuring stable heat regulation inside your incubator. Upgraded Bracket Design: Improved height for better stability and easy mounting. Compatible with GQF Incubators: Specifically designed to work with GQF Analog Cabinet Incubators and Brooders, making it an easy replacement for outdated or damaged components. Easy to Install & Adjust: Simple screw adjustments let you fine-tune the temperature with minimal effort. Product Description: Maintaining the perfect temperature inside an incubator is crucial for successful hatching. This Thermostat Wafer Kit directly replaces GQF models 3007 & 3010, ensuring accurate and consistent temperature regulation in analog cabinet incubators and brooders. Whether you're incubating poultry, reptiles, or exotic bird eggs, this thermostat wafer provides precise control over temperature fluctuations, leading to higher hatch rates and improved incubation success. If you're experiencing temperature instability, difficulty adjusting heat levels, or outdated incubator parts, this premium replacement kit is the solution you need. What's Included in the Kit? This complete incubator thermostat wafer kit includes: 1 x Thermostat Wafer – Expands and contracts with temperature changes to provide accurate heat control. 1 x Adjustable Screw – Allows for fine-tuning temperature settings for optimal incubator performance. 1 x Wing Nut – Ensures a secure fit for easy installation and adjustment. 1 x Taller Mounting Bracket – Designed for better compatibility and improved performance over older models. This all-in-one kit makes replacing your incubator's thermostat wafer quick, easy, and hassle-free. How Does the Thermostat Wafer Work? The thermostat wafer is a simple but highly effective device in many incubators. It operates using a natural expansion and contraction process: When the incubator heats up, the wafer expands, triggering the adjustment screw to reduce heat output. When the incubator cools down, the wafer contracts, allowing the heating element to turn on again. This cycle ensures consistent temperature control, which helps for proper embryo development and a successful hatch rate. Unlike digital thermostats that use sensors, the wafer system works mechanically and is reliable. That's why both breeders and hobbyists prefer it. Why Upgrade to This Thermostat Wafer Kit? The wafer thermostat is a crucial component in any incubator. It controls the internal temperature by expanding and contracting with heat changes. Over time, older wafers lose sensitivity, leading to temperature fluctuations that can negatively impact hatching rates. By replacing outdated models 3007 & 3010 with this new and improved kit, you benefit from: More precise temperature control for higher hatch success. Increased durability for long-term performance. Improved performance with the taller bracket upgrade. Step-by-Step Installation Guide Remove the old thermostat wafer from your incubator. Attach the new mounting bracket securely. Insert the new thermostat wafer and fasten it with the wing nut. Adjust the screw to fine-tune temperature settings. Test your incubator to ensure the correct heat levels are maintained.   A faulty thermostat wafer can ruin a hatching cycle. Don't take the risk. This thermostat wafer kit ensures your incubator runs smoothly, providing the perfect conditions for healthy hatchlings. Order Now.

For incubators and brooders. Indicates when heat is on. 110 volt. Fits 1/2'' hole.  Direct Replacement for HovaBator 1602N

Product Features: Superior Accuracy: Officially rated as one of the most accurate incubator thermometers by GQF. Easy External Readings: Features a 4-inch stem that fits into a 5/32" hole, allowing you to monitor the temperature from outside the incubator. Wide Temperature Range: Measures from 25°F to 125°F, with one-degree increments for precise tracking. Clear, Large Display: The 2-inch dial display makes temperature readings quick and convenient. Wet Bulb Functionality for Humidity Control: Comes with pre-attached wicks that absorb water from the humidity pan, allowing you to determine relative humidity levels accurately. Designed for Circulated Incubators: This thermometer should be used exclusively in forced-air incubators for best results. Includes 2 Year Incucare Warranty. Product Description: Maintaining the correct temperature and humidity levels inside an incubator is essential for successful egg incubation. Whether you are breeding poultry, reptiles, or exotic birds, accurate environmental control is key to achieving high hatch rates. This GQF Incubator Thermometer / Hygrometer is a top-tier instrument designed to provide highly precise temperature and humidity readings, ensuring an optimal incubation environment. This wet bulb thermometer is an industry favorite due to its accuracy, easy readability, and durable construction. It is specifically designed for use in circulated air incubators, where a fan evenly distributes heat and humidity, allowing for precise measurements that can significantly impact the success of your hatch. This thermometer is equipped with a wet bulb system, which accurately measures relative humidity. It comes with attached wicks, which must be placed in a water-filled humidity pan. As the water evaporates from the wick, the thermometer measures the cooling effect, allowing you to calculate humidity levels precisely using a wet bulb chart. Unlike traditional digital hygrometers, the wet bulb method is more reliable and consistent in measuring humidity, making it ideal for serious breeders and hatchery operators. This thermometer is one of the most accurate incubator thermometers available. It is manufactured by GQF, a trusted name in incubation equipment. It features a 4-inch (10 cm) stainless steel stem designed to be inserted through a 5/32-inch hole in your incubator. This allows for easy external monitoring without opening the incubator, preventing unnecessary heat and humidity loss. The temperature scale ranges from 25°F to 125°F (-4°C to 52°C) and is marked in 1-degree increments, allowing for precise adjustments to your incubator’s settings. Unlike small digital displays that can be difficult to read, this thermometer features a large, 2-inch analog dial. The clear, high-contrast markings ensure that temperature readings are visible at a glance, even in dimly lit incubator rooms. The 4-inch probe will be inserted through a small pre-drilled hole in your incubator, ensuring a secure and stable fit. This allows continuous monitoring without opening the incubator door, helping maintain stable temperature and humidity. Why Choose the Hova-Bator GQF Incubator Thermometer? Unlike digital thermometers and hygrometers, which can be affected by battery life, calibration issues, or sensor degradation, the Hova-Bator GQF Incubator Thermometer / Hygrometer provides consistent, reliable, and highly accurate readings. This professional-grade thermometer is trusted by poultry, reptile breeders, and hatchery operators worldwide. It is the best choice if you need a dependable, long-lasting solution for monitoring your incubator. How to Use the Wet Bulb Thermometer in Your Incubator Insert the Thermometer – Place the 4-inch probe into the 5/32-inch hole in your incubator. Position the Wick – Ensure the wick is in the humidity pan and properly soaked for accurate wet bulb readings. Read the Temperature – Check the 2-inch dial for accurate readings in one-degree increments. Determine Humidity Levels – Use a wet bulb temperature chart to calculate relative humidity based on the wet bulb reading. Maintain Proper Incubation Conditions – Adjust temperature and humidity as needed for optimal hatching success. Important Notes Before Purchase: For Circulated Air Incubators Only – This thermometer is designed specifically for incubators with fan-driven airflow. It is not recommended for still-air incubators, as the readings may not be accurate. Requires Knowledge of Wet Bulb Readings – This thermometer is ideal for experienced users who understand how to calculate humidity using wet bulb temperatures. If unsure, refer to a wet bulb conversion chart or online humidity calculator. Invest in accurate incubation monitoring with this wet bulb thermometer. With precision temperature control and reliable humidity measurement, it is an essential tool for serious breeders. Shop now and ensure the best conditions for your incubator.

Valve/Float Assembly for cabinet incubator. Compatible with GQF 3030 Water Reserve System.

Connects turner assembly to turning trays in Professional models produced after 2007. Use GQF #3041 in Sportsman models.

Connects turner assembly to turning trays in Sportsman models produced after 2007. Use #3040 in professional models.

Vertical back support for cabinet incubators

Horizontal Support Bar for cabinet incubators

Product Features: Set of 4 Locking Casters: Includes 4 locking, durable rubber wheels for stability and smooth mobility. Complete Installation Kit: Includes base strips, mounting tape, and all necessary hardware for quick and easy setup. Durable and Reliable: Built to handle frequent use while protecting your incubator. Versatile Fit: Compatible with all GQF Cabinet Incubator models. Product Description: Upgrade your GQF cabinet incubator with this premium set of 4 durable locking cabinet casters, designed to enhance mobility and simplify maintenance. Whether you need to clean, service, or access your eggs and trays, these durable casters allow you to move your incubator smoothly and efficiently. Each caster has a durable rubber wheel that ensures stability and a quiet, smooth roll on various surfaces. This set is designed for all GQF cabinet models and includes everything you need for a hassle-free installation: base strips, mounting tape, and four robust casters. The durable construction ensures long-lasting performance, making these casters a valuable addition to your incubator setup. Whether you're shifting your unit for better access to eggs and trays or performing regular cleaning, these casters will transform the way you work with your incubator. Invest in convenience and stability today with this essential upgrade. Say goodbye to heavy lifting and enjoy the convenience and flexibility of easily repositioning your cabinet incubator with these reliable, high-performance casters. Specifications: Quantity: 4 Casters Material: Durable rubber wheels and durable base components Compatibility: Fits all GQF cabinet incubator models Order Now and enjoy effortless mobility and stability for your GQF Cabinet Incubator. Don't miss out; add this essential accessory to your setup today.  

Product Features: Crystal-Clear Visibility: Provides a full frontal view of the incubator interior for quick and easy inspection of the hatching process. Easy Installation: Includes hinges and latch tabs, making it simple to replace your existing door with the same 8 screws. Designed for GQF Models: Built to fit all current production cabinet incubators from GQF. Durable Design: Built for long-term use with high-quality materials that match your incubator’s performance. Product Description: Upgrade your GQF cabinet incubator with this Clear Door for New Cabinet Incubators, designed to provide a full frontal view of the incubator’s interior. With its transparent design, you can easily monitor tray turning, water levels, and the overall hatching process without opening the incubator, ensuring minimal disruption. This replacement incubator door is equipped with new hinges and latch tabs for a quick and seamless installation, requiring just 8 screws. Simply remove your existing door by unscrewing 8 screws, and replace it with this updated version using the same hardware. Perfectly designed for current production GQF cabinet model incubators, it ensures compatibility and durability. Specifications: Dimensions: 29 ¾” x 15 ½” x ½”. ⚠️ Important Notice: Please measure your existing door to ensure compatibility. This product is not suitable for models older than 5 years. Note: Door only; incubator sold separately. Delay Notice: Please allow 7–14 days for order processing. Keep your hatching process smooth and under control with this durable, easy-to-install clear door upgrade. Order now to take your incubator to the next level.   

Cover for GQF item No. 3066, Hatching Tray for cabinet model incubators.