Hova-Bator GQF Incubator Thermometer / Hygrometer (Wet Bulb) 3018 $38.99
In our opinion this thermometer should only be used by those that are familiar with Wet Bulb thermometers.  According to GQF This is the most accurate incubator thermometer available and has approximately a 4' stem which can be inserted in a 5/32' hole to permit reading of temperature from outside of incubator. The 2' dial permits easy and accurate reading of temperature and is graduated in one degree increments from 25 degrees to 125 degrees.  Wicks are attached and placed in the humidity pan to allow thermometer to read wet bulb temperatures. THIS THERMOMETER SHOULD BE USED IN CIRCULATED INCUBATORS ONLY.
Battery clip connector set for Genesis 1588 egg incubator or IncuKit Mini / IncuView $14.99
This listing is for brand new battery connector set for the Genesis 1588 and the IncuKit Mini / IncuView. This connector allows you to power your incubator with a battery.NOTE: Please select the type of connector you need from the drop-down menu The alligator style clips will easily connect to the positive and negative terminals on your 12VDC battery The barrel connector ends plugs into the power wire of the Genesis 1588 or the power port of the IncuKit DC / IncuView This is great for a back-up power supply for those who may have frequent power outages A 12VDC battery can be your primary power source for those who are off the grid Would you like to see how this is used with the Genesis 1588 and IncuKit DC / IncuView? See this short video:
IncuStat™ Basic for IncuKit XL $59.99
  Incubator Warehouse's Digital Electronic Egg Incubator Thermostat for IncuKit XL Description: This thermostat is very simple to use. Just press the up arrow to set the temperature (in 0.1 degree increments). There is a flame indicator on the screen that shows when the heater is operating. The unit has an 18 inch remote sensor that is placed inside the incubator. The white thermostat case is then mounted on the outside of the incubator. Finally you can measure the temperature right next to your eggs, not the air at the top of the incubator. This can be set to read in Celsius or Fahrenheit Comes preset to 99.5 (this means that if you lose power the thermostat will come back on set to 99.5) - Preset to 37.5 in Celsius mode Digital readout displays temperature to the tenth of a degree (examples: 98.0, 99.5) If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc Designed specifically for incubators, great for small incubators AND cabinet incubators (can switch heating elements up to 225 Watts) Remote Temperature Sensor (18 inches long) 110V AC Power Temperature Switching Differential = 0.2 degrees Fahrenheit. This means if the thermostat is set to 99.5 the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7. NOTE: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the thermal mass of your heating element and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the egg to heat or cool more than it should. As long as the up and down cycle is relatively small, is less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine! This is true with any incubator and egg configuration. Calibration Enabled. This means that you can calibrate the thermostat to a specific temperature. For example: If you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Wiring and operation instructions included. It also includes instructions for installing an incubator fan, if desired. Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds).  
-29% sale
Nurture Right 360 Hatch Divider $24.99 $34.99
Hatch Divider for Nurture Right 360. This hatch divider allows you to hatch different species or types of eggs in the same incubator and keep them separate. Mesh design allows easy airflow to maintain superior hatch results. NOT DISHWASHER SAFE
IncuView/IncuKit MINI Power Supply $33.99
Genuine power supply for the IncuView and IncuKit Mini. 110V-240V AC power input 12V 5A DC output.
Sold out
Egg Incubation Countdown/up Timer $13.99
In incubation there is a saying that “nature doesn’t lie”, which means the best way to tell if your incubator is operating correctly is by the results of the hatch. For example, if your eggs hatch early the temperature was too warm or if they are late it was too cool. With the IncubatorWarehouse.com’s Poultry Timer (p-timer) keeping track of the incubation period is simple and easy.  Simply set the timer when you set the eggs to the appropriate number of days and the p-timer will keep track of the incubation time for you.  The p-timer counts down the days and hours during incubation and once the timer reaches zero the display will begin to flash and the timer will count up.  When the eggs hatch you will know exactly if they are on time, early, or late and you will be able to make adjustments for the next time you incubate. The p-timer has a space saving compact design with an easy to read LCD display. The adhesive backing makes the p-timer easy to mount anywhere so it doesn’t get lost. The p-timer is covered by the IncubatorWarehouse.com’s one year hassle-free guarantee so you can purchase with confidence.   
Motor Arm and Bridge Pin $5.99
Motor Arm and Bridge Pin
HovaBator Genesis 1588 Replacement Thermostat Digital Control Center $88.99
This is an OEM replacement thermostat for the HovaBator Genesis 1588 egg incubator. This purchase comes with the Incubator Warehouse 2 year IncuCare Warranty. 
Sold out
100 watt tube heater | 110V heating element for egg incubators NEW $13.99
Brand new 100 watt heater. Great for mid-sized incubators. 100 watts of power Voltage requirement: 110/120VAC Standard pink female connectors will fit on the electrical ends of this heater (see video) Would you like to see how easy it is to wire this? See this short video:
Plastic Connecting Bar for HovaBator Automatic Egg Turners $5.99
Plastic Connecting Bar/Egg Racks to Motor. Replacement part for all HovaBator Egg Turners
3300 - Plastic Hatching Tray $50.99
Plastic hatching tray for current production GQF 1202A, 1402, 1450, 1502, and 1550 cabinet model incubators and hatchers. No cover necessary. Dimensions: 29'' long, 14” wide, 5'' tall
1749 - 1588 12V Heater/Fan Assembly $50.99
Replacement heater and fan assembly for GQF 1588 Genesis Hova-Bator only.
Current Style Hova-Bator Bottom $22.99
Hova-Bator must have been produced after August 2004 to accept this bottom half. May have slight discoloration or dings/dents.
Replacement Humidity Wick Pad (10 pk) $49.99
Replacement humidity wick pads for cabinet model moisture pan. Wick pads are used to raise humidity during hatch period or during setting in arid or high altitude environments. 10 Wick Pads Per Pack
Sold out
Plug 'n Play Hygrostat for humidity control in Egg Incubator, Reptile Terrarium $62.99
The Plug ‘n Play Hygrostat is a digital electronic hygrostat with remote sensor designed specifically to control the humidity level in incubators and terrariums. It's great for both tabletop and cabinet incubators and large and small terrariums.  It comes pre-wired and ready to use. You can use watering device up to 500 Watts and you can use up to three devices. Simply plug in your pump, water valve, humidifier or any other watering device into the 3-outlet plug and you’re ready to go. The humidity set point can be adjusted in 1% increments. Setting it is very simple to do.  This unit comes with a 40 inch remote sensor that can be placed inside your incubator.  It also has a remote temperature sensor so it can compensate humidity measurements for changes in temperature.  Please note: this device does not display the temperature.   Set point can be adjusted to any humidity level between 1% - 99% Runs on 110V AC and will power 110V AC devices.  If you have a DC watering device, you'll need a power converter to change AC to DC (like a laptop power supply).   Calibration enabled. This means that you can calibrate the hygrostat, if required. For example, if you have a hygrometer that you trust and the digital hygrostat reads a little different, you can calibrate the hygrotstat to match the trusted hygrometer (calibrate in 1% increments up to +/- 10%) You are able to change the hysteresis from 1% - 30%.  This means you are able to set the range of humidity that turns the power on and off.  For example, if you set a hysteresis of 5, the hygrostat will wait until the humidity level has dropped 5% below your set point before turning on the power.  It will turn off the power as soon as the level hits the set point This device can also be set to control the power for a dehumidifying device as well, if desired (only one at a time, it can't do both at a time).   You will notice in the pictures that there are two different sensor probes.  The larger one senses the moisture level.  The smaller one measures temperature so that the humidity sensor can compensate for changes in temperature. As noted above, this unit does not display temperature.   What devices can I use with this device to get water into my container?   Great question!  There are three main options to consider. 1. Water valve - use a small water valve attached to a reservoir of water that is kept above your container.  When the valve is powered on, the valve opens and water flows into your chamber. The water can fill a water reservoir in your container of flow onto a wicking pad.  2. Small water pump - A mini pump will bring water from a container kept outside the container.  This is set up similar to the water valve but the water container does not have to be kept above your container.  3. Humidifier - you can get a mini unit that could fit insider your container or a larger one that would be kept outside the container and then use flexible pipe or hose to pump the moist air into your container.  With egg incubators, be sure to find one that have low enough air flow that it will not cool off the incubator too much.   Note: It is normal for the hygrostat to turn the watering device off and still have the humidity level increase a little bit. This happens because as the power to the watering device turns off, the water that has already entered the container still needs to warm up and stabilize. The same is true when the power turns back on: the humidity may decrease a little more as the water takes time to dissipate in your container.  The amount this happens will depend on how quickly your watering device puts water (or mist) into your container.   Keep in mind that the variation in humidity levels over a short period of time is not nearly as important as the average humidity level over several days.   As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the Plug ‘n Hygrostat for yourself. Product Instructions: Plug N' Play Hygorstat
Replacement HumidiKit Tube With Adapter $5.99
Replacement tube with adapter for Humidkit.
Dimmer Cord $9.99
This dimmer switch works perfectly with Wonder Watt heat tape. This allows you to control the amount of power that goes into Wonder Watt and as a result, controls the temperature. Total length of the cord is 5 feet. Works for 110 Volt (100 watts MAX) & 220/240V (200 Watts MAX) PowerWonder Watt is a great way to heat many applications. Some examples include: Egg incubatorsReptile cagesReptile warm spotsDog housesPipesSeed germination mats Plant startsSatellite discsDesk warmerKeyboard warmerFoot warmer ...and just about anything else you can think of that you would want to warm up. This dimmer switch allows you to regulate how much power goes to the Wonder Watt heat tape so you can increase or decrease the temperataue. It can also help ensure you don't overheat the tape. Very simple to use, just plug the cord from your heat tape into the dimmer plug and then the dimmer plug into the wall. That's it! The knob turns to let you regulate how much power goes in.Let us know if you have any questions.Wondering how to configure Wonder Watt? Please see these three instructional videos. The dimmer in this listing replaces the turn-style dimmer in these videos. After you attach it to your Flex Watt, it requires NO additional wiring, just plug it in! Video #1: Shows how to attach the clips insulators. Video #2: Shows how to splice in the dimmer. Video #3: Shows how to mount Flex Watt using foil tape.
IncuKit™ XL for Cabinet Incubators from $79.99
The IncuKit XL ™ is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ unit inside. Pretty cool? Well, actually it's pretty hot and it works very well. The IncuKit XL™ series has been redesigned to provide you with more options and versatility! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor, if you choose to use one. This comes pre-set to 99.5 degrees F Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL™ can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. Do determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your incubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices. Electricity is wonderful but can be very dangerous. Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Pre-Set thermostat designed specifically for incubators by IncubatorWarehouse.com (see details below) Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate All mounting hardware Installation and operating instructions Easy to install and set up. All mounting hardware needed is included. And our step-by-step video makes it easy to install. Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in. It's so easy!!   Simple to install! See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.  
Quail Tray for IncuTurn™ Automatic Egg Turner $23.99
Purchase is for Quail Tray ONLY, Motor and mount not included. The Quail Tray for the IncuTurn™ for HovaBator has been carefully engineered and tested and will fit all current HovaBator desktop incubators**. The Quail egg tray holds quail and small bird eggs and increases egg capacity to 116 quail eggs* verses the 70 quail eggs* that the universal tray can hold . As always, all of our products are covered by our Two-year Hassle-free IncuCare Warranty. Purchase today with no worries and up-grade your IncuTurn™ for HovaBator to fit more small eggs. *Capacity may vary based on egg size **Works with all current style HovaBator Incubators, does not work with the older blocky, square style incubators The IncuTurn™ for HovaBator is not included. Quail Tray only.
AutoCoop™ Smart Door Controller $82.99
AutoCoop™ Smart Door Controller
IncuKit™ MINI for Desktop Incubators | Thermostat, Fan & Heater $69.99
Many people prefer to build their own incubators. This is a fun do-it-yourself project. We’ve found that the biggest difficulty people run into while developing their incubators is being able to find a reliable heat source and thermostat. We’ve solved this problem by creating the IncuKit™ series thermostat fan heaters. We have created the IncuKit™ MINI to turn any small container into an incubator. This provides the heat, air circulation and thermostat control you need to accurately control the environment in your container for hatching eggs. The IncuKit™ MINI comes with a proportional thermostat, built-in 40 watt heater, and a built-in fan. The proportional thermostat controls the amount of power that is supplied to the heater instead of simply turning the heater off and on. This provides more accurate temperature control than a standard off/on thermostat. The thermostat also comes preset to 99.5 degrees F which can be easily adjusted if necessary. The digital display makes it easy to read the current temperature and to make changes. The IncuKit™ MINI operates on low 12 Volt DC power and includes an AC-to-DC converter that works with both 110/120v and 220/240v power input. An optional DC turner motor can easily be added which is controlled by the control module and is fully adjustable. In case of power outages, the IncuKit™ MINI can also be powered with a 12V battery (additional battery connectors required). NOTE: You can optionally purchase the car power adapter or battery clips so you can keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. As always, all of our products are covered by our 2 Year IncuCare Warranty. Purchase today with no worries and experience the IncuKit™ MINI for yourself. How to determine the appropriate size container for the IncuKit MINI: There are several factors that determine how much power will be required to heat your container up to the appropriate temperature to hatch eggs. The size of the container, how well it is insulated, the room temperature and how much the room temperature fluctuates will all have a significant impact. The best way to determine if the IncuKit™ MINI is the right size for your container is pretty simple. Just put a 40 watt light bulb in your container (ensure it is thermally insulated since they get pretty hot!) and measure how warm your container gets. If it easily gets to at least 100 degrees F, then the IncuKit™ MINI should work. It is the user’s responsibility to determine if this product will generate enough heat for your container.   See this video for an overview of the IncuKit MINI:
Sold out
Cool-Lite Egg Candler for Testing Eggs during Hatch $20.99
Candling your own eggs is one of the most exciting and rewarding experiences during the incubation process. Being able to see the different stages of development from embryo to a full grown chick moving in its shell, is both fun and educational. The easy to use Cool-Lite Egg candler provides an effective way to candle eggs. Built with a sturdy rubber grip and five foot cord this candler is made to last. Light provided by an incandescent bulb is sealed in by the soft rubber cup which makes it easy to see inside the egg to determine fertility, even with large eggs. Easy to understand full color instructions help guide those who are candling for their first time. As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the Cool-Light egg candler for yourself. International Customers This automatic egg candler uses 110 Volt AC Power. For international customers (220/240V) please purchase the IncubatorWarehouse.com international power converter to maintain product warranty.
Bottle Adapter $3.99
Bottle adapter for Humidikit water bottle.
-31% sale
Bi-Metal Egg Incubator Thermostat Kit - Mechanical $14.69 $20.99
This is a Brand New Sammax style thermostat that works GREAT in an incubator! Included with purchase:     * Thermostat with a temperature range of 80-105 F (Long 1.5" shaft can go through thick styrofoam walls)     * Control Knob with set screw and mini screwdriver     * Lead wires with insulated connectors for thermostat     * Screw nut that screws onto the thermostat shaft to help attach to a surface or panel     * 15A rating     * Can be used with either AC or DC applications     * Comes with a wiring diagram for wiring in a fan and a heater Caution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protecting screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!
Sold out
Universal Pop Bottle Waterer for birds or small animals $4.99
Universal Pop bottle Waterers work on old fashioned snap on pop bottles and they snap on 12 or 16 ounce bottles. Waterers fits through 1'' square opening in cage or pen to supply adequate water for birds or small animals. Waterer supplied with spring to hold bottle. Please note: purchase does NOT include a bottle.
Incubator Warehouse Hatching Guide Book - Intro to Hatching $5.99
This is a printed version of our 4 Part of our Intro to Hatching YouTube Series (see video links below) Illustrated Guide to Hatching Basic introduction to incubating eggs and brooding chicks Product has references to our products but is overall very educational and informational 28 Pages See Pictures for a sneak peak YouTube Video Series Intro to Hatching Part 1/4: Setup https://www.youtube.com/watch?v=MqnbL8qTvaI&t Intro to Hatching Part 2/4: Incubation Period https://www.youtube.com/watch?v=vq8NvC2mH0U&t Intro to Hatching Part 3/4: Hatching Period https://www.youtube.com/watch?v=e3JzvNvvRpU&t Intro to Hatching Part 4/4: After Hatch https://www.youtube.com/watch?v=L7gtp3QQWgY&t
1614 - Automatic Turner for Large Eggs $61.99
During incubation, eggs must be turned several times a day to exercise the embryo and prevent the yolk from settling to one side. This automatic egg turner ensures that eggs are regularly and evenly turned and holds up to 19 larger-sized eggs. 110 Volt AC (220 Volt available for export). Dimensions: 15'' x 15'' x 3''
Replacement Heating Element for the Hova-Bator Egg Incubator - 25 Watt $26.99
25 Watt Heating Element for Hova-Bator Egg Incubator.  For replacement or can be used in DIY egg incubator. 110V AC Power. Clips not included see, available as an separate item.
Motor Arm & Bridge Pin for IncuTurn $5.99
Motor Arm & Bridge Pin for IncuTurn
Sold out
IncuStat™ Advanced for IncuKit XL $110.99
IncuStat Advanced for IncuKit XL. This device lets you add a sophisticated control module to your cabinet (or larger-style) egg incubator. This is designed to control the temperature, air circulation and automatic turner motors in your incubator. Key features- Proportional thermostat - minimizes temperature swings (see details below)- Comes pre-set to 99.5 degrees F (easily adjustable, if desired)- Electronically controlled - Digital display- Controls the heater, fan and egg turner motors (it is not required to use this module to control all accessories, if you desire not to)- Hatch timer- Thermostat is calibration enabled- 110/120v power input - Remote sensor for accurate temperature reading- Easily mounts into your incubator (see video below)- Maximum heater wattage: 300 watts (see note below if you need more power) NOTE: if your incubator needs more power than 300 watts, you have the option of using a heater that is always on in order to bump up the entire wattage inside the incubator. For example, if you think you will need about 350 watts for your incubator, you can put a 60-watt light bulb inside the incubator that is always on. Then when the heater that you are regulating with the thermostat is on, you will have enough power in your incubator. Feel free to contact us if you would like further clarification about this option. See this video to see how easy it is to install the Incubator Control Module:   What is the difference between a proportional thermostat and an on/off thermostat? An off/off style thermostat turns the heater on full power when the temperature gets too low. Then it turns it completely off when the temperature gets too high. This style creates a wider swing in temperature because the temperature has to get too high or low before the thermostat responds. The proportional style thermostat adjusts the power up and down as the temperature starts getting close to the set-point (your target temperature). It will reduce the amount of power going to the heater as the temperature gets close to the set-point. Then it will increase the power as the temperature starts falling away from the set-point. This allows the temperature swing to be much less than the on/off style thermostat. When incubating eggs, accuracy counts! That is why a proportional-style thermostat is preferred.
3012 - Motor, Fan, and Mounting Bracket $97.99
Cabinet model fan assembly for older cabinet model incubators. Includes motor, fan blade and mounting bracket.
-31% sale
Bi-Metal Egg Incubator Thermostat - Mechanical $13.99 $19.99
This is a Brand New Sammax style thermostat that works GREAT in an incubator! Included with purchase:    * Thermostat with a temperature range of 80-115 F (Long 1.5" shaft can go through thick styrofoam walls)    * Screw nut that screws onto the thermostat shaft to help attach to a surface or panel    * 15A rating    * Can be used with either AC or DC applications    * Comes with a wiring diagram for wiring in a fan and a heaterCaution: this is an electrically powered device that you will be mounting in your incubator yourself.  As with any thermostat like this, you should be sure to put a protecting screen of some kind around this to ensure the hot wires/metal is not touched.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!!
220/240V Voltage Converter Kit $19.99
Most of our products use 110V AC power, but we sell of lots of incubators internationally, and other countries use 220/240V AC power, so we've created a converter kit. It provides everything you need to power ONE Little Giant OR HovaBator Egg Incubator Combo Kit (Incubator, Fan Kit, and Egg Turner) internationally. This power converter kit is specially designed for continuous use (most power converters will wear out under constant use). Converts 220/240V AC power to 110V AC power, UP TO 100 Watts. This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the 220/240V Voltage Converter Kit for yourself.
EZ Water Filler 12 oz $7.99
The EZ Water Filler makes the task of adding water accurately to any incubator a breeze. No more spilling water, overfilling, or guessing where your water will go. 12 oz bottle with tube extension.
Sold out
Plug 'n Play Digital Electronic Thermostat with Remote Sensor $66.99
The Plug ‘n Play is a digital electronic thermostat with remote sensor designed specifically for incubators. It's great for both tabletop and cabinet incubators. It comes pre-wired and ready to use. You can use any heating element up to 225 Watts. Simply plug in your heater, heat mat, or light bulb to the 3 outlet plug outlet and you’re ready to go. The temperature can be adjusted in 0.1 degree increments. Just press the up or down arrow to set it. The screen has a flame icon that turns on when the heater is operating. This unit comes with a 24 inch remote sensor that can be placed inside your incubator. The white thermostat may be mounted on the outside of the incubator. Comes preset to 99.5 degrees F (37.5 in Celsius mode). Set point can be adjusted to any temperature between 41-113 degrees F If the temperature goes over 99.9, it reads: 00.1, 00.2, 00.3, etc. The digital readout displays temperature to the tenth of a degree (98.7, 99.4) The temperature switching differential is 0.2 degrees F. This means that if the temperature is set to 99.5 then the thermostat will turn the heat on when the thermostat sensor reads below 99.3 and turn off when the sensor reads above 99.7 110V AC Calibration enabled. This means that you can calibrate the thermostat if required. For example, if you have a thermometer that you trust and the digital thermostat reads a little different, you can calibrate the thermostat to match the trusted thermometer (calibrate in 0.1 degree increments up to +/- 5 degrees) Key lock feature allows you to set the temperature and lock the keys so it cannot be changed without unlocking the keys (keys are locked by pressing both up and down buttons for 5 seconds) Note: It is normal for the thermostat to turn the heater off and still have the air temperature increase a little bit. This happens because as the power to the heater turns off, the heater is still hot and will heat the air around it. The same is true when the heater turns back on: the temperature may decrease a little more as the heater gets back up to temperature. The amount this happens will depend on the amount of heat your heating element holds and the amount of circulation in your incubator. Keep in mind that the air temperature may vary without a negative impact to the eggs if the variation is rapid enough to not allow the eggs to heat or cool more than it should. As long as the up and down cycle is relatively small, less than a few minutes, and the average air temperature is at your target temperature, the temperature inside your egg (which is what really matters) will be just fine! This is true with any incubator and egg configuration. As always, all of our products are covered by our 2 Year IncuCare Warranty. Purchase today with no worries and experience the Plug ‘n Play Digital Electronic Thermostat for yourself.
Sold out
AutoCoop Door Controller with timer $82.99
AutoCoop Door Controller with timer makes it so you can set the time when your coop door will open and close. The easy to set digital timer allows you to set when your coop door will open and close down to the minute. The AutoCoop Door Controller is also easy and simple to install. Works with safe 12v power. Power supply not included.
Extension for IncuKit XL (1.5 Feet) $14.99
The IncuKit XL Extension allows the user to extend their fans that are attached to either the IncuStat basic or advanced IncuStat. This cord provides further flexibility for mounting and placing of either IncuStats or the Fan Heater unit reducing hassle.
Little Giant Automatic Egg Turner 6300 w Quail Rails $88.99
This egg turner is great for those who prefer a more hands off approach to incubation. This turner is designed to fit into any Little Giant incubator and requires no assembly. It includes two sets of racks 1) one set of six universal racks that will hold 41 eggs of any size (from quail to duck) 2) one set of six quail rails that will hold 120 small eggs. An electric motor gently rocks the eggs 6 times a day 30 degrees in each direction, which prevents the yolk from settling and exercises the embryo. The easily removable rails paired with a dishwasher safe plastic construction allows for easy cleaning. Additional accessories can be purchased for your incubator to enhance the hatch rate and overall experience. These include: Egg-O-Meter, IncuTherm Plus hygrometer/thermometer, and an Incu-Bright egg candler. As always all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the Little Giant automatic egg turner with quail rails for yourself. User Guide [PDF] Installation Video International Customers This automatic egg turner uses 110 Volt AC Power.  For international customers (220/240V) please purchase the IncubatorWarehouse.com international power converter or choose to have our professionals install a 220/240 Volt motor at checkout to maintain product warranty.  
Sold out
3169 - 2 Fan Heater Assembly $128.99
Aluminum wall heater with two fans for current style cabinet incubators. This is a direct replacement for any GQF 1500 series (1502, 1500, 1550) cabinet incubator. It also converts either of the two older DC fan versions to the current fan/heater model. Instructions included.
3017 - Indicator Light $8.99
For incubators and brooders. Indicates when heat is on. 110 volt. Fits 1/2'' hole.
Gentle Flow Fan for Small-Mid Size Egg Incubator 110V AC $18.99
This fan is specially designed for small to mid size incubators.  This Gentle Flow fan is perfect for keeping a uniform temperature and not drying out eggs.  This fan is made with durable ball bearings for long life. Mounting holes on each corner make mounting in your incubator very easy. Just wire into your incubator so the fan is ALWAYS on to keep your small to mid size incubator temperature uniform. 110V AC
Sold out
Power Supply for AutoCoop Door $10.49
Power Supply for AutoCoop Door Kits
Hova Bator Automatic Egg Turner w/ 6 Universal & 6 Quail Egg Racks $64.99
During incubation, eggs must be turned several times a day to prevent the yolk from settling and help exercise the embryo, but turning the eggs by hand can be very time-consuming. The Hova-Bator Automatic Egg Turner saves you time and hassle by automatically rotating the eggs 6 times per day. This model holds a total of 6 egg racks that can accommodate eggs of many sizes. The turner can hold up to 41 chicken, duck, or turkey eggs, or with quail egg racks installed, up to will 120 quail eggs. Additional accessories can be purchased for your incubator to improve your hatch rate and your overall experience, including Goose egg racks, an Egg-O-Meter thermometer, and an Incu-Bright egg candler.   This item, along with the majority of our products, is covered by our Two Year IncuCare Warranty. Purchase today with no worries and experience the Hova-Bator Automatic Egg Turner for yourself. International Customers This automatic egg turner uses 110 Volt AC Power. For international customers (220/240V), you must purchase an international power converter to maintain product warranty.
AutoCoop™ Smart Door Power Supply $11.99
AutoCoop™ Smart Door Power Supply
Sold out
Power Failure Alarm - 110V $27.99
Blue light indicates when electricity is on. When power outage occurs the alarm will sound after ten seconds and the red light will come on. The alarm will continue to sound until reset is pressed or power returns. If you have chicks or birds that need looking after when electricity goes off on a cold windy night, plug in this unit in your bedroom to wake you when the electricity goes off.   
Sold out
Car Power Adapter for IncuKit Mini & IncuView $17.99
The car power adapter allows you to keep your incubator running while on the road! This can be especially handy if you are transporting eggs or queen bee cells to their new location. Works for IncuView & IncuKit Mini (DOES NOT WORK WITH GENESIS 1588)). Requires up to 5 Amps at 12V DC
IncuKit Heating Wafer $6.99
IncuKit Heating Wafer
1643 - Heat Element Clips - Package of 4 $6.99
Set of 4 heat element clips
IncuKit™ XL for Reptile Incubators $90.99
The IncuKit XL™ for reptiles is an all-in-one kit designed to be the heart and brains of a homemade reptile incubator. It allows you to convert a cabinet-sized enclosure into an incubator! To make your own incubator, you can use anything from an old refrigerator to a custom built cabinet! Simply choose your enclosure and install your IncuKit XL™ for reptiles unit inside.  Pretty cool?  Well, actually it's pretty hot and it works very well.   The IncuKit XL™ for reptiles has been redesigned to work specifically in reptile incubators that require lower temps! The IncuKit XL™ for reptiles includes the following: Basic Thermostat module: This is a standard on/off thermostat.  This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point.  It will control the heater and fan. This comes pre-set to 99.5 degrees F but is fully adjustable to the temperature required for reptile eggs.  1 x 125 Watt Heater/Fan: This heater/fan is great for providing heat to medium to large size reptile incubators. The included wire adapter makes it so the heater and fan turn off once the desired temperature is reached. This helps to minimize the drying out of eggs and overheating the incubator. To determine if the included heater/fan unit will provide enough heat, a simple light bulb test will help.  Get light bulbs that will generate enough heat to easily warm your incubator to at least your desired temperature. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure.    Caution: this is an AC powered device that you will be mounting in your incubator yourself.  You must use a great deal of common sense when dealing with electrical devices.  Electricity is wonderful but can be very dangerous.  Use caution, common sense and if in doubt, ASK AN EXPERT!!! The IncuKit includes the following: Electronic Basic Digital Thermostat 1 x Heater/fan. Each heater and fan module includes a high-output 120mm AC fan with protective screen, an integrated 125 watt heater with built-in safety thermal switch and mounting plate Adapter extension cord for reptile incubators All mounting hardware Installation and operating instructions Easy to install and set up.  All mounting hardware needed is included.  And our step-by-step video makes it easy to install.  Just mount the heater and fan module, mount the thermostat, connect them together and then plug it in.  It's so easy!!   Simple to install!  See this instructional video to see how simple it is to install this in your home-made incubator: If you find that your particular incubator needs more air circulation (a common issue in odd-shaped incubators), we offer 92mm and 120mm AC fans.     

When evaluating the cost of an egg incubator, it is important to consider the accessories you plan to buy. There are many egg incubator accessories that can improve the incubation process.  The most common incubator accessories are egg turners, forced air fan kits, egg candlers, incubator thermostats & incubator thermometers.  Even though you can purchase a high-quality egg incubator for around $40, customers usually find it least expensive to buy an egg incubator combo kit that includes everything they need.  

Believe it or not an egg must be turned at least 2-3 times per day to prevent the embryo from sticking to the side of the shell.  This is accomplished by turning the eggs by hand or by using an automatic egg turner.  Automatic egg turners work by rocking or rolling the eggs to keep the embryo from sticking to the shell.  A very slow RPM motor is used to automate the egg turner.  

An egg candler (sometimes called an egg tester or egg testing light) is used to illuminate an egg so you can see the developing embryo inside the egg.  When using an egg candler you will be able to see the developing veins & eventually movement of the developing bird.  We believe that the best egg candler for the money is the IncuBright Egg Candler.  See pictures and instructions for using an Egg Candler.

An incubator thermostat is the most critical component inside an egg incubator.  Finding the right thermostat can be very difficult.  There are several types of incubator thermostats: Bi-metal Incubator Thermostat (sometimes called a incubator wafer thermostat), On/Off Electronic Incubator Thermostat, & Proportional Incubator Thermostat.  The most accurate and consistent type of incubator thermostat is the Proportional Incubator Thermostat because it keeps a more constant temperature by turning the power to the heater up or down instead of turning it on and off.  Bi-Metal & Electronic on/off incubator thermostats also work well, but they require the correct amount of heater wattage to avoid excess overshooting or undershooting of the incubator thermostat set-point.