Need Christmas Delivery? We can help! Contact us and we'll help you get it there in time!

IncuTherm Plus™ Hatch Monitor

Rating:
98% of 100
$19.99
In stock
SKU
1109

Features:

  • 24” cord with remote probe
  • Remote probe measures TEMPERATURE and HUMIDITY
  • Probe fits through vent holes of Little Giant & Hova-Bator incubators (Doesn't fit Genesis or Brinsea Incubators)
  • Celsius or Fahrenheit
  • Memory storage of high and low temp and humidity readings
  • Compact with LARGE LCD screen
  • Flip out stand for easy placement
  • 2 strong magnets for easy mounting (on back)
  • Battery INCLUDED (3V CR2032)

The two biggest factors in achieving a successful hatch are correct temperature and humidity. With these factors in mind, we created the IncuTherm™ series digital thermometer/hygrometers.

The IncuTherm Plus™ is able to accurately measure and display the temperature and relative humidity at the same time which can be displayed in both Fahrenheit or Celsius . The probe is placed inside the incubator.  This allows the IncuTherm Plus™ to measure temperature and humidity on the inside of your incubator and display it on the outside.  The built-in high and low memory stores the highest and lowest temperature and humidity readings since the last memory reset.  This helps you ensure ideal conditions for a successful hatch.

As always, all of our products are covered by our One-year Hassle-free Guarantee. Purchase today with no worries and experience the IncuTherm Plus™ Hatch Monitor for yourself.

More Information
SKU 1109
Weight 0.1250
Condition New
Country of Origin China
Dimensions 2.5" x 2" x 0.5"
Model TH01
Voltage North America (110/120 Volt AC)
Battery CR2032
Write Your Own Review
You're reviewing:IncuTherm Plus™ Hatch Monitor
Your Rating
Customer Questions
Will this probe fit through the hole in the top of the IncuView?

No, the probe on the IncuTherm Plus will not fit through the vent hole on an IncuView.

What is the probe dimensions?

The probe is about 2 inches long and .5 inches wide.

Will the probe unplug from the unit so that you could back feed the probe through the vent hole of a genesis 1588?

It will not unless the probe cover is removed, then you can carefully place the probe through the vent hole and the put the probe cover back on.

Is the probe designed so that the actual sensor is safe from mist or a quick spray, as might be encountered in a vivarium used for dart frogs and the like?

The probe is meant to withstand incubation temps and humidity levels, it should do just fine in a dart frog enclosure as well.

Did you find what you were looking for?
Copyright © 2009-present JP Ventures LLC & Incubator Warehouse. All rights reserved.